Published Articles and Book Chapters

Search Content of Articles

The majority of the publications listed below have links leading to an abstract. CALCE Consortium members with a CALCE Member web account can access the full text of articles through these links. Non-members wishing to access the full text may do so by obtaining a monthly CALCE Articles web account.

University students may apply here. All others may apply here.

Other publications include Books, Symposiums, and Open Forum.

[2025] [2024] [2023] [2022] [2021] [2020] [2019] [2018] [2017] [2016] [2015] [2014] [2013] [2012] [2011] [2010] [2009] [2008] [2007][2006] [2005] [2004] [2003] [2002][2001] [2000 and prior]

 

Slated for Publication in 2025

Novel Method to Determine Autocatalytic Cure Kinetics Model Constants of Dual-Reaction Thermosets, Sukrut Prashant Phansalkar, Yongrae Jang, Bongtae Han, Ran Tao, and Aaron M. Forster, Materials Science and Engineering: B, Volume 311, 2025, 117829, ISSN 0921-5107, doi.org/10.1016/j.mseb.2024.117829

Published in 2024

Magnetic Nanoparticle Aggregation and Complete De-encapsulation of Such Aggregates from a Liquid Drop Interior, Swarup Kumar Subudhi, Ghansham Rajendrasingh Chandel, Vishal Sankar Sivasankar, and Siddhartha Das, ACS Applied Materials & Interfaces 2024 16 (46), 64253-64263, doi.org/10.1021/acsami.4c13657

Quantum Computing: Navigating the Future of Computation, Challenges, and Technological Breakthroughs, Qurban A. Memon, Mahmoud Al Ahmad, and Michael Pecht, Quantum Reports, 2024, 6(4):627-663, doi.org/10.3390/quantum6040039

Reliability Analysis of SAC Solder Under Thermal Fatigue for Encapsulated GaN Packages , Ibaad Gandikota, Aniket Bharamgonda, Abhijit Dasgupta, and Patrick McCluskey, Proceedings of the ASME 2024 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, San Jose, California, USA, October 8–10, 2024, V001T03A016, doi.org/10.1115/IPACK2024-141249

Bi-Layer Encapsulant for Lower Stress Moisture Protection , I. Gandikota and F. Patrick McCluskey, IEEE 10th Electronics System-Integration Technology Conference (ESTC), Berlin, Germany, 2024, pp. 1-4, doi.org/10.1109/ESTC60143.2024.10712034.

Loose Particle Detection: The Optimal Detection Condition and Weak Loose Particle Impulse Extraction, Lei Su, Xinfang Duan, Jiefei Gu, Xinwei Zhao, Ke Li, and Michael Pecht, Mechanical Systems and Signal Processing, Volume 224, 2025, 112073, ISSN 0888-3270, DOI: doi.org/10.1016/j.ymssp.2024.112073.

Effect of Isothermal Aging on Anisotropic Creep Properties of SAC305 Single Crystals, Aniket Bharamgonda, Johnathan Martin, Yongrae Jang, Abhijit Dasgupta, Torsten Hauck, and Yaxiong Chen, 2024 23rd IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Aurora, CO, USA, 2024, pp. 1-6, DOI: doi.org/10.1109/ITherm55375.2024.10709443.

Quantile-based Long Short Term Memory Remaining Useful Life Prediction of Metal-Oxide-Semiconductor Field-Effect Transistor, Yonatan Saadon, Noam Auslander, and F. Patrick McCluskey, 2024 23rd IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Aurora, CO, USA, 2024, pp. 1-7, DOI: 10.1109/ITherm55375.2024.10709525.

Effect of Microstructural Variability on Fatigue Simulations of Solder Joints, M. Rebosolan, M. van Soestbergen, J.J.M. Zaal, T. Hauck, A Dasgupta, and B. Chen, Microelectronics Reliability, Volume 162, 2024, 115511, ISSN 0026-2714, DOI: doi.org/10.1016/j.microrel.2024.115511.

Behavior of Polymeric Substrates and Sintered Silver Printed Hybrid Electronic Assemblies Subject to Extreme Acceleration Levels and Elevated Temperatures, Hayden Richards, Hisham Abusalma, Abhijit Dasgupta, Andres Bujanda, Harvey Tsang, and Matthew Bowman, ASME Journal of Electric Packaging, December 2024; 146(4): 041121. DOI: doi.org/10.1115/1.4066833.

Sparse Denoising Method for Chip Ultrasonic Signals Based on Dual Memory-Enhanced Deep Unfolding Network, Yi Zhu, Xinfang Duan, Lei Su, Ke Li, Jiefei Gu, Xinwei Zhao, and Michael G. Pecht, 2024 IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA), Singapore, Singapore, 2024, pp. 1-6, DOI: 10.1109/IPFA61654.2024.10690883.

Core Collapse in Cylindrical Li-ion Batteries, Sai Dinesh Gelam, Sahithi Maddipatla, Carmen Chicone, and Michael Pecht, Journal of Power Sources, Volume 623, 2024, 235471, ISSN 0378-7753.

SOH Early Prediction of Lithium-ion Batteries Based on Voltage Interval Selection and Features Fusion, Simin Peng, Junchao Zhu, Tiezhou Wu, Aihua Tang, Jiarong Kan, and Michael Pecht, Energy, Volume 308, 2024, 132993, ISSN 0360-5442, DOI: doi.org/10.1016/j.energy.2024.132993.

Predictive Analytics for Prolonging Lithium-ion Battery Lifespan Through Informed Storage Conditions, Shalini Dwivedi, Aparna Akula, and Michael Pecht, Energy, Volume 308, 2024, 133052, ISSN 0360-5442, DOI: doi.org/10.1016/j.energy.2024.133052. 

Enhancing Qualification via the Use of Diagnostics and Prognostics Techniques, Abhishek Ram and Diganta Das, Quality and Reliability Engineering International, 2024; 1-13. DOI: doi.org/10.1002/qre.3634.

Effect of Lamination Process-Induced Residual Stress on the CTE of Advanced Prepregs Before and After Solder Reflow Process, Byoung-Phil Kang, Jong-Yun Lee, Jaesung Kim, Jongwoo Park, Kyu-Jin Lee, Yongrae Jang, and Bongtae Han, 2024 IEEE 74th Electronic Components and Technology Conference (ECTC), Denver, CO, USA, 2024, pp. 131-136, DOI: doi.org/10.1109/ECTC51529.2024.00031

Sparse Identification of Nonlinear Dynamics-Based Feature Extraction for Data Driven Model Predictive Control of a Buck Boost Switch Mode Power Supply, Declan P. Mallamo, Michael H. Azarian, and Michael G. Pecht, Journal of Verification, Validation and Uncertainty Quantification, August 2, 2024, 9(2): 021008 (9 pages), Pp No: VVUQ-23-1056, DOI: doi.org/10.1115/1.4065827.

Small Data Challenges for Intelligent Prognostics and Health Management: A Review, Chuanjiang Li, Shaobo Li, Yixiong Feng, Konstantinos Gryllias, Fengshou Gu, and Michael Pecht, Artificial Intelligence Review 57, 214 (2024) DOI: doi.org/10.1007/s10462-024-10820-4.

How Many Ways Can Temperature Affect Performance and Reliability of Electronic Systems?, Abhijit Dasgupta, Electronics Cooling Magazine, Summer 2024, pp 13-17.

A Reliability and Risk Assessment of Solar Photovoltaic Panels Using a Failure Mode and Effects Analysis Approach: A Case Study, Rajkumar Bhimgonda Patil, Arun Khalkar, Sameer Al-Dahidi, Rita S. Pimpalkar, Sheetal Bhandari, and Michael Pecht, Sustainability. 2024; 16(10):4183. DOI: doi.org/10.3390/su16104183.

Transitioning from Warpage "Control" to Warpage "Design": A Paradigm Shift, Sukrut Prashant Phansalkar, Bongtae Han, and Gun Lee, IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 14, no. 4, pp. 743-746, April 2024, DOI: doi.org/10.1109/TCPMT.2024.3382133.

Digital Twin-enabled Robust Production Scheduling for Equipment in Degraded State, Vibhor Pandhare, Elisa Negri, Lorenzo Ragazzini, Laura Cattaneo, Marco Macchi, and Jay Lee, Journal of Manufacturing Systems, Volume 74, 2024, Pages 841-857, ISSN 0278-6125, DOI: doi.org/10.1016/j.jmsy.2024.04.027.

Preparation of SAC305 Solder Specimens that Mimic the Microstructures of a Micro Solder Ball, You-Gwon Kim, Heon-Su Kim, Tae-Wan Kim, Seoung-Ung Ryu, Hak-Sung Kim, Yong-Rae Jang, Bongtae Han, Jun-Hyeong Lee, and Jin-Kyu Kim, 2024 IEEE 74th Electronic Components and Technology Conference (ECTC), Denver, CO, USA, 2024, pp. 2261-2266, DOI: doi.org/10.1109/ECTC51529.2024.00384.

Search for a Dual-Convergence Sparse Feature Extractor with Visualization Vibration Signals Architecture Feature for Flip-Chip Defect Detection, Yu Sun, Lei Su, Jiefei Gu, Xinwei Zhao, Ke Li, and Michael G. Pecht, IEEE Transactions on Industrial Informatics, DOI: doi.org/10.1109/TII.2024.3393553.

Book Chapter: Book Chapter: Modeling the Microstructure of Polycrystalline Sn–Ag–Cu Solders, Torsten Hauck, Yaxiong Chen and Abhijit Dasgupta, Advanced Structured Materials, vol 205. Springer, Cham. DOI: doi.org/10.1007/978-3-031-56132-0_3.

Evaluation of Manufacturer's Low-temperature Lithium-ion Battery Datasheet Specifications, Hayder Ali, Hassan Abbas Khan, and Michael Pecht, Journal of Energy Storage, Volume 91, 2024, 112063, ISSN 2352-152X, DOI: doi.org/10.1016/j.est.2024.112063.

Criteria for Solder Alloy Adoption, Deng Yun Chen, Michael Osterman, Carol Handwerker, and Sa’d Hamasha, Journal of Surface Mount Technology, 37(1), 2–7. DOI: doi.org/10.37665/smt.v37i1.41

An Experimental Investigation of Sintered Particle Effect on Heat Transfer Performance in an “Annular Flow” Evaporation Tube, Jeremy Spitzenberger, James Hoelle, Ahmed Abdulheiba, Ramy H. Mohammed, Laith Ismael, Damena Agonafer, Pengtao Wang, Stephen Kowalski, Kashif Nawaz, and Hongbin Ma, Journal of Thermal Science and Engineering Applications, Jul 2024, 16(7): 071001 (9 pages) Ppr No: TSEA-23-1496 DOI: doi.org/10.1115/1.4065259

3-Component Composite Phase Change Material (PCM) for Electronics Subject to Transient/Pulsed Heat Loads, Andoniaina M. Randriambololona, Vivek Manepalli, Rachel C. McAfee, Bidisha Ojha, Rahi Miraftab-Salo, Kidus Guye, Hyoungsoon Lee, Samuel Graham, and Damena Agonafer, IEEE Transactions on Components, Packaging and Manufacturing Technology, DOI: doi.org/10.1109/TCPMT.2024.3376234

Modelling Recrystallizaton in Oligocrystalline SnAgCu Solder Joint Under Cyclic Loading Condition, Yaxiong Chen, Torsten Hauck, Aniket Bharamgonda, and Abhijit Dasgupta, 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Catania, Italy, 2024, pp. 1-6, DOI: doi.org/10.1109/EuroSimE60745.2024.10491468.

Prediction of Variability in Vibration Durability of Oligocrystalline SnAgCu Solder Joints, Aniket Bharamgonda, Idowu Olatunji, Xiao Lin, Abhijit Dasgupta, Yaxiong Chenand, Varun Thukral, and Torsten Hauck, 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Catania, Italy, 2024, pp. 1-5, DOI: doi.org/10.1109/EuroSimE60745.2024.10491536

Deterministic Approach to Obtain Autocatalytic Cure Kinetics Model Constants by Normal Equations of Least-Squares Method, Sukrut Prashant Phansalkar and Bongtae Han, IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 14, no. 4, pp. 743-746, April 2024, DOI: doi.org/10.1109/TCPMT.2024.3382133.

Counteracting Packet Loss in Fingerprint-Based Indoor Positioning via Spatially Regularized Entropy and Ground-Truth Prior Variational Inference, Zhongyuan Lyu, Tom T. L. Chan, Gary C. M. Leung, Daniel P. K. Lun, and Michael Pecht, IEEE Sensors Journal, vol. 24, no. 9, pp. 15651-15664, 1 May 1, 2024, DOI: doi.org/10.1109/JSEN.2024.3381077

Prediction of Wind and PV Power by Fusing the Multi-stage Feature Extraction and a PSO-BiLSTM Model, Simin Peng, Junchao Zhu, Tiezhou Wu, Caichenran Yuan, Junjie Cang, Kai Zhang, and Michael Pecht, Energy, Volume 298, 2024, 131345, ISSN 0360-5442, DOI: doi.org/10.1016/j.energy.2024.131345. 

Book Chapter: Microscale Evaporation for High Heat Flux Applications, Damena D. Agonafer, Mun Mun Nahar, Binjian Ma, Zhikai Yang, Quan H. Chau, Erdong Song, Jorge Padilla, and Madhusudan Iyengar, Book Chapter in Embedded Cooling of Electronic Devices, February 2024, 35-122, DOI: doi.org/10.1142/9789811279379_0002.

Electrolyte Leakage in Cylindrical Lithium-Ion Batteries Subjected to Temperature Cycling, Sahithi Maddipatla, Lingxi Kong, and Michael Pecht, Energies 2024, 17(7), 1533; DOI: doi.org/10.3390/en17071533

Flexible and Twistable Free-standing PDMS-magnetic-nanoparticle-based Soft Magnetic Films with Robust Magnetic Properties, Swarup Kumar Subudhi, Beihan Zhao, Xinjun Wang, John Ting, Ichiro Takeuchi, Abhijit Dasgupta, and Siddhartha Das, Flexible and Printed Electronics, Volume 9, Number 1, 2024 DOI: doi.org/10.1088/2058-8585/ad2dae

In Situ Electrical Characterization of Transient Liquid-Phase Sintered Alloys, Gilad Nave and Patrick McCluskey, Journal of Electronic Materials, 53, 1239-1254 (2024) DOI: doi.org/10.1007/s11664-023-10847-3

Safety Analysis of Lithium-Ion Cylindrical Batteries Using Design and Process Failure Mode and Effect Analysis, Sahithi Maddipatla, Lingxi Kong, and Michael G. Pecht, Batteries. 2024; 10(3):76, DOI: doi.org/10.3390/batteries10030076

Flip-chip Solder Bumps Defect Detection Using a Self-search Lightweight Framework, Yu Sun, Lei Su, Jiefei Gu, Xinwei Zhao, Ke Li, and Michael G. Pecht, Advanced Engineering Informatics, Volume 60, 2024, 102395, ISSN 1474-0346, DOI: doi.org/10.1016/j.aei.2024.102395

State of Charge Estimation for a Parallel Battery Pack Jointly by Fuzzy-PI model Regulator and Adaptive Unscented Kalman Filter, Simin Peng, Yifan Miao, Rui Xiong, Jiawei Bai, Mengzeng Cheng and Michael Pecht, Applied Energy, Volume 360, 2024, 122807, ISSN 0306-2619, DOI: doi.org/10.1016/j.apenergy.2024.122807.

Digital Twin Modeling Method for Lithium-ion Batteries Based on Data-mechanism Fusion Driving, Chao Lyu, Shaochun Xu, Junfu Li, and Michael G. Pecht, Green Energy and Intelligent Transportation, 2024, 100162, ISSN 2773-1537, DOI: doi.org/10.1016/j.geits.2024.100162.

Diversity Maximization-based Transfer Diagnosis Approach of Rotating Machinery, Daoming She, Jin Chen, Xiaoan Yan, Xiaoli Zhao, and Michael G. Pecht, Structural Health Monitoring, 2024; 23(1):410-420, SN 1475-9217; DOI: doi.org/10.1177/14759217231164921.

WavePHMNet: A Comprehensive Diagnosis and Prognosis Approach for Analog Circuits, Varun Khemani, Michael H. Azarian, and Michael G. Pecht, Advanced Engineering Informatics, Volume 59, 2024, 102323, ISSN 1474-0346, DOI: doi.org/10.1016/j.aei.2023.102323.

Deep Learning Model for State of Health Estimation of Lithium Batteries Based on Relaxation Voltage, Runze Wang, Junfu Li, Xinyu Wang, Siyi Wang, and Michael G. Pecht, Journal of Energy Storage, Volume 79, 2024, 110189, ISSN 2352-152X, DOI: doi.org/10.1016/j.est.2023.110189.

Published in 2023

Investigation into Low Temperature Solder Reliability, Michael Osterman and Aaron Mendelsohn, SMTA International, 2023

The USPAE Solder Performance and Reliability Assurance Project: Test Plan, Michael Osterman, SMTA International, 2023

Influence of Substrate on Microvia Structures in Printed Circuit Boards During Reflow, Syed Mujahid Abbas, Qiang Yu, and Michael Pecht, IEEE Access, ISSN: 2169-3536, 14 Dec 2023, DOI: doi.org/10.1109/ACCESS.2023.3342906.

Identifying Key Factors In Turbofan Engine Health Degradation Using Functional Analysis, Declan Mallamo, Michael H. Azarian, and Michael G. Pecht, Annual Conference of the PHM Society, 15(1), Oct 26, 2023, DOI: doi.org/10.36001/phmconf.2023.v15i1.3572.

Reliability Assessment for Aeroengine Blisks Under Low Cycle Fatigue With Ensemble Generalized Constraint Neural Network, Chao Huang, Siqi Bu, Cheng-Wei Fei, Namkyoung Lee, and Shu Wa Kong, IEEE Transactions on Reliability, 10 Nov 2023, ISSN: 0018-9529, DOI: doi.org/10.1109/TR.2023.3324896.

Extreme Drop Durability of Sintered Silver Traces Printed With Extrusion and Aerosol Jet Processes, Hisham Abusalma, Hayden Richards, Abhijit Dasgupta, Andres Bujanda, Jian Yu, and Harvey Tsang, ASME 2023 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems October 24–26, 2023, V001T03A001, DOI: doi.org/10.1115/IPACK2023-111312.

Survivability and Reliability Testing and Modeling of Printed Hybrid Electronic (PHE) Assemblies Subject to Extreme Acceleration Levels, Hayden Richards, Hisham Abusalma, Abhijit Dasgupta, Jian Yu, Andres Bujanda, and Harvey Tsang, ASME 2023 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, October 24-26, 2023, V001T03A003 DOI: doi.org/10.1115/IPACK2023-111895.

Assessment of the FIDES Guide 2022 Electrical, Electronic, and Electromechanical Reliability Prediction Methodology, Aishwarya Gaonkar, Rajkumar B. Patil, Diganta Das, Michael H. Azarian, Bhanu Sood, and Michael Pecht, e-Prime - Advances in Electrical Engineering, Electronics and Energy, 2023, 100353, ISSN 2772-6711, DOI: 10.1016/j.prime.2023.100353.

Category-level Selective Dual-adversarial Network Using Significance-augmented Unsupervised Domain Adaptation for Surface Defect Detection, Siyu Zhang, Lei Su, Jiefei Gu, Ke Li, Weitian Wu, and Michael G. Pecht, Expert Systems with Applications, Volume 238, Part B, 2024, 121879, ISSN 0957-4174, DOI: 10.1016/j.eswa.2023.121879.

Analyzing the Influence of Processor Speed and Clock Speed on Remaining Useful Life Estimation of Software Systems, Mohammad Rubyet Islam and Peter Sandborn, arXiv:2309.12617 [cs.SE], 22 Sep 2023, DOI: 10.48550/arXiv.2309.12617.

Temperature-Humidity-Bias Testing and Life Prediction Modeling for Electrochemical Migration in Aerosol-Jet Printed Circuits, Beihan Zhao, Aniket Bharamgonda, Edwin Quinn, George Stackhouse, Jason Fleischer, Michael Osterman, Michael Azarian, Daniel Hines, Siddhartha Das, and Abhijit Dasgupta, ASME Journal of Electronic Packaging 1-55, Paper No: EP-23-1012, September 29, 2023, DOI: 10.1115/1.4063541.

A Novel Technique for Multiple Failure Modes Classification Based on Deep Forest Algorithm, John Taco, Pradeep Kundu, and Jay Lee, Journal of Intelligent Manufacturing, Volume 35, Issue 7, Page:3115-3129, 21 August, 2023, DOI: doi.org/10.1007/s10845-023-02185-2.

Grain-Scale Study of SAC305 Oligocrystalline Solder Joints: Anisotropic Elasto-Plastic Constitutive Properties of Single Crystals, Abhishek Deshpande, Aniket Bharamgonda, Qian Jiang, and Abhijit Dasgupta, ASME Journal Electronic Packaging, December 2023, 145(4): 041102 (15 pages), DOI: 10.1115/1.4063325.

Life-Prediction of SAC305/Bi-based Hybrid Solder Joint Considering Bi-Diffused Layers with Gradual Bi Concentrations, Yongrae Jang, Yu-Hsiang Yang, Bongtae Han, You-Gwon Kim, and Hak-Sung Kim, 2023 IEEE 73rd Electronic Components and Technology Conference (ECTC), Orlando, FL, USA, 2023, pp. 2001-2006, DOI: 10.1109/ECTC51909.2023.00343.

A Case Study into a Battery Company and Their 18650 Batteries, Lingxi Kong and Michael G. Pecht, e-Prime - Advances in Electrical Engineering, Electronics and Energy, Volume 6, 2023, 100294, ISSN 2772-6711, DOI: 10.1016/j.prime.2023.100294.

A Comprehensive Review of Separator Membranes in Lithium-ion Batteries, Niranjanmurthi Lingappan, Wonoh Lee, Stefano Passerini, and Michael G. Pecht, Renewable and Sustainable Energy Reviews, Volume 187, 2023, 113726, ISSN 1364-0321, DOI: 10.1016/j.rser.2023.113726.

Thermal Aging Study of Encapsulated Power Devices Under Autonomous Driving Condition and its Effect on Board Level Reliability, Yu-Hsiang Yang, Bongtae Han, and Przemyslaw Gromala, 2023 IEEE 73rd Electronic Components and Technology Conference (ECTC), Orlando, FL, USA, 2023, pp. 814-819, DOI: 10.1109/ECTC51909.2023.00141.

Time-dependent Bulk Behavior of Cured Epoxy Molding Compound, Sukrut Prashant Phansalkar, Roshith Mittakolu, and Bongtae Han, 2023 IEEE 73rd Electronic Components and Technology Conference (ECTC), Orlando, FL, USA, 2023, pp. 2093-2100, DOI: 10.1109/ECTC51909.2023.00358.

Investigation of Cure Kinetics of Advanced Epoxy Molding Compound Using Dynamic Heating Scan: An Overlooked Second Reaction, Ran Tao, Sukrut Prashant Phansalkar, Aaron M. Forster, and Bongtae Han, 2023 IEEE 73rd Electronic Components and Technology Conference (ECTC), Orlando, FL, USA, 2023, pp. 1319-1326, DOI: 10.1109/ECTC51909.2023.00225.

ESD Events to Wearable Medical Devices in Healthcare Environments-Part 1: Current Measurements, Mehdi Kohani, Javad Meiguni, David J. Pommerenke, and Michael G. Pecht, IEEE Transactions on Electromagnetic Compatibility, Volume 65, Number 4, pp. 954-959, Aug 2023, DOI: 10.1109/TEMC.2023.3272656.

Evaluation of the Safety Standards System of Power Batteries for Electric Vehicles in China, Quanqing Yu, Yuwei Nie, Simin Peng, Yifan Miao, Chengzhi Zhai, Runfeng Zhang, Jinsong Han, Shuo Zhao, and Michael G. Pecht, Applied Energy, Volume 349, 2023, 121674, ISSN 0306-2619, DOI: 10.1016/j.apenergy.2023.121674.

Ultra-thin On-chip ALD LiPON Capacitors for High Frequency Application, Kunal Ahuja, Valentin Sallaz, Ramsay Blake Nuwayhid, Frederic Voiron, Patrick McCluskey, Gary W. Rubloff and Keith E. Gregorczyk, Journal of Power Sources, Volume 575, 2023, 233056, ISSN 0378-7753, DOI: 10.1016/j.jpowsour.2023.233056.

In Situ Monitoring of Creep Deformation in Single Crystal SAC305 Solder Joint at Different Temperatures, Aniket Bharamgonda, Abhishek Deshpande, and Abhijit Dasgupta, 2023 22nd IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Orlando, FL, USA, 2023, pp. 1-4, DOI: 10.1109/ITherm55368.2023.10177604.

State-of-Charge Estimation of Lithium-Ion Batteries Based on Dual-Coefficient Tracking Improved Square-Root Unscented Kalman Filter, Simin Peng, Ao Zhang, Dandan Liu, Mengzeng Cheng, Jiarong Kan, and Michael G. Pecht, Batteries 2023, 9(8), 392, Manuscript ID: batteries-2465060, 26 July 2023, DOI: 10.3390/batteries9080392.

Evaluation of In-Service Smartphone Battery Drainage Profile for Video Calling Feature in Major Apps, Hayder Ali, Hassan Abbas Khan, and Michael Pecht, Scientific Reports 13, 20 July 2023, Article number: 11699 (2023), DOI: 10.1038/s41598-023-38859-3.

Machine Vision Pilot (MVP) and Microelectronic Authenticity and Security, Evaluation and Research (MASER), Michael H. Azarian, Diganta Das, Patricia E. Campbell, and Jeff Carlile, Final Report of the CALCE/DMEA Counterfeit Microelectronics Study (Released for public access on June 12, 2023).

Direct Visualization of Nanoparticle Morphology in Thermally Sintered Nanoparticle Ink Traces and the Relationship Among Nanoparticle Morphology, Incomplete Polymer Removal, and Trace Conductivity, Ghansham Rajendrasingh Chandel, Jiayue Sun, Sai Ankit Etha, Beihan Zhao, Vishal Sankar Sivasankar, Shakiba Nikfarjam, Mei Wang, Daniel R Hines, Abhijit Dasgupta, Taylor Woehl, and Siddhartha Das, Nanotechnology, Volume 34, Number 36, 19 June 2023, 365705, DOI: 10.1088/1361-6528/acd9d2.

2-kV 1-MW 20,000-RPM Integrated Modular Motor Drive for Electrified Aircraft Propulsion, Jin Wang, Thomas Jahns, Patrick McCluskey3, John Kizito, Bulent Sarlioglu, Robert Borjas, James Swanke, Yizhou Cong, Zhaoxi Yao, Hao Zeng, Pengyu Fu, and Alec Schnabel,  Journal of Emerging and Selected Topics in Power Electronics, 07 June 2023, ISSN: 2168-6777, DOI: 10.1109/JESTPE.2023.3283538.

Accurate Prediction of Remaining Useful Life for Lithium-ion Battery Using Deep Neural Networks With Memory Features, Muhammad Osama Tarar, Ijaz Haider Naqvi, Zubair Khalid and Michael G. Pecht,  Electrochemical Energy Conversion and Storage, Volume 11, 2023, DOI: 10.3389/fenrg.2023.1059701.

Interpretable Fault Prognostics for Switch Mode Power Supplies, Declan Mallamo, Michael H. Azarian, and Michael Pecht,  2023 IEEE Green Technologies Conference (GreenTech), TS11: Modeling, Control, and Optimization of Energy Systems.

Reliability Analysis of the Multi-state System With Nonlinear Degradation Model Under Markov Environment, Hao Lyu, Hongchen Qu, Hualong Xie, Yimin Zhang, and Michael Pecht,  Reliability Engineering & System Safety, Volume 238, October 2023, 109411, DOI: 10.1016/j.ress.2023.109411.

Novel Feature Selection Strategy for Cyclic Loss Prediction of Lithium-ion Electric Vehicle Battery, Huzaifa Rauf, Muhammad Khalid, Naveed Arshad, and Michael G. Pecht; 2023 IEEE Power & Energy Society General Meeting (PESGM), Orlando, FL, USA, 2023, pp. 1-6, DOI: 10.1109/PESGM52003.2023.10253190.

A Novel 3-Probability Spaces Logic Decoupling Distillation for Flip-Chip Defect Detection, Yu Sun, Lei Su, Jiefei Gu, Ke Li, and Michael Pecht, Transactions on Instrumentation and Measurement, 23 June 2023, DOI: 10.1109/TIM.2023.3284130.

Health and Lifespan Prediction Considering Degradation Patterns of Lithium-ion Batteries Based on Transferable Attention Neural Network, Aihua Tang, Yihan Jiang, Yuwei Ni, Quanqing Yu, Weixiang Shen and Michael Pecht,  Energy, Volume 279, September 2023, 128137, DOI: 10.1016/j.energy.2023.128137.

Physics-Informed Sparse Neural Network for Permanent Magnet Eddy Current Device Modelling and Analysis, Dazhi Wang, Sihan Wang, Deshan Kong, Jiaxing Wang, Wenhui Li and Michael Pecht,  Magnetics Letters, 22 June 2023, DOI: 10.1109/LMAG.2023.3288388.

Challenges and Outlook for Lithium-ion Battery Fault Diagnosis Methods From the Laboratory to Real World Applications, Quanqing Yu, Can Wang, Jianming Li, Rui Xiong, and Michael Pecht,  eTransportation, 29 May 2023, DOI: 10.1016/j.etran.2023.100254.

Effect of Elastic-Plastic Anisotropy of Solder Grains on Variability of Cyclic Mechanical Bending Durability in SAC305 CSP Assembly, Aniket Bharamgonga, Dr. Abhijit Dasgupta, Dr. Abhishek Deshpande, Torsten Hauck, and Yaxiong Chen,  Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), 17 April 2023, 107577, DOI: 10.1109/EuroSimE56861.2023.10100850.

A Novel Smart Feature Selection Strategy of Lithium-ion Battery Degradation Modelling for Electric Vehicles Based on Modern Machine Learning Algorithms, Huzaifa Rauf, Muhammad Khalid, and Naveed Arshad,  Journal of Energy Storage, Volume 68, 15 September 2023, 107577, DOI: 10.1016/j.est.2023.107577.

Multi-objective Reliability and Cost Optimization of Fuel Cell Vehicle System with Fuzzy Feasibility, Mohamed Arezki Mellal, Enrico Zio, and Michael G. Pecht, Information Sciences, Volume 640, 2023, 119112, DOI:10.1016/j.ins.2023.119112

Method of Site Selection and Capacity Setting for Battery Energy Storage System in Distribution Networks with Renewable Energy Sources, Simin Peng, Liyang Zhu, Zhenlan Dou, Dandan Liu, Ruixin Yang, and Michael G. Pecht, Battery Design and Management, Energies 2023, 16(9), 3899, DOI:10.3390/EN16093899

One-fault-shot Learning for Fault Severity Estimation of Gears that Addresses Differences between Simulation and Experimental Signals and Transfer Function Effects, Omri Matania, Lior Bachar, Varun Khemani, Diganta Das, Michael H. Azarian and Jacob Bortman, Advanced Engineering Informatics, Volume 56, 2023, 101945, ISSN 1474-0346, DOI: 10.1016/j.aei.2023.101945

FEPPCON XI - Part II: Reliability of Power Electronic Systems, Huai Wang, Michael Pecht, Axel Mertens, Rik DeDoncker and Frede Blaabjerg, IEEE Power Electronics Magazine, Volume 10, Issue 1, March 2023, ISSN: 2329-9215 DOI: 10.1109/MPEL.2023.3236463

Intelligent Defect Inspection of Flip Chip Based on Vibration Signals and Improved gcForest, Lei Su, Xiao Hu, Jiefei Gu, Yong Ji, Gang Wang, Xuefei Ming, Ke Li and Michael Pecht, Measurement, Volume 214, 2023, 112782, ISSN 0263-2241, DOI: 10.1016/j.measurement.2023.112782.

Machine Learning Techniques Suitability to Estimate the Retained Capacity in Lithium-ion Batteries from Partial Charge/Discharge Curves, Hector Beltran, Emilio Sansano and Michael Pecht, IEEE Transactions on Transportation Electrification, DOI: 10.1109/TTE.2023.3252169.

Dynamic Material Characterization Through In-Situ Electrical Resistivity Measurements of High-Temperature Transient Liquid Phase Sinter Alloys, Gilad Nave and Patrick McCluskey, TMS 2023 152nd Annual Meeting & Exhibition Supplemental Proceedings, The Minerals, Metals & Materials Series, pg 897-908, 2023, ISBN 978-3-031-22524-6, DOI: 10.1007/978-3-031-22524-6_83

An Enterprise Network Model for Understanding and Disrupting Illicit Counterfeit Electronic Part Supply Chains, Hirbod Akhavantaheri, Peter Sandborn and Diganta Das, Institute of Industrial and Systems Engineers Transactions, Pg: 1-12, March 2023, DOI: 10.1080/24725854.2023.2172631

Demonstration of a Response Time Based Remaining Useful Life (RUL) Prediction for Software Systems, Mohammad Rubyet Islam and Peter Sandborn, Journal of Prognostics and Health Management, Volume 3, No. 1, February 2023, DOI: 10.22215/jphm.v3i1.3641

An Additively Manufactured Manifold-microchannel Heat Sink for High-heat Flux Cooling, Daeyoung Kong, Euibeen Jung, Yunseo Kim, Vivek Vardhan Manepalli, Kyupaeck Jeff Rah, Han Sang Kim, Yongtaek Hong, Hyoung Gil Choi, Damena Agonafer, and Hyoungsoon Lee, International Journal of Mechanical Sciences, Volume 248, 2023, 108228, ISSN 0020-7403, DOI: 10.1016/j.ijmecsci.2023.108228.

Techno-Economic Framework for Electric Vehicle Battery Swapping Stations, M. O. Tarar, N. U. Hassan, I. H. Naqvi, and Michael Pecht, IEEE Transactions on Transportation Electrification, DOI: 10.1109/TTE.2023.3252169.

Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures, Beihan Zhao, Vishal Sankar Sivasankar, Swarup Kumar Subudhi, Abhijit Dasgupta, and Siddhartha Das, ACS Journal of Applied Nano Materials 2023 6 (2), 1459-1474, DOI: 10.1021/acsanm.2c05423

Improving the lifetime of mechanical systems during transit established on quantum/transport life-stress prototype and sample size, Seong-woo Woo, Dennis L. O'Neal, and Michael Pecht, Mechanical Systems and Signal Processing, Volume 193, 2023, 110222, ISSN 0888-3270, DOI: 10.1016/j.ymssp.2023.110222.

Machine Vision Pilot (MVP) Counterfeit Microelectronics Policy Analysis, Patricia E. Campbell, Excerpted from Section 843 Machine Vision Pilot Program Report Generation and Policy Analysis (MVP) Report, Submitted to DMEA on 22 December 2020, Michael H. Azarian (PI) and Diganta Das (co-PI).

A Novel Method of Discharge Capacity Prediction Based on Simplified Electrochemical Model-aging Mechanism for Lithium-ion Batteries, Junya Shao, Junfu Li, Weizhe Yuan, Changsong Dai, Zhenbo Wang, Ming Zhao and Michael Pecht, Journal of Energy Storage, Volume 61, 2023, 106788, ISSN 2352-152X, DOI: 10.1016/j.est.2023.106788.

Rotating Machinery Fault Detection and Diagnosis Based on Deep Domain Adaptation: A Survey, Siyu ZHANG, Lei SU, Jiefei GU, Ke LI, Lang ZHOU and Michael PECHT, Chinese Journal of Aeronautics, Volume 36, Issue 1, 2023, Pages 45-74, ISSN 1000-9361, DOI: 10.1016/j.cja.2021.10.006.

A Novel Graph-based Framework for State of Health Prediction of Lithium-ion Battery, Xing-Yan Yao, Guolin Chen, Michael Pecht, and Bin Chen, Journal of Energy Storage, Volume 58, 2023, 106437, ISSN 2352-152X, DOI: 10.1016/j.est.2022.106437.

Assessment of the Calendar Aging of Lithium-ion Batteries for a Long-term—Space Missions, Hayder Ali, Hector Beltran, Nancy J. Lindsey, and Michael Pecht, Frontiers in Energy Research, 07 February 2023, Sec. Electrochemical Energy Conversion and Storage, Volume 11 - 2023, DOI: 10.3389/fenrg.2023.1108269

An Improved Orthogonal Matching Pursuit Method for Denoising High-frequency Ultrasonic Detection Signals of Flip Chips, Lei Su, Shihong Tan, Yang Qi, Jiefei Gu, Yong Ji, Gang Wang, Xuefei Ming, Ke Li, and Michael Pecht, Mechanical Systems and Signal Processing, Volume 188, 2023, 110030, ISSN 0888-3270 DOI: 10.1016/j.ymssp.2022.110030.

Reliability Analysis of Dependent Competing Failure Processes with Time-varying δ Shock Model, Hao Lyu, Hongchen Qu, Zaiyou Yang, Li Ma, Bing Lu, and Michael Pecht, Reliability Engineering & System Safety, Volume 229, 2023, 108876, ISSN 0951-8320, DOI: 10.1016/j.ress.2022.108876.

Lithium-Ion Battery Strain Gauge Monitoring and Depth of Discharge Estimation, Christopher Hendricks, Bhanu Sood, and Michael Pecht, February 2023,  ASME. Journal of Electrochemical Energy Conversion and Storage, Vol. 20, Issue 1, 01100, DOI: 10.1115/1.4054340.

 

 

Published in 2022

AI-Based Reliability Assessment of Power Electronic Systems, F. Patrick McCluskey, Clifton Buxbaum, Sudip K. Mazumder, Arif Sarwat, Matt Ursino, and Miles C. Russell, ASME 2022 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. Garden Grove, California, USA. October 25-27, 2022. V001T10A015. ASME. DOI: 10.1115/IPACK2022-97614

How Gas Generates in Pouch Cells and Affects Consumer Products, F. Ryan Aalund, Bhavana Endreddy, and Michael Pecht, Frontiers in Chemical Engineering, 4, 828375. DOI: 10.3389/fceng.2022.828375

On the Viscoelastic Property Measurement of Filled Polymers by Dynamic Mechanical Analyzer (DMA), Sukrut Prashant Phansalkar, Bongtae Han, Ehsan Akbari, and Paulius Vaitiekunas, ASME 2022 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. Garden Grove, California, USA. October 25-27, 2022. V001T05A004. ASME. DOI: 10.1115/IPACK2022-97719

A Multi-model Feature Fusion Model for Lithium-ion Battery State of Health Prediction, Xing-Yan Yao, Guolin Chen, Liyue Hu, and Michael Pecht, Journal of Energy Storage, Volume 56, Part B, 2022, 106051, ISSN 2352-152X, DOI: 10.1016/j.est.2022.106051.

Length-Scale Effects in Average Viscoplastic Behavior of Sintered Silver Materials: Empirical Exploration With Indentation Methods, David Leslie, Abhijit Dasgupta, and Andrei Damian, ASME 2022 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. Garden Grove, California, USA. October 25-27, 2022. V001T03A003. ASME. DOI: 10.1115/IPACK2022-97363

Drop Durability of Printed Hybrid Electronic (PHE) Assemblies Under Extreme Acceleration Level, Hisham Abusalma, Abhijit Dasgupta, Jian Yu, Andres Bujanda, and Harvey Tsang, ASME 2022 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. Garden Grove, California, USA. October 25-27, 2022. V001T03A003. ASME. DOI: 10.1115/IPACK2022-97382

Anisotropic Plastic Constitutive Properties of SAC305 Single Crystal Solder Joints, Abhishek Deshpande, Qian Jiang, and Abhijit Dasgupta, ASME 2022 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. Garden Grove, California, USA. October 25-27, 2022. V001T10A003. ASME. DOI: 10.1115/IPACK2022-94505

Electro-Chemical Migration in Aerosol-Jet Printed Electronics Using Temperature-Humidity and Water Droplet Testing Methods, Beihan Zhao, Aniket Ajitkumar Bharamgonda, Eric Jennings, Robert G. Utter, Michael Osterman, Michael H. Azarian, Siddhartha Das, Abhijit Dasgupta, Jason Fleischer, Edwin Quinn, and Daniel Hines, ASME 2022 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. Garden Grove, California, USA. October 25-27, 2022. V001T10A001. ASME. DOI: 10.1115/IPACK2022-92306

Multi-scale Crystal Viscoplasticity Approach for Estimating Anisotropic Steady-State Creep Properties of Single-Crystal SnAgCu Alloys, Qian Jiang, Abhishek Deshpande, and Abhijit Dasgupta, International Journal of Plasticity, Volume 153, 2022, 103271, ISSN 0749-6419, DOI: 10.1016/j.ijplas.2022.103271.

Applications, Fluid Mechanics, and Colloidal Science of Carbon-Nanotube-based 3D Printable Inks, Beihan Zhao, Vishal Sankar Sivasankar, Swarup Kumar Subudhi, Shayandev Sinha, Abhijit Dasgupta, and Siddhartha Das, Nanoscale, 2022, 14, 14858-14894, DOI: 10.1039/D1NR04912G

Physically Soft Magnetic Films and Devices: Fabrication, Properties, Printability, and Applications, Anjali Dhamsania, William Mah, Arjun Sivarajan, John Ting, Stephen Chung, Elizabeth Carlson, Alex Wang, Gillian Lee, Bryan Huynh, Anson Chen, Lillian Mueller, Caius Kim, Swarup Kumar Subudhi, Beihan Zhao, Bhargav Sai Chava, and Siddhartha Das, Journal of Materials Chemistry C, 2022, 10, 6563-6589, DOI: 10.1039/D2TC00388K

Role of Nominal Stress State on Cyclic Fatigue Durability of SAC305 Grain-Scale Solder Joints, Abhishek Deshpande, Qian Jiang, Abhijit Dasgupta and Ulrich Becker, ASME. Journal of Electronic Packaging September 2022; 144(3): 031006. DOI: 10.1115/1.4051647

Copper Trace Failures in Ball Grid Array (BGA) Packages under Sequential Harmonic Vibration and Temperature Cycling, Abhishek Deshpande, Idowu Olatunji, Manuel Bascolo, Abhijit Dasgupta, and Ulrich Becker, 21st IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (iTherm), 2022, pp. 1-5, DOI: 10.1109/iTherm54085.2022.9899525.

Cooling Jacket for High Power Density Segmented Electric Motor, Zhaoxi Yao, Raphael Kahat Mandel, and F. Patrick McCluskey, 2022 IEEE Transportation Electrification Conference & Expo (ITEC), 2022, pp. 1082-1086, DOI: 10.1109/ITEC53557.2022.9814076

In-slot Cooling for High Power Density Electric Motor with Encapsulation Channels, Zhaoxi Yao, Raphael Kahat Mandel, and F. Patrick McCluskey, 2022 21st IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (iTherm), 2022, pp. 1-6, DOI: 10.1109/iTherm54085.2022.9899559

Effect of Temperature on Vibration Durability of Lead-free Solder Joints, Robert Höhne, Karsten Meier, Abhijit Dasgupta, David Leslie, Maximilian Ochmann and Karlheinz Bock, Microelectronics Reliability, Volume 139, December 2022, 114824, ISSN 0026-2714, DOI: 10.1016/j.microrel.2022.114824

Degradation Modes and Mechanisms Analysis of Lithium-ion Batteries with Knee Points, Weiping Diao, Jonghoon Kim, Michael H. Azarian and Michael G. Pecht, Electrochimica Acta, Volume 431, September 2022, 141143, DOI:10.1016/j.electacta.2022.141143

Preprocessing of Spent Lithium-ion Batteries for Recycling: Need, Methods, and Trends, Hayder Ali, Hassan Abbas Khan, and Michael G. Pecht, Renewable and Sustainable Energy Reviews, Volume 168, 2022, 112809, ISSN 1364-0321, DOI:10.1016/j.rser.2022.112809

Efficient Identification of Jiles–Atherton Model Parameters Using Space-Filling Designs and Genetic Algorithms, Varun Khemani, Michael H. Azarian, and Michael G. Pecht, Eng, Vol 3, No.3, 2022, pp. 364-372, DOI: 10.3390/eng3030026

A Siamese Hybrid Neural Network Framework for Few-shot Fault Diagnosis of Fixed-wing Unmanned Aerial Vehicles, Chuanjiang Li, Shaobo Li, Ansi Zhang, Lei Yang, Enrico Zio, Michael Pecht, Konstantinos Gryllias, Journal of Computational Design and Engineering, July 2022, qwac070, DOI: 10.1093/jcde/qwac070

Analysis of the Life-cycle Cost and Capability Trade-offs Associated with the Procurement and Sustainment of Open Systems, Shao-Peng Chen, Peter Sandborn and William Lucyshyn, International Journal of Product Lifecycle Management, Vol. 14, No.1, pp. 40-69, June 2022, DOI: 10.1504/IJPLM.2022.123563.

EMC Oxidation Under High-Temperature Aging, A. Inamdar, P. Gromala, A. Prisacaru, A. Kabakchiev, Y. Yang and B.Han, Reliability of Organic Compounds in Microelectronics and Optoelectronics, pp. 53-80, Springer, Cham, DOI: 10.1007/978-3-030-81576-9_3

Measurement of Effective Cure Shrinkage of Epoxy-based Molding Compound by Fiber Bragg Grating Sensor using Two-stage Curing Process, Changsu Kim, Sukrut Prashant Phansalkar, Hyun-Seop Lee, and Bongtae Han, Journal of Applied Polymer Science, Vol. 139, Issue 6, 2022, 51620, DOI: 10.1002/app.51620

Effect of Critical Properties of Epoxy Molding Compound on Warpage Prediction: A Critical Review, Sukrut Prashant Phansalkar, Changsu Kim and Bongtae Han, Microelectronics Reliability, Vol. 130, 2022, 114480, ISSN 0026-2714, DOI: 10.1016/j.microrel.2022.114480.

The Distribution and Detection Issues of Counterfeit Lithium-Ion Batteries, Lingxi Kong, Diganta Das and Michael Pecht, Energies Vol. 15, No. 10: 3798., May 2022 DOI: 10.3390/en15103798

Virtual Testing and Digital Twin Approaches for Response of Grain-scale Solder Interconnects to Multiaxial Loading, T. Hauck, M. Van Soestbergen, Q. Jiang, A. Deshpande, A. Bharamgonda and A. Dasgupta, 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), pp. 1-7, April 2022, DOI: 10.1109/EuroSimE54907.2022.9758900.

Durability of Copper Traces in Ball Grid Array (BGA) Assemblies under Sequential Harmonic Vibration and Temperature Cycling, I. Olatunji, A. Deshpande, M. Bascolo, A. Dasgupta, U. Becker and G. Jokai, 23rd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), pp. 1-5, April 2022, DOI: 10.1109/EuroSimE54907.2022.9758863.

A Fiber Optic Conjugate Stress Sensor for Instantaneous Tangent Modulus Detection Targeting Prognostic Health Monitoring Applications, Jonathan Kordell, Miao Yu and Abhijit Dasgupta, Smart Materials and Structures, Vol. 31, No. 7, May 2022, DOI: 10.1088/1361-665X/ac6bd2.

Online Monitoring of Oil Wear Debris Image Based on CNN, Han Wang, Hongfu Zuo, Zhenzhen Liu, Di Zhou, Hongsheng Yan, Xin Zhao and Michael Pecht, Mechanics & Industry Vol. 23, Article 9, 2022, DOI: 10.1051/meca/2022006.

Cross-Level Fusion for Rotating Machinery Fault Diagnosis Under Compound Variable Working Conditions, Sihan Wang, Dazhi Wang, Deshan Kong, Wenhui Li, Huanjie Wang, Michael Pecht, August 2022, Measurement, Vol. 199, Article 111455, ISSN 0263-2241, DOI: 10.1016/j.measurement.2022.111455.

A Review of Second-Life Lithium-Ion Batteries for Stationary Energy Storage Applications, Xiaosong Hu, Xinchen Deng, Feng Wang,  Zhongwei Deng, Xianke Lin, Remus Teodorescu and Michael G. Pecht, June 2022, Proceedings of the IEEE, Vol. 110, No. 6, pp. 735-753, DOI: 10.1109/JPROC.2022.3175614.

Implications of the Electric Vehicle Manufacturers’ Decision to Mass Adopt Lithium-Iron Phosphate Batteries, Harsha Walvekar, Hector Beltran, Shashank Sripad and Michael G. Pecht, IEEE Access, 2022, DOI: 10.1109/ACCESS.2022.3182726.

Evaluating the Manufacturing Quality of Lithium Ion Pouch Batteries, Lingxi Kong, Ryan Aalund, Mohammad Alipour, Stanislav I. Stoliarov and Michael G. Pecht, Journal of The Electrochemical Society, Vol. 169, No. 4, DOI: 10.1149/1945-7111/ac6539

Comparison between Synthetic Oil Lubricants for Reducing Fretting Degradation in Lightly Loaded Gold-Plated Contacts, Rishabh Chaudhary, Lovlesh Kaushik, Michael H. Azarian and Michael Pecht, April 2022, IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 12, No. 4, pp. 616-626, DOI: 10.1109/TCPMT.2022.3159572.

Evaluating the Manufacturing Quality of Lithium Ion Pouch Batteries, Kong Lingxi, Ryan Aalund, Mohammad Alipour, Stanislav I. Stoliarov, and Michael G. Pecht, Journal of The Electrochemical Society 169, No. 4 (2022): 040541, DOI: 10.1149/ 1945-7111/ac6539.

Detection and Isolation of Wheelset Intermittent Over-creeps for Electric Multiple Units Based on a Weighted Moving Average Technique, Yinghong Zhao, Xiao He, Donghua Zhou and Michael Pecht, April 2022, IEEE Transactions on Intelligent Transportation Systems, 23(4), pp. 3392-3405, DOI: 10.1109/TITS.2020.3036102.

Dynamic Equivalent Circuit Model to Estimate State-Of-Health Of Lithium-Ion Batteries, S. Amir, M. Gulzar, M. O. Tarar, I. H. Naqvi, N. A. Zaffar and M. Pecht, February 2022, IEEE Access, DOI: 10.1109/ACCESS.2022.3148528.

Learnable Wavelet Scattering Networks: Applications to Fault Diagnosis of Analog Circuits and Rotating Machinery, Varun Khemani, Michael Azarian and Michael Pecht, January 2022, Electronics, 11(3), 451. DOI: 10.3390/electronics11030451.

Imbalanced Bearing Fault Diagnosis under Variant Working Conditions Using Cost-sensitive Deep Domain Adaptation Network, Zhenyu Wu, Hongkui Zhang, Juchuan Guo, Yang Ji, and Michael Pecht, January 2022, Expert Systems with Applications, Vol. 193, 116459, DOI: 10.1016/j.eswa.2021.116459.

 

Published in 2021

Back to the Top

Thermal Performance of Cryogenic Micro-Pin Fin Coolers with Two-Phase Liquid Nitrogen Flows, Changsu Kim, Sukrut Prashant Phansalkar, Hyun-Seop Lee, Bongtae Han, Applied Sciences Vol. 11, no. 22: 11071, 2021, DOI: 10.3390/app112211071

Reliable Additive Manufacturing Using Transient Liquid Phase Sintering, Gilad Nave, Clifton Buxbaum, A.A. Martin, and F. Patrick McCluskey, November 2021, Proceedings of the ASME 2021 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, DOI: 10.1115/IPACK2021-73367.

Rotating Machinery Fault Detection and Diagnosis Based on Deep Domain Adaptation: A Survey, Siyu Zhang, Lei Su, Jiefei Gu, Lang Zhou and Michael Pecht, November 2021, Chinese Journal of Aeronautics. DOI: 10.1016/j.cja.2021.10.006.

The Detrimental Effects of Water on Electronic Devices, Ilknur Baylakoglu, Aleksandra Fortier, San Kyeong, Rajan Ambat, Helene Conseil-gudla, Michael H. Azarian, and Michael G. Pecht, November 2021, e-Prime - Advances in Electrical Engineering, Electronics and Energy. DOI: 10.1016/j.prime.2021.100016.

Life-Cycle Parameter Identification Method of an Electrochemical Model for Lithium-ion Battery Pack, Hanqing Yu, Junfu Li, Yukun Ji, and Michael Pecht, November 2021, Journal of Energy Storage, 103591. DOI: 10.1016/j.est.2021.103591.

Battery Stress Factor Ranking for Accelerated Degradation Test Planning Using Machine Learning, Saurabh Saxena, Darius Roman, Valentin Robu, David Flynn and Michael G. Pecht, Energies, vol. 14, no. 3, p. 723, January 2021, DOI: 10.3390/en14030723

An Investigation into the Effects of Greases on Low-Load Gold-Plated Electrical Contacts Undergoing Fretting, Rishabh Chaudhary, Michael H. Azarian, Michael G. Pecht, Chee-Leong Teh, Jason-Cg Tan and Julie Silk, Proceedings of the SMTA International Conference, November 1-15, 2021, Minneapolis, Minnesota, USA.   

Criteria for Solder Alloy Adoption, Deng Yun Chen, Michael Osterman, Carol Handwerker and Sa’d Hamasha, Proceedings of the SMTA International Conference, November 1-15, 2021, Minneapolis, Minnesota, USA.   

Assessment of Long-Term Storage of Electronic Components, Suraj Ravimanalan, Diganta Das and Robert Kinyanjui, Proceedings of the SMTA International Conference, November 1-15, 2021, Minneapolis, Minnesota, USA.   

Data Driven Analysis of Lithium-ion Battery Internal Resistance Towards Reliable State of Health Prediction, Michael Pecht, Sasu Tarkoma, Junehwa Song, Samu Varjonen, Arjun Kumar, Mohammad A. Hoque, and Petteri Nurmi, November 2021,  Journal Of Power Sources, 513, 230519. DOI: 10.1016/j.jpowsour.2021.230519.

Decoupling the Thermal and Non-thermal Effects of Discharge C-rate on the Capacity Fade of Lithium-ion Batteries, B. Xu, W. Diao, G. Wen, S. Choe, J. Kim and M. Pecht, October 2021,  Journal Of Power Sources, 510, 230390. DOI: 10.1016/j.jpowsour.2021.230390.

Mitigation Strategies for Li-Ion Battery Thermal Runaway: A Review, B. Xu, J. Lee, D. Kwon, L. Kong, and M. Pecht, October 2021, Renewable and Sustainable Energy Reviews, Vol. 150, p. 111437, 2021, DOI: 10.1016/j.rser.2021.111437.

Measurement of Effective Cure Shrinkage of Epoxy Molding Compound by FBG Sensor Using Two-Stage Curing, Changsu Kim, Hyun-Seop Lee, Bongtae Han and Sukrut Prashant Phansalkar, September 2021,  Journal Of Applied Polymer Science, 51620. DOI: 10.1002/app.51620.

Considerations of Aerosol-jet Printing for the Fabrication of Printed Hybrid Electronic Circuits, D.R. Hines, Y. Gu, A.A. Martin, P. Li, J. Fleischer, A. Clough-Paez, G. Stackhouse and S. Das, September 2021, Additive Manufacturing, 47, 102325. DOI: 10.1016/j.addma.2021.102325.

Hybrid Remaining Useful Life Prediction Method. A Case Study on Railway D-Cables, Y. Zang, W. Shangguan, B. Cai, H. Wang and M. G. Pecht, September 2021, Reliability Engineering & System Safety, Vol. 213, p. 107746, 2021, DOI: 10.1016/j.ress.2021.107746.

The Significance of Aqueous Binders in Lithium-Ion Batteries  Renewable and Sustainable Energy Reviews, Vol. 147, p. 111227, DOI: 10.1016/j.rser.2021.111227..

Recent Development of Unpowered Exoskeletons for Lower Extremity: A Survey, Michael Pecht, Bin Zhang, Tao Liu, and Bin Zhang, September 2021, IEEE Access, 1-1. DOI: 10.1109/access.2021.3115956.

Development of an Informative Lithium-ion Battery Datasheet, W. Diao,  C. Kulkarni, and M. Pecht, September 2021, Energies, 14(17), 5434. DOI: 10.3390/en14175434.

Machine Learning based Meta-Models for Sensorless Thermal Load Prediction, Daniel Riegel, Przemyslaw Jakub Gromala, Sven Rzepka and Bongtae Han, August 2021, 2021 20th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm). DOI: 10.1109/itherm51669.2021.9503263.

Resistive and Capacitive Strain Sensors Based on Customized Compliant Electrode: Comparison and Their Wearable Applications, T. Dong, Y. Gu, T. Liu and M. G. Pecht,  Sensors and Actuators A: Physical, Vol. 326, p. 112720, August 2021, DOI: 10.1109/ACCESS.2021.3050474.

Implementation and Performance Evaluation of a Bivariate Cut-HDMR Metamodel for Semiconductor Packaging Design Problems with a Large Number of Input Variables, CYu-Hsiang Yang, Hsiu-Ping Wei, Bongtae Han and Chao Hu, July 2021,  Materials, 14(16), 4619. DOI: 10.3390/ma14164619.

Predictive Mechanistic Model of Creep Response of Single-Layered Pressure-Sensitive Adhesive (PSA) Joints, Hao Huangn, Narendra Singh and Abhijit Dasgupta, July 2021, Materials, 14(14), 3815. DOI: 10.3390/ma14143815.

The Effect of Low Temperature Conditions on Vibration Durability of SAC105 Interconnects, K. Meier, M. Ochmann, D. Leslie, A. Dasgupta, and K. Bock, July 2021, Microelectronics Reliability, Volume 122, 2021, 114160, ISSN 0026-2714, DOI: 10.1016/j.microrel.2021.114160.

Vulnerability of Copper Pad in BGA Solder Interconnects Under Temperature Cycling, Mohamed Loukia, Abhishek Deshpande and Abhijit Dasgupta, June 2021, 2021 20th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (iTherm), 2021, pp. 679-683, DOI: 10.1109/ITherm51669.2021.9503160.

Improved Damage Modeling for Solder Joints under Combined Vibration and Temperature Cycling Loading, Robert Höhne, Karsten Meier, Abhijit Dasgupta, David Leslie and Karl-Heinz Bock, July 2021, 2021 IEEE 71st Electronic Components and Technology Conference (ECTC), 2021, pp. 1353-1358, DOI: 10.1109/ECTC32696.2021.00218.

Pricing Bundled Renewable Energy Credits using a Modified LCOE for Power Purchase Agreements, M. Bruck and P. Sandborn, June 2021, Renewable Energy, Vol. 170, pp. 224-235, 2021, DOI: 10.1016/j.renene.2021.01.127.

A Mathematical Method for Open-Circuit Potential Curve Acquisition for Lithium-Ion Batteries, J. Li, M. Zhao, C. Dai, Z. Wang and M. Pecht, June 2021, Journal of Electroanalytical Chemistry, p. 115488, 2021. DOI: 10.1016/j.jelechem.2021.115488.

Understanding the Non-Collision Related Battery Safety Risks in Electric Vehicles a Case Study in Electric Vehicle Recalls and the LG Chem Battery, R. Aalund, W. Diao, L. Kong, and M. Pecht, June 2021, IEEE Access, Vol. 9, pp. 89527-89532, 2021, DOI: 10.1109/ACCESS.2021.3090304.

Nonparametric Model-based Online Junction Temperature and State-of-Health Estimation for Insulated Gate Bipolar Transistors, X. Liu, T. Jiao, D. Das, I. H. Naqvi, and M. G. Pecht, June 2021, IEEE Access, pp, 1-1, 2021, DOI: 10.1109/ACCESS.2021.3078028.

High Temperature Aging of Epoxy-based Molding Compound and Its Effect on Mechanical Behavior of Molded Electronic Package, A. Inamdar, Y.-H. Yang, A. Prisacaru, P. Gromala, and B. Han, June 2021, Polymer Degradation and Stability, Vol. 188, p. 109572, 2021. DOI: 10.1016/j.polymdegradstab.2021.109572.

Semi-empirical Law for Fatigue Resistance of Redistribution Layers in Chip-scale Packages, M.van Soestbergen 1, Q. Jiang, J.J.M. Zaal, R. Roucou and A. Dasgupta, May 2021, Microelectronics Reliability, 120, 114096. DOI: 10.1016/j.microrel.2021.114096.

Anisotropic Steady-State Creep Behavior of Single-Crystal β-Sn: A Continuum Constitutive Model Based on Crystal Viscoplasticity, Q. Jiang and A. Dasgupta, International Journal of Plasticity Volume 140, May 2021, 102975 DOI: 10.1016/j.ijplas.2021.102975.

Machine Learning Pipeline for Battery State-of-Health Estimation, D. Roman, S. Saxena, V. Robu, M. G. Pecht and D. Flynn, April 2021, Nature Machine Intelligence, vol. 3, no. 5, pp. 447-456, 2021, DOI: 10.1038/s42256-021-00312-3.

Variability of Mechanical Cycling Durability of SAC305 Solder Joints: Model-Based Assessment Using Grain-scale Modeling of Cyclic Shear Loading, A. Deshpande, Q. Jiang, and A. Dasgupta, April 2021, 2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), 2021, pp. 1-4, DOI: 10.1109/EuroSimE52062.2021.9410828.

Effects of Anisotropic Viscoplasticity on SAC305 Solder Joint Deformation: Grain-scale Modeling of Temperature Cycling, Q. Jiang, A. Deshpande, and A. Dasgupta, April 2021, 2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), 2021, pp. 1-4, DOI: 10.1109/EuroSimE52062.2021.9410845.

Condition Monitoring of a Worm-Type Gearbox in Terms of Tribo-Prognostics Through Vibro-Thermal Analysis, S.S. Erol and M. G. Pecht, Proceedings of The Romanian Academy, Vol. 22, no. 1/2021, pp. 83-90, April 2021.

Protection Devices in Commercial 18650 Lithium-Ion Batteries, B. Xu, L. Kong, G. Wen and M. G. Pecht, IEEE Access, vol. 9, pp. 66687-66695, April 2021, DOI: 10.1109/ACCESS.2021.3075972.

Reliability Modeling for Multistage Systems Subject to Competing Failure Processes, H. Lyu, Z. Yang, S. Wang, Y. Zhao and M. Pecht, Quality and Reliability Engineering International, April 2021, DOI: 10.1002/qre.2898.

Degradation Estimation and Prediction of Electronic Packages using Data Driven Approach, A. Prisacaru, E. M. Oquelis, P. Gromala, B. Han, G. Q. Zhang, March 2021, IEEE Transactions on Industrial Electronics, pp. 1-1, 2021. DOI: 10.1109/tie.2021.3068681.

Copper Trace Fatigue Life Modeling for Rigid Electronic Assemblies, S. Menon, D. Y. Chen, M. Osterman and M. G. Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 21, no. 1, pp. 79-86, March 2021, DOI: 10.1109/TDMR.2021.3055432.

Ultrathin and Ultrasensitive Printed Carbon Nanotube-Based Temperature Sensors Capable of Repeated Uses on Surfaces of Widely Varying Curvatures and Wettabilities, B. Zhao, V. S. Sivasankar, A. Dasgupta, and S. Das, February 2021, 2ACS Applied Materials and Interfaces 2021 13 (8), 10257-10270 DOI: 10.1021/acsami.0c18095.

Thermal and Optical Performance of Cryogenically-Cooled Laser Diode Bars Mounted on Pin Finned Microcoolers, K. J. Kim, B. Han, and A. Bar-Cohen, February 2021, Applied Physics B, 127, 43, 2021, DOI: 10.1007/s00340-021-07590-0.

Reliability Analysis for the Dependent Competing Failure With Wear Model and its Application to the Turbine and Worm System, H. Lyu, X. Zhang, Z. Yang, S. Wang, C. Li and M. G. Pecht, IEEE Access, Vol. 9, pp. 50265-50280, February 2021, DOI: 10.1109/ACCESS.2021.3062026.

Lithium‑iron-phosphate Battery Electrochemical Modelling Under a Wide Range of Ambient Temperatures, Y. Wang, J. Li, J. Zhang and M. G. Pecht, Journal of Electroanalytical Chemistry, Vol. 882, p. 115041, February 2021, DOI: 10.1016/j.jelechem.2021.115041.

Role of the Rest Period in Capacity Fade of Graphite/LiCoO₂ Batteries, S. Saxena, Y. Ning, R. Thompson and M. G. Pecht, Journal of Power Sources, Vol. 484, p. 229246, February 2021, DOI: 10.1016/j.jpowsour.2020.229246.

Charging Induced Electrode Layer Fracturing of 18650 Lithium-ion Batteries, W. Diao, B. Xu and M. G. Pecht, Journal of Power Sources, vol. 484, p. 229260, February 2021, DOI: 10.1016/j.jpowsour.2020.229260.

Detection of Intermittent Faults Based on an Optimally Weighted Moving Average T² Control Chart with Stationary Observations, Y. Zhao, X. He, J. Zhang, H. Ji, D. Zhou and M. G. Pecht, Automatica, Vol. 123, p. 109298, January 2021, DOI: 10.1016/j.automatica.2020.109298.

Joint Estimation of Inconsistency and State of Health for Series Battery Packs, Y. Che, A. Foley, M. El-Gindy, X. Lin, X. Hu and M. G. Pecht, Automotive Innovation, January 2021, DOI: 10.1007/s42154-020-00128-8.

An Assessment of Validity of the Bathtub Model Hazard Rate Trends in Electronics, Aishwarya Gaonkar, Rajkumar B. Patil, San Kyeong, Diganta Das and Michael G Pecht, IEEE Access, Vol. 9, pp. 10282-10290, January 2021, DOI: 10.1109/ACCESS.2021.3050474.

A Machine Learning Degradation Model for Electrochemical Capacitors Operated at High Temperature, Darius Roman, Saurabh Saxena, Jens Bruns, Robu Valentin, Michael Pecht and David Flynn, IEEE Access, Vol. 9, pp. 25544 - 25553, February 2021, DOI: 10.1109/ACCESS.2021.3057959.

Effects of External Pressure on Phase Stability and Diffusion Rate in Lithium-Ion Cells, N. Williard, C. Hendricks, J. Chung and M. Pecht, Journal of Electroanalytical Chemistry, p. 115400, August 2021, DOI: 10.1016/j.jelechem.2021.115400.

Circular Economy of Li Batteries: Technologies and Trends, H. Ali, H. A. Khan and M. G. Pecht, August 2021, Journal of Energy Storage, Vol. 40, p. 102690, DOI: 10.1016/j.est.2021.102690.

Understanding Mixed Flowing Gas Tests: Copper versus Silver, M.Osterman and R. Utter, April 2021, Journal of Electronic Materials, 1-10 (2021). DOI: 10.1007/s11664-021-08883-y.

Is Our Silver Corrosion Measurement Correct? Research Note, M.Osterman and R. Utter, January 2021, Journal of Electronic Materials, 50, 939-940 (2021). DOI: 10.1007/s11664-020-08640-7 .

 

Published in 2020

Back to the Top

Understanding and Predicting the Risks in Li-ion Batteries, Lingxi Kong and Michael G. Pecht, Proceedings IRF2020: 7th International Conference Integrity-Reliability-Failure, pp. 587–588, September 2020.

Artificial Intelligence-Related Research Funding by the U.S. National Science Foundation and the National Natural Science Foundation of China, Hamidreza Habibollahi Najaf Abadi, Zhou He, and Michael G. Pecht, IEEE Access, vol. 8, pp. 183448-183459, 2020, DOI: 10.1109/ACCESS.2020.3029231.

Visual Inspection of Steel Surface Defects Based on Domain Adaptation and Adaptive Convolutional Neural Network, Siyu Zhang, Qiuju Zhang, Jiefei Gu, Lei Su, Ke Li and Michael G. Pecht, Mechanical Systems and Signal Processing, 153, p.107541, December 2020, DOI: 10.1016/j.ymssp.2020.107541.

Early detection of anomalous degradation behavior in lithium-ion batteries, Weiping Diao, Ijaz Haider Naqvi and Michael G. Pecht, Journal of Energy Storage, vol. 32, p. 101710, December 2020, DOI: 10.1016/j.est.2020.101710.

Weighted Entropy Minimization Based Deep Conditional Adversarial Diagnosis Approach Under Variable Working Conditions, Michael Pecht, Minping Jia, and Daoming She, November 2020, IEEE/ASME Transactions on Mechatronics, 26(5), pp.2440-2450, DOI: 10.1109/TMECH.2020.3040175.

Hybrid Electrochemical Energy Storage Systems: An Overview for Smart Grid and Electrified Vehicle Applications, Lei Zhang, Xiaosong Hu, Zhenpo Wang, Jiageng Ruan, Chengbin Ma, Ziyou Song, David G. Dorrell and Michael G. Pecht; IEEE Transactions on Industrial Electronics, vol. 68, no. 3, pp. 2659-2666, November 2020, DOI: 10.1109/TIE.2020.2972468

Advanced Battery Management Strategies for a Sustainable Energy Future: Multilayer Design Concepts and Research Trends, Haifeng Dai, Bo Jiang, Xiaosong Hu, Xianke Lin, Xuezhe Wei and Michael Pecht; Renewable and Sustainable Energy Reviews, p. 110480, October 2020, DOI: 10.1016/j.rser.2020.110480

Aging Modes Analysis and Physical Parameter Identification Based on a Simplified Electrochemical Model for Lithium-ion Batteries, Junfu Li, Dafang Wang, Lei Deng, Zhiquan Cui, Chao Lyu, Lixin Wang and Michael G. Pecht, Journal of Energy Storage, vol. 31, p. 101538, October 2020, DOI: 10.1016/j.est.2020.101538.

Sparse Reconstruction for Micro-defect Detection of Two-dimensional Ultrasound Image Based on Blind Estimation, Lei Su, Xiaonan Yu, Ke Li, Jiefei Gu and Michael G. Pecht, IEEE Transactions on Industrial Electronics, pp. 1–1, September 2020, DOI: 10.1109/TIE.2020.3021651.

A Deep Forest Based Fault Diagnosis Scheme for Electronics-Rich Analog Circuit Systems, Zhen Jia, Zhenbao Liu, Yanfen Gan, Chi Man Vong and Michael G. Pecht, IEEE Transactions on Industrial Electronics, pp. 1–1, September 2020, DOI: 10.1109/TIE.2020.3020252.

Translation Invariance-Based Deep Learning for Rotating Machinery Diagnosis, Wenliao Du, Shuangyuan Wang, Xiaoyun Gong, Hongchao Wang, Xingyan Yao and Michael Pecht, Shock and Vibration, vol. 2020, August 2020, DOI: 10.1155/2020/1635621.

X-ray Based Non-destructive Method for Alkaline Coin Cell Quality Assurance, Saurabh Saxena and Michael Pecht, Journal of Energy Storage, Vol. 30, August 2020, DOI: 10.1016/j.est.2020.101476.

Sparse Auto-Encoder with Regularization Method for Health Indicator Construction and Remaining Useful Life Prediction of Rolling Bearing, Daoming She, Minping Jia, and Michael G. Pecht, Measurement Science and Technology, vol. 31, no. 10, p. 105005, July 2020, DOI: 10.1088/1361-6501/ab8c0f.

Reliability Analysis of Multilayer Polymer Aluminum Electrolytic Capacitors, Jose Romero, Michael H. Azarian and Michael G. Pecht, Microelectronics Reliability, Vol. 112, July 2020, DOI: 10.1016/j.microrel.2020.113725.

In-Situ Service Load Monitoring of Automotive Electronic Systems Using Silicon-Based Piezoresistive Stress Sensor, Y.-H. Yang, B. Han, A. Prisacaru, P. Gromala, S. Jiang, and A. Sarwar, , Microelectronics Reliability, Vol. 110, July 2020, DOI: 10.1016/j.microrel.2020.113650.

Assembly Options and Challenges for Electronic Products With Lead-Free Exemption, Chien-Ming Huang, Anto Raj, Michael Osterman, and Michael Pecht, IEEE Access, vol. 8, pp. 134194-134208, July 2020, DOI: 10.1109/ACCESS.2020.3010771.

A Multi-Objective Design Optimization Framework for Wind Turbines Under Altitude Consideration, Mohamed Arezki Mellal and Michael Pecht ; Energy Conversion and Management, Vol. 222, July 2020, DOI: 10.1016/j.enconman.2020.113212.

Detection and Detectability of Intermittent Faults Based on Moving Average T² Control Charts with Multiple Window Lengths, Yinghong Zhao, Xiao He, Michael G. Pecht, Junfeng Zhang, and Donghua Zhou.  Journal of Process Control Vol. 92, Pages 296-309, July 2020, DOI: 10.1016/j.jprocont.2020.07.002.

Degradation Monitoring of Insulation Systems Used in Low-Voltage Electromagnetic Coils under Thermal Loading Conditions from a Creep Point of View, Kai Wang, Haifeng Guo, Aidong Xu and Michael G. Pecht,  Sensors 2020, Vol. 20, Issue 13, July 2020, DOI: 10.3390/s20133696.

Deep Residual Shrinkage Networks for Fault Diagnosis, Minghang Zhao, Shisheng Zhong, Xuyun Fu, Baoping Tang, and Michael Pecht; IEEE Transactions on Industrial Informatics, Vol. 16, Issue 7, July 2020, DOI: 10.1109/TII.2019.2943898.

Defect Inspection of Flip Chip Solder Joints Based on Non-destructive Methods: A Review, Lei Su, Xiaonan Yu, Ke Li, and Michael G. Pecht, Microelectronics Reliability, Vol. 110, July 2020, DOI: 10.1016/j.microrel.2020.113657.

Board-Level Lifetime Prediction for Power Board of Balise Transmission Module in High-Speed Railways, Wei Shangguan, Yu Zang, Huashen Wang and Michael G. Pecht, IEEE Access, vol. 8, pp. 135011–135024, July 2020, DOI: 10.1109/ACCESS.2020.3011107.

Wasserstein Distance Based Deep Multi-Feature Adversarial Transfer Diagnosis Approach Under Variable Working Conditions, Daoming She, N. Peng, Minping Jia, and Michael G. Pecht; Journal of Instrumentation, vol. 15, no. 06, pp. P06002-P06002, June 2020, DOI:10.1088/1748-0221/15/06/P06002.

Intelligent Fault Diagnosis Using an Unsupervised Sparse Feature Learning Method, Chun Cheng, Weiping Wang, Haining Liu and Michael G. Pecht; Measurement Science and Technology, vol. 31, no. 9, pp. 95903–95913, June 2020, DOI:10.1088/1361-6501/ab8c0e.

An Analytical Model for the CC-CV Charge of Li-ion Batteries with Application to Degradation Analysis, Haining Liu, Ijaz Haider Naqvi, Fajia Li, Chengliang Liu, Neda Shafiei, Yulong Li, and Michael Pecht; Journal of Energy Storage, Vol. 29, June 2020, DOI:10.1016/j.est.2020.101342.

Detection and Isolation of Wheelset Intermittent Over-creeps for Electric Multiple Units Based on a Weighted Moving Average Technique, Yinghong Zhao, Xiao He, Donghua Zhou and Michael Pecht, IEEE Transactions on Intelligent Transportation Systems, pp. 1-14, May 2020, DOI: 10.1109/TITS.2020.3036102.

Volumetric Effective Cure Shrinkage Measurement of Dual Curable Adhesives by Fiber Bragg Grating Sensor, S. Phansalkar, C. Kim, B. Han and P. Gromala, Journal of Materials Science, 55(22), 9655-9664, May 2020, DOI:10.1007/s10853-020-04716-1.

Reliability of Cylindrical Li-ion Battery Safety Vents, Xing-Yan Yao, Lingxi Kong, and Michael Pecht, IEEE Access, May 2020, DOI: 10.1007/s10694-020-00996-w.

Moisture Transport through Fiber-Reinforced Composite Materials Enclosing Critical Automotive Electronics Composites, A. Roman, B. Wu, B. Han, G. M. Reinacher, and S. G. Yousef, IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 10, no. 9, pp. 541-550, April 2020, DOI: 10.1109/TCPMT.2020.2977111.

Multi-Objective Optimization Design of a Notch Filter Based on Improved NSGA-II for Conducted Emissions, Lu Zhang, Hongjuan Ge, Ying Ma, Jianliang Xue, Huang Li, and Michael Pecht, IEEE Access, April 2020, DOI: 10.1109/ACCESS.2020.2991576.

Artificial Intelligence Trends Based on the Patents Granted by the United States Patent and Trademark Office, Hamidreza Habibollahi Najaf Abadi and Michael Pecht, IEEE Access, April 2020, DOI: 10.1109/ACCESS.2020.2988815.

Evaluation of Li-based Battery Current, Voltage, and Temperature Profiles for In-service Mobile Phones, Hayder Ali, Hassan Khan, and Michael Pecht; IEEE Access, April 2020, DOI: 10.1109/ACCESS.2020.2988728.

Energy Based Modeling for Temperature Cycling Induced Tin Silver Copper Solder Interconnect Fatigue Life, Deng Yun Chen, Michael Osterman, and Abhijit Dasgupta; Microelectronics Reliability, April 2020, DOI: 10.1016/j.microrel.2020.113651.

Development of a Cycle Counting Algorithm with Temporal Parameters, James M. Twomey, Deng Y. Chen, Michael D. Osterman, and Michael G. Pecht; Microelectronics Reliability, April 2020, DOI:10.1016/j.microrel.2020.113652.

Stacking Yield Prediction of Package-on-Package Assembly Using Advanced Uncertainty Propagation Analysis: Part II Implementation of Stochastic Model, H.-P. Wei, Y.-H. Yang, and B. Han, Journal of Electronic Packaging, 142(1): 011002, March 2020, DOI: 10.1115/1.4044218

Stacking Yield Prediction of Package-on-Package Assembly Using Advanced Uncertainty Propagation Analysis: Part I Stochastic Model Development,H.-P. Wei, Y.-H. Yang, and B. Han, Journal of Electronic Packaging, 142(1): 011001, March 2020, DOI: 10.1115/1.4043704.

Online Degradation State Assessment Methodology for Multi-mode Failures of Insulated Gate Bipolar Transistor, Xiangxiang Liu, Lingling Li, Diganta Das, Ijaz Haider Naqvi, and Michael Pecht; IEEE Access, March 2020, DOI:10.1109/ACCESS.2020.2984385.

Battery Health Estimation for IoT Devices using V-Edge Dynamics, Arjun Kumar, Mohammad A. Hoque, Petteri Nurmi, Michael G. Pecht, Sasu Tarkoma and Junehwa Song; HotMobile 2020 - Proceedings of the 21st International Workshop on Mobile Computing Systems and Applications, March 2020, DOI:10.1145/3376897.3377858.

Data-Driven Reliability Analysis of Boeing 787 Dreamliner, Guru Pandian, Michael Pecht, Enrico Zio, and Melinda Hodkiewicz; Chinese Journal of Aeronautics, March 2020, DOI:10.1016/j.cja.2020.02.003.

Maximizing the Returns of LIDAR Systems in Wind Farms for Yaw Error Correction Applications, Roozbeh Bakhshi and Peter Sandborn, Wind Energy. 2020;1–14, February 2020, DOI: 10.1002/we.2493.

Battery Lifetime Prognostics, Xiaosong Hu, Le Xu, Xianke Lin, and Michael Pecht; Joule, Vol. 4, February 2020, DOI:10.1109/TIE.2020.2972458.

Deep Residual Networks with Adaptively Parametric Rectifier Linear Units for Fault Diagnosis, Minghang Zhao, Shisheng Zhong, Xuyun Fu, Baoping Tang, Shaojiang Dong, and Michael G. Pecht; IEEE Transactions on Industrial Electronics, February 2020, DOI:10.1016/j.joule.2019.11.018.

Capacity-fading Behavior Analysis for Early Detection of Unhealthy Li-ion Batteries, Changyong Lee, Sugyeong Jo, Daeil Kwon, and Michael Pecht; IEEE Transactions on Industrial Electronics, February 2020, DOI:10.1109/TIE.2020.2972468.

Multiple Wavelet Regularized Deep Residual Networks for Fault Diagnosis, Minghang Zhao, Baoping Tang, Lei Deng, and Michael Pecht, Measurement, Vol. 152, February 2020, DOI: 10.1016/j.measurement.2019.107331.

Copper Dissolution in Overdischarged Lithium-ion Cells: X-ray Photoelectron Spectroscopy and X-ray Absorption Fine Structure Analysis, Christopher Hendricks, Azzam Mansour, Daphne Fuentevilla, Gordon Waller, Jonathan Ko, and Michael Pecht; Journal of The Electrochemical Society, Vol. 167, February 2020, DOI:10.1149/1945-7111/ab697a.

Correction to "Progressive Improved Convolutional Neural Network for Avionics Fault Diagnosis", Shuwen Chen, Honjuan Ge, Jing Li, & Michael Pecht; IEEE Access, Vol. 7, February 2020, DOI:10.1109/ACCESS.2020.2968992.

Two‑level Fault Diagnosis RBF Networks for Auto‑transformer Rectifier Units Using Multi‑source Features, Yi Lin, Hongjuan Ge, Shuwen Chen and Michael G. Pecht, Journal of Power Electron., vol. 20, no. 3, pp. 754–763, February 2020, DOI:10.1007/s43236-020-00057-z.

Analysis of Specified Capacity in Power Banks, Weiping Diao, Saurabh Saxena and Michael G. Pecht, IEEE Access, Jan. 2020, vol. 8, pp. 21326–21332, January 2020, DOI:10.1109/ACCESS.2020.2969410.

3D Printed Microdroplet Curing: Unravelling the Physics of On-Spot Photopolymerization, Vishal Sankar Sivasankar, Harnoor Singh Sachar, Shayandev Sinha, Daniel R. Hines, and Siddhartha Das, ACS Applied Polymer Materials, pp 966-976, January 2020, DOI: 10.1021/acsapm.9b01181.

Low Temperature Vibration Reliability of Lead-free Solder Joints, Karsten Meier, Maximilian Ochmann, Karlheinz Bockand, David Leslie, and Abhijit Dasgupta, 2020 IEEE 70th Electronic Components and Technology Conference (ECTC), Orlando, FL, USA, 2020, pp. 801-806, DOI: 10.1109/ECTC32862.2020.00130.

Optimizing the Use of LIDAR in Wind Farms: Minimizing Life-Cycle Cost Impact of Yaw Error, Roozbeh Bakhshi and Peter Sandborn, Journal of Physics: Conference Series, 1452, 012011. DOI: 10.1088/1742-6596/1452/1/012011.

Computed Tomography Analysis of Li-Ion Battery Case Ruptures, L. Kong, X. Hu, G. Gui, Y. Su, and M. Pecht, Fire Technology, 56(6), 2565-2578. DOI: 10.1007/s10694-020-00996-w.

Experimental Verification of Lithium-ion Battery Prognostics Based on an Interacting Multiple Model Particle Filter, S. Wang, W. Han, L. Chen, X. Zhang and M. Pecht, Transactions of the Institute of Measurement And Control, 014233122096157. DOI: 10.1177/0142331220961576.

Commercial Hard Drive Failures in a Data Center Application and the Role of SMART Attribute Information, Michael Pecht and Edmond Elburn, Circuit World, September 2020, DOI: 10.1108/CW-07-2020-0127.

Improved Electromagnetic Coil Insulation Health Monitoring Using Equivalent Circuit Model Analysis, N. Jordan Jameson, Michael H. Azarian, and Michael Pecht, International Journal of Electrical Power & Energy Systems, Vol.119, pp 1-8, July 2020, DOI: 10.1016/j.ijepes.2020.105829.

 

Published in 2019

Back to the Top

Surface Degradation of Strontium-based Perovskite Electrodes of Solid Oxide Fuel Cells, Nripendra K. Patel, Robert G. Utter, Diganta Das and Michael Pecht, August 2019, Journal of Power Sources, Volume 438, 2019, 227040, ISSN 0378-7753, DOI: 10.1016/j.jpowsour.2019.227040.

Analysis of Flip-Chip Solder Joints under Isothermal Vibration Loading, K. Meier, D. Leslie, A. Dasgupta, M. Roellig, and K. Bock, 2019 IEEE 21st Electronics Packaging Technology Conference (EPTC), 2019, pp. 138-142, DOI: 10.1109/EPTC47984.2019.9026642.

Measuring Airflow through the Portable High-efficiency Air Filtration (Pheaf) Device to Assess Reliability of Instrument and Sample Location, Derek A. Newcomer, Peter LaPuma, Robert Brandys, Amanda Northcross and Abhijit Dasgupta, Journal of the Air & Waste Management Association, 69(6), 734-742. DOI: 10.1080/10962247.2019.1576554.

Fatigue Behaviour of Lead-free Solder Joints under Combined Thermal and Vibration Loads, Karsten Meier, Maria Winkler, David Leslie, Karlheinz Bock and Abhijit Dasgupta, 2019 IEEE 69th Electronic Components and Technology Conference (ECTC), 2019, pp. 498-504, doi: 10.1109/ECTC.2019.00082.

Fiber Optic Conjugate-Stress Sensor for Local Stiffness Changes under Quasistatic Loads, Jonathan Kordell, Miao Yu and Abhijit Dasgupta, 2019 18th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2019, pp. 830-834, doi: 10.1109/ITHERM.2019.8757346.

Uniaxial Creep Response of Double-Layered Pressure Sensitive Adhesive (PSA), Jonathan Kordell, Miao Yu and Abhijit Dasgupta, 2019 18th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2019, pp. 290-294, doi: 10.1109/ITHERM.2019.8757417.

Harmonic Vibration Durability Tests on Lead-Free Solder Joints at Different Isothermal Conditions, Karsten Meier, David Leslie, Tamara Storz, Karlheinz Bock and Abhijit Dasgupta, 2019 20th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), 2019, pp. 1-5, doi: 10.1109/EuroSimE.2019.8724529.

Effect of Nonlinear Interactions of Electronic Assemblies in Response to Multiaxial Vibration ,Karsten Meier, David Leslie, Tamara Storz, Karlheinz Bock and Abhijit Dasgupta , 2019 20th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), 2019, pp. 1-4, doi: 10.1109/EuroSimE.2019.8724508.

An Electro-thermal Parametric Degradation Model of Insulated Gate Bipolar Transistor Modules, Xiangxiang Liu, Lingling Li, Diganta Das, Michael Pecht; Microelectronics Reliability, Volume 104, 2020, 113559, ISSN 0026-2714, December 2019, DOI:10.1016/j.microrel.2019.113559.

Shape-Driven Arrest of Coffee Stain Effect Drives the Fabrication of Carbon-Nanotube-Graphene-Oxide Inks for Printing Embedded Structures and Temperature Sensors, Beihan Zhao, Yanbin Wang, Shayandev Sinha, Chaoji Chen, Dapeng Liu, Abhijit Dasgupta, Liangbing Hu, and Siddhartha Das; Nanoscale, Issue 48, December 2019, DOI:10.1039/C9NR08450A.

Progressive Improved Convolutional Neural Network for Avionics Fault Diagnosis, Shuwen Chen, Honjuan Ge, Jing Li, & Michael Pecht; IEEE Access, Vol. 7, November 2019, DOI:10.1109/ACCESS.2019.2954170.

On the Accuracy of CMOS-based Piezoresistive Stress Sensor: Theoretical Review and Experimental Validation, A. Prisacaru, A. Palczynska, P. Gromala, B. Wu, B. Han, and G. Q. Zhang, IEEE Sensors Journal, vol. 19, no. 20, pp. 9139-9148, Oct. 2019, DOI:10.1109/JSEN.2019.2921406.

Fretting Performance Comparison between PFPE and PAO Based Lubricants for Lightly-Loaded Gold-Plated Electrical Contacts, Lovlesh Kaushik, Michael H. Azarian, & Michael Pecht; 2019 IEEE Holm Conference on Electrical Contacts,, September 2019, DOI:10.1109/HOLM.2019.8923785.

Direct-Write Printed Broadband Inductors, Yuan Gu, Donghun Park, Stephen Gonya, Joseph Jendrisak, Siddhartha Das, and Daniel R. Hines; Additive Manufacturing, Vol. 30, September 2019, DOI:10.1016/j.addma.2019.100843.

A Framework to Interpret Deep Learning-Based Health Management System with Human Interactions, Namkyoung Lee, Michael H. Azarian, & Michael Pecht; Proceedings of the Annual Conference of the PHM Society,, September 2019, DOI:10.36001/phmconf.2019.v11i1.914.

Remaining Useful Life Estimation of Lithium-ion Cells Based on k-nearest Neighbor Regression with Differential Evolution Optimization, Yapeng Zhou, Miaohua Huang, & Michael Pecht; Journal of Cleaner Production, PP 1-12, November 2019, DOI:10.1016/j.jclepro.2019.119409.

Online Capacity Estimation for Lithium-ion Batteries through Joint Estimation Method, Quanqing Yu, Rui Xiong, Ruixin Yang, & Michael Pecht; Applied Energy, Vol. 255, PP 1-8, December 2019, DOI:10.1016/j.apenergy.2019.113817.

A Compliant Electrode Developed by Plasticized Polyvinyl Chloride Filled with Multi-Walled Carbon Nanotubes for Sensing and Actuating Tianyun Dong, Tao Liu & Michael Pecht; Sensors and Actuators, Vol. 296, PP 383-391, September 2019, DOI:10.1016/j.sna.2019.07.042.

ACA Curing Process Optimization Based on Curing Degree Considering Shear Strength of Joints , Guanghua Wu, Diganta Das & Michael Pecht; IEEE Access, Early Access, PP 1-1, December 2019 , DOI:10.1109/ACCESS.2019.2959324.

Elastic Behavior of Coarse-Grained SnAgCu (SAC) Solder Joints Based on an Anisotropic Multi-scale Predictive Modeling Approach , Qian Jiang, Abhishek Deshpande & Abhijit Dasgupta; Journal of Electronic Materials, Vol. 48, PP 8076-8088, September 2019 , DOI: 10.1007/s11664-019-07576-x.

Experimental Approach to Determine Damage Curves for SnAgCu Solder Under Sequential Cyclic Loads , Elviz George, Deng Yun Chen, Michael Osterman, and Michael Pecht,  Journal of Electronics Materials, Early Access, PP 1-9, 2019, DOI: 10.1007/s11664-019-07811-5.

A Local Adaptive Minority Selection and Oversampling Method for Class-Imbalanced Fault Diagnostics in Industrial Systems,  Zhenyu Wu, Wenfang Lin, Binghao Fu, Juchuan Guo, Yang Ji, and Michael Pecht, IEEE Transactions on Reliability, Early Access, PP 1-12, 2019, DOI: 10.1109/TR.2019.2942049.

Life Model for Tantalum Electrolytic Capacitors with Conductive Polymers , Jose A. Romero, Michael H. Azarian, and Michael Pecht,  Microelectronics Reliability, Vol. 104, PP 1-8, January 2020, DOI: 10.1016/j.microrel.2019.113550.

Battery Warm-up Methodologies at Subzero Temperatures for Automotive Applications: Recent Advances and Perspectives, Xiaosong Hu, Yusheng Zheng, David A. Howey, Hector Perez, Aoife Foley and Michael Pecht,  Progress in Energy and Combustion Science, Vol. 77, PP 1-24, March 2020, DOI: 10.1016/j.pecs.2019.100806.

Cracks in the 3D-Printed Conductive Traces Of Silver Nanoparticle Ink, Neil Dalal, Yuan Gu, Daniel R Hines, Abhijit Dasgupta, and Siddhartha Das,  Journal of Micromechanics and Microengineering, Vol. 29, PP 1-15, July 2019, DOI:10.1088/1361-6439/ab2f25.

Parameter updating method of a simplified first principles-thermal coupling model for lithium-ion batteries, Junfu Lixin Wang, Chao Lyu, Dafang Wang, Michael Pecht, Applied Energy, Vol. 256, PP 1-15, December 2019, DOI: 10.1016/j.apenergy.2019.113924.

A Weighted Deep Domain Adaptation Method for Industrial Fault Prognostics according to Prior Distribution of Complex Working Conditions, Zhenyu Wu, Shuyang Yu, Xinning Zhu, Yang Ji, Michael Pecht, IEEE Access, September 23, 2019, , DOI: 10.1109/ACCESS.2019.2943076.

Published in 2018

Back to the Top

Life cycle extension of mobile phones. An exploration with focus on the end-consumer, Penners, O., Semeijn, J., Van Riel, A., and Lambrechts, W. (2018),  The Central European Review Of Economics And Management, 2(4), 7. doi: 10.29015/cerem.723

Prediction and Mitigation of Vertical Cracking in High Temperature Transient Liquid Phase Sintered Joints by Thermomechanical Simulation, H. Greve, S. A. Moeini, P. McCluskey, and S. Joshi,  Journal of Electronic Packaging, 140(2), 020903. (2018)

Novel Silver Die Attach Technology on Silver Pre-sintered DBA Substrates for High Temperature Applications, S. Nishimoto, S.A. Moeini, T. Ohashi, Y. Nagatomo, and P. McCluskey, Microelectronics Reliability, 87, pp. 232-237. (2018)  DOI: 10.1016/j.microrel.2018.06.010

Remote Computing Cluster for the Optimization of Preventive Maintenance Strategies: Models and Algorithms, A. Kirillov, S. Kirillov, V. Iakimkin, and M. Pecht, Maintenance Management, DOI: 10.5772/intechopen.81996.

Advanced Mechanical/Optical Configuration of Real-Time Moiré Interferometry for Thermal Deformation Analysis of Fan-Out Wafer Level Package, Bulong Wu, Bongate Han, IEEE Transactions on Components, Packaging and Manufacturing Technology, DOI: 10.1109/TCPMT.2018.2805873.

Electrical characterization of ALD HfO2 high-k dielectrics on ( 201) β-Ga²O³ , D. I. Shahin, Aris Christou, Marko J. Tadjer, Virginia D. Wheeler, Andrew D. Koehler, Travis J. Anderson, Charles R. Eddy, Jr. Applied Physics Letters, Lett. 112, 042107, 2018, DOI: 10.1063/1.5006276.

A parameter estimation method for a simplified electrochemical model for Li-ion batteries, Junfu Li, Lixin Wang, Chao Lyu, Enhui Liu, Yinjiao Xing, Michael Pecht, Electrochimica Acta, Vol. 275, No. 10, PP. 50-58, June. 2018, DOI:10.1016/j.electacta.2018.04.098.

A review of fractional-order techniques applied to lithium-ion batteries, lead-acid batteries, and supercapacitors, Changfu Zou, Lei Zhang , Xiaosong Hu , Zhenpo Wang , Torsten Wik , Michael Pecht, Journal of Power Sources, Volume 390, June 2018, Pages 286–296, DOI: 10.1016/j.jpowsour.2018.04.033.

An adaptive state of charge estimation approach for lithium-ion series-connected battery system, Simin Penga, Xuelai Zhu, Yinjiao Xing, Hongbing Shi, Xu Cai, Michael Pecht, Journal of Power Sources, Volume 392, June 2018, Pages 48-59, DOI: 10.1016/j.jpowsour.2018.04.101.

Deep Residual Networks With Dynamically Weighted Wavelet Coefficients for Fault Diagnosis of Planetary Gearboxes, Minghang Zhao, Baoping Tang , Myeongsu Kang, Michael Pecht, IEEE Transactions on Industrial Electronics, Volume: 65, Issue: 5, May 2018, DOI: 10.1109/TIE.2017.2762639.

In Situ Failure Detection of Electronic Control Units Using Piezoresistive Stress Sensor, Alexandru Prisacaru, Alicja Palczynska, Przemyslaw Gromala, Andreas Theissler, Bongtae Han, Guo Qi Zhang, IEEE Transactions on Components, Packaging and Manufacturing Technology, DOI: 10.1109/TCPMT.2018.2816259.

Hybrid Approach to Conduct Failure Prognostics of Automotive Electronic Control Unit Using Stress Sensor as In Situ Load Counter, Bulong Wu1, Alexandru Prisacaru, Alicja Palczynska, Przemyslaw Gromala, Bongtae Han, Dae-Suk Kim, IEEE Transactions on Components, Packaging and Manufacturing Technology, DOI: 10.1109/TCPMT.2018.2816259.

Effective decapsulation of copper wire-bonded microelectronic devices for reliability assessment, Subramani Manoharan, Chandradip Patel, Patrick McCluskey, and Michael Pecht, IEEE Transactions on Components, Packaging and Manufacturing Technology, DOI: 10.1109/TCPMT.2018.2816259

In-situ Observations of Lithium Dendrite Growth, Lingxi Kong, Yinjiao Xing, and Michael Pecht, IEEE Access, Vol. PP, Issue 99, February 21, 2018, DOI: 10.1109/ACCESS.2018.2805281. 

Exploding E-Cigarettes: A Battery Safety Issue, Saurabh Saxena, Lingxi Kong, and Michael Pecht, IEEE Access, Vol. PP, Issue 99, February 21, 2018, DOI: 10.1109/ACCESS.2018.2805281. 

Malfunctions of Medical Devices Due to Electrostatic Occurrences Big Data Analysis of 10 Years of the FDA's Reports, Mehdi Kohani and Michael Pecht, IEEE Access, Vol. 6, PP. 5805-5811, 2018, DOI: 10.1109/ACCESS.2017.2782088. 

Phthalates in Electronics: The Risks and the Alternatives, Michael G. Pecht, Ifran Ali, and Augustus Carlson, IEEE Access, Vol. 6, PP. 6232-6242, 2018, DOI: 10.1109/ACCESS.2017.2778950.

Published in 2017

Back to the Top

The Effect of Inverter Failures on the Return on Investment of Solar Photovoltaic Systems Tyler Formica, Hassan Abbas Khan, and Michael Pecht, IEEE Access, Vol. 5, September 2017, DOI: 10.1109/ACCESS.2017.2753246.

Effect of Corner Staking on the Fatigue Life of BGA Under Thermal Cycling  Deng Yun Chen and Michael Osterman, Proceedings of the ASME 2017 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, InterPACK 2017, August 29 - September 1, 2017, San Francisco, CA, USA.

Viscoplastic Properties of Pressure-less Sintered Silver Materials Using Indentation, D. Leslie, A. Dasgupta and Carlos Morillo, Microelectronics Reliability 74 (2017) 121–130

A Return on Investment Model for the Implementation of New Technologies on Wind Turbines, Roozbeh Bakhshi and Peter Sandborn, IEEE Transactions on Sustainable Energy, Vol. 9, No. 1, pp. 284-292, July, 2017.

Analysis of Wind Turbine Capacity Factor Improvement by Correcting Yaw Error Using LIDAR, Roozbeh Bakhshi and Peter Sandborn, IEEE Transactions on Industrial Electronics, Vol. 64, No. 5, pp. 3748-3757, May, 2017.

Impedance-Based Condition Monitoring for Insulation Systems Used in Low-Voltage Electromagnetic Coils, Noel Jordan Jameson, Michael H. Azarian, and Michael G. Pecht, IEEE Transactions on Industrial Electronics, Vol. 64, No. 5, pp. 3748-3757, May, 2017.

A Modified Boost Rectifier for Elimination of Circulating Current Power Factor Correction Applications, Karthikeyan Venkitusamy, Abhishek Awasthi, Sanjeevikumar Padmanaban, Rajasekar Selvamuthukumaran, and Michael G. Pecht, Microelectronics Reliability, Vol. 69, PP. 29-35, 2017, DOI: https://doi.org/10.1016/j.microrel.2016.12.015.

Signal Model-Based Fault Coding for Diagnostics and Prognostics of Analog Electronic Circuits, Zhenbao Liu, Taimin Liu, Junwei Han, Shuhui Bu, Xiaojun Tang, and Michael G. Pecht , IEEE Industrial Electronics Society, Vol. 64, Issue. 1, PP. 605-614, 2017, DOI: https://doi.org/10.1016/j.microrel.2016.12.015 .

Inkwells for on-demand deposition rate measurement in aerosol-jet based 3D printing, Yuan Gu, David Gutierrez, Siddhartha Das, and D. R. Hines, Journal of Micromechanics and Microengineering, Vol. 29, Issue 9, PP. 1.9, August 22, 2017. 

Aerosol-Jet Printed Fillets for Well-Formed Electrical Connections between Different Leveled Surfaces, Yuan Gu, Daniel R. Hines, Victor Yun, Michael Antoniak, and Siddhartha Das, Advanced Materials Technologies, Vol. 2, Issue 11, PP. 1-9, September 21, 2017. 

Measurement of Elastic Properties of Epoxy Molding Compound by Single Cylindrical Configuration with Embedded Fiber Bragg Grating Sensor, Yong Sun, Hyun-Seop Lee, Bongate Han, Experimental Mechanics, Vol: 57, Issue: 2, pp. 313-324, 2017 

High Power Diamond Devices with 2-D Transport Channels, D. I. Shahin, A. Christou, J. E. Butler, ECS Transactions, Vol: 80, Issue: 7, pp. 197-201, 2017, DOI: 10.1149/08007.0197ecst

ALD TiN Schottky Gates for Improved Electrical and Thermal Stability in III-N Devices , V. D. Wheeler, T. J. Anderson, M. J. Tadjer, A. D. Koehler, K. D. Hobart, F. J. KubC. R. Eddy Jr., S. Ahn, A. Christou, D. I. Shahin, F. Ren ECS Transactions, Volume: 80, Issue: 7, Pg: 197-201, 2017, DOI: 10.1149/08007.0197ecst

Achieving Vertical Trench-Gate GaN MOSFETs Via Process Optimization, D. I. Shahin, A. Christou, T.J. Anderson, ECS Transactions, Volume: 80, Issue: 7, Pg: 197-201, 2017, DOI: 10.1149/08007.0197ecst

Deconvolution of Spectral Power Distribution of HighPower, Pu Zhang, Dae-Suk Kim, Bongate Han, Applied Optics, Vol: 56, Issue: 20, pp. 5590-5598 

Failure of Polymer Aluminum Electrolytic Capacitors Under Elevated Temperature Humidity Environments, Anshul, Shrivastava, Michael Azarian, and Michael Pecht, IEEE Transactions on Components, Packaging, and Manufacturing Technology, 2017.

Risk of Tin Whiskers in the Nuclear Industry, Chien-Ming Huang, Daniel Nunez, James Coburn, and Michael Pecht, Microelectronics Reliability, Vol. 81 PP 22-30, December 8, 2017.

Assembly yield prediction of plastically encapsulated packages with a large number of manufacturing variables by advanced approximate integration method, Hsiu-Ping Wei, Byeng Dong Yuon, Bongtae Han, Hyuk Shin, Ilho Kim, and Hojeong Moon, Microelectronics Reliability, Vol: 78, pp. 319-330, November 2017.

A Prognostic Model for Stochastic Degrading Systems With State Recovery: Application to Li-Ion Batteries, Zheng-Xin Zhang, Xiao-Sheng Si, Chang-Hua Hu and Michael Pecht, IEEE Transactions on Reliability, Vol. PP, No. 99, September 2017.

A New Application for Failure Prognostics - Reduction of Automotive Electronics Reliability Test Duration, Andre Kleyner, Arvind Vasan, and Michael Pecht, Annual Conference of the Prognostics and Health Management Society 2017, pp 1-9, September 2017.

Electronic Circuit Health Estimation Through Kernel Learning, Arvind Vasan and Michael Pecht, IEEE Transactions on Industrial Electronics, Vol. PP, No. 99, July 2017.

A Double-Scale, Particle-Filtering, Energy State Prediction Algorithm for Lithium-Ion Batteries, Rui Xiong, Yongzhi Zhang, Hongwen He, Xuan Zhou, and Michael Pecht, IEEE Transactions on Industrial Electronics, PP 1526-1538, July 2017, DOI: 10.1109/TIE.2017.2733475.

Active battery cell equalization based on residual available energy maximization, Weiping Diao, Nan Xue, Vikram Bhattacharjee, Jiuchun Jiang, Orkun Karabasoglu, and Michael Pecht, Applied Energy, Vol. 210, PP 690-698, July 2017.

Current Noise Cancellation for Bearing Fault Diagnosis Using Time Shifting, Fardin Dalvand, Satar Dalvand, Fatemeh Sharafi, and Michael Pecht, IEEE Transactions on Industrial Electronics, Vol. 64, No. 10, October 2017.

Batteries in Portable Electronic Devices: A User's Perspective, Saurabh Saxena, Gustavo Sanchez and Michael G. Pecht,IEEE Industrial Electronics Magazine, Volume: 11, Issue: 2, Pg: 35-44. June 2017.

Prognostics-Based LED Qualification Using Similarity-Based Statistical Measure With RVM Regression Model , Moon-Hwan Chang, Myeongsu Kang, and Michael Pecht, IEEE Transactions on Industrial Electronics, Vol. 64, No. 7, July 2017.

Challenges and Research Issues of Data Management in IoT for Large-Scale Petrochemical Plants , Lei Shu, Mithun Mukherjee, Noel Crespi, Son n. Han and Michael G. Pecht, IEEE Systems Journal, pp. 1-15, 2017.

A Double-scale, Particle-filtering, Energy State Prediction Algorithm for Lithium-ion Batteries , Rui Xiong, Yongzhi Zhang, Hongwen He, Xuan Zhou and Michael G. Pecht IEEE Transactions on Industrial Electronics, pp. 1-1, 2017.

Color Shift Failure Prediction for Phosphor-Converted White LEDs by Modeling Features of Spectral Power Distribution with a Nonlinear Filter, Jiajie Fan, Moumouni Guero Mohamed, Cheng Qian, Xuejun Fan, Guoqi Zhang and Michael G. Pecht,MDPI Materials, Vol. 10, Issue 7, pp. 819, July 2017.

Deconvolution of spectral power distribution of high-power laser diode arrays, Pu Zhang, Dae-Suk Kim, and Bongtae Han,Applied Optics, Vol. 56, Issue 20, pp. 5590-5598, July 2017.

Preliminary Study on Integration of Fiber Optic Bragg Grating Sensors in Li-Ion Batteries and In Situ Strain and Temperature Monitoring of Battery Cells, Aleksandra Fortier, Max Tsao, Nick D. Williard, Yinjiao Xing, and Michael Pecht,Energies, Vol. 10, Issue 7, pp. 1-11, June, 2017.

Viscoplastic Properties of pressure-less sintered silver materials using indentation, D. Leslie, A. Dasgupta, and Carlos Morillo, Microelectronics Reliability, Vol. 74, 121-130, 2017.

Thermal degradation of Polyimide Insulation and Its Effect on Electromagnetic Coil Impedance, N. Jordan Jameson, Michael H. Azarian, and Michael Pecht, Proceedings of the Society for Machinery Failure Prevention Technology Conference, May 15-18, 2017, Virginia Beach, VA.

Shelf Life Evaluation Method for Electronic and other Components using a Physics of Failure (PoF) Approach, Nga Man Li, Diganta Das,and Michael Pecht, Proceedings of the Society for Machinery Failure Prevention Technology Conference, May 15-18, 2017, Virginia Beach, VA.

A Comparative Study on Anomaly Detection of the Combustion System in Gas Turbine, Jiao Liu, Myeongsu Kang, Jinfu Liu, Zhongqi Wang, Daren Yu,and Michael G. Pecht Proceedings of the Society for Machinery Failure Prevention Technology Conference, May 15-18, 2017, Virginia Beach, VA.

Fault Detection in Bearings Using Autocorrelation, Rushit N. Shah, Michael H. Azarian, Michael G. Pecht, Proceedings of the Society for Machinery Failure Prevention Technology Conference, May 15-18, 2017, Virginia Beach, VA.

Risk Assessment of Transition to Lead-free Electronics Assembly, Guru Prasad Pandian, Diganta Das, Michael Osterman, and Michael Pecht Proceedings of the Society for Machinery Failure Prevention Technology Conference, May 15-18, 2017, Virginia Beach, VA.

Influence of Secondary Impact on Printed Wiring Assemblies Part II: Competing Failure Modes in Surface Mount Components, Jingshi Meng and Abhijit Dasgupta, J. Electron. Packag, June 2017.

An Online SOC and SOH Estimation Model for Lithium-Ion Batteries, Shyh-Chin Huang, Kuo-Hsin Tseng, Jin-Wei Liang, Chung-Liang Chang, and Michael G. Pecht, Energies 2017, Issue 10, Vol. 4, April 2017; doi:10.3390/en10040512.

The Phenomenon of Tin Pest: A Review, Ben Cornelius, Shay Treivish, Yair Rosenthal, and Michael G. Pecht, Energies 2017, Issue 10, Vol. 4, April 2017; doi:10.1016/j.micorel.2017.10.030.

A Perspective of the IPC Report on Lead-Free Electronics in Military/Aerospace Applications, Aleksandra Fortiera and Michael G. Pecht, Microelectronics Reliability, Volume 69, pp. 66-70, February 2017.

Safety Requirements for Transportation of Lithium Batteries, Haibo Huo, Yinjiao Xing, Michael Pecht, Benno J. Zuger, Neeta Khare, and Andrea Vezzini, Energies, Vol. 10, pp. 793-833, June 2017.

A Review of Prognostic Techniques for High-Power White LEDs, Bo Sun, Xiaopeng Jiang, Kam-Chuen Yung, Jiajie Fan, and Michael Pecht, IEEE Transactions on Power Electronics, Vol. 32, No. 8, August 2017.

State of charge estimation based on a simplified electrochemical model for a single LiCo02 battery and battery pack,, Junfu Li, Lixin Wang, Chao Lyu, and Michael Pecht, Energies, Vol. 133, pp. 572-583, May 2017.

In Situ Stress Measurement Techniques on Li-ion Battery Electrodes: A Review, Ximing Cheng and Michael Pecht,Energies, Vol. 10, pp. 591-610, March 2017.

A Bayesian Nonlinear Random Effects Model for Identification of Defective Batteries from Lot Samples, Edward Cripps and Michael Pecht, Journal of Power Sources, Vol. 342, pp. 342-350, February 2017.

Interacting multiple model particle filter for prognostics of lithium-ion batteries, Xiaohong Su, Shuai Wang, Michael Pecht, Lingling Zhao, and Zhe Ye, Microelectronics Reliability, Vol. 70, pp. 59-69, February 2017.

Return on Investment Analysis and Simulation of a 9.12 Kilowatt (kW) Solar Photovoltaic System, Tyler Formica, and Michael Pecht, Solar Energy, Vol. 144, pp. 629-634, 1 March 2017.

Particle Learning Framework for Estimating the Remaining Useful Life of Lithium-Ion Batteries, Zhenbao Liu, Gaoyuan Sun, Shuhui Bu, Junwei Han, Xiaojun Tang, and Michael Pecht, IEEE Transactions on Instrumentation and Measurement, Vol. 66, No. 2, February 2017.

Prognostics of lithium-ion batteries based on different dimensional state equations in the particle filtering method, Xiaohong Su, Shuai Wang, Michael Pecht, Peijun Ma, Lingling Zhao, Transactions of the Institute of Measurement and Control 2017, Vol. 39(10) pp. 1537-1546, 2017.

 

Published in 2016

Back to the Top

Enhancement Mode AlGaN/GaN MOS High-electron-mobility Transistors with ZrO2 Gate Dielectric Deposited by Atomic Layer Deposition, Travis J. Anderson, Virginia D. Wheeler, David I. Shahin, Marko J. Tadjer, Andrew D. Koehler, Karl D. Hobart, Aris Christou, Francis J. Kub, and Charles R. Eddy Jr., Applied Physics Express, Vol. 9, No. 7, June 2016, doi: 10.7567/APEX.9.071003/meta.

Reliability Assessment of Thermally-Stable Gate Materials for AlGaN/GaN HEMTs, David I. Shahin, Travis J. Anderson, Jordan D. Greenlee, Virginia D. Wheeler, Marko J. Tadjer, Bradford B. Pate, Jennifer K. Hite, Andrew D. Koehler, Karl D. Hobart, Charles R. Eddy Jr., Francis J. Kub, and Aris Christou , CS ManTech Conference, May 16-19, 2016, Miami, Florida.

Electrical and Thermal Stability of ALD-Deposited TiN Transition Metal Nitride Schottky Gates for AlGaN/GaN HEMTs , David I. Shahin, Travis J. Anderson, Virginia D. Wheeler, Marko J. Tadjer, Andrew D. Koehler, Karl D. Hobart, Charles R. Eddy Jr., Francis J. Kub, and Aris Christou, ECS Journal of Solid State Science and Technology, Vol. 5, No. 7, pp. Q204-Q207, June, 2016.

Comparisons of Offshore Wind Turbine Reliability, Tatiana M. Delorm, Yizhou Lu, Aristos Christou, and Patrick McCluskey, Journal of Risk and Reliability, Vol. 230, No. 3, pp. 251-264, 2016, DOI: 10.1177/1748006X15624592.

An isolated/non-isolated novel multilevel inverter configuration for a dual three-phase symmetrical/asymmetrical star-winding converter, Sanjeevikumar Padmanaban and Michael Pecht, Engineering Science and Technology, an International Journal, Volume 19, Issue 4, December 2016, Pages 1763-1770. 

Moisture Ingress, Behavior, and Prediction Inside Semiconductor Packaging: A Review, Dae-Suk Kim, Bongate Han, Journal of Electronic Packaging, Vol: 139, Issue: 1, December 2016 

A Density-Based Clustering Method for Machinery Anomaly Detection, Jing Tian, Michael H. Azarian, and Michael Pecht, EEE Reliability Magazine, pp. 11-15, August 2016.

Lifetime Estimation of Insulated Gate Bipolar Transistor Modules Using Two-step Bayesian Estimation, Yizhou Lu, Student Member, IEEE, and Aris Christou, Fellow, IEEE, IEEE Transactions on Reliability, 2016, DOI 10.1109/TDMR.2017.2694158.

Rapid Assessment Testing of Polymer Aluminum Electrolytic Capacitors in Elevated Temperature-Humidity Environments, Anshul Shrivastava, Michael Azarian, and Michael Pecht, Journal of Failure Analysis and Prevention, Volume 16, Issue 6, 1059-1066, November 4, 2016, DOI: 10.1007/s11668-016-0184-0.

Cycle life testing and modeling of graphite/LiCoO2 cells under different state of charge ranges, Saurabh Saxena, Christopher Hendricks, and Michael Pecht, Journal of Power Sources, Vol. 327, pp. 394-400, September 2016.

Evaluation of Batteries for Safe Air Transport, Nicholas Williard, Christopher Hendricks, Bhanu Sood, Jae Sik Chung, and Michael Pecht, Energies, Vol. 9, PP. 340-353, March 2016.

Blister testing for adhesion strength measurement of polymer films subjected to environmental conditions, Kenny Mahan, David Rosen, and Bongtae Han, Journal of Electronic Packaging, Vol. 138, pp. 1-8, December 2016.

Novel Parametric Circuit Modeling for Li-Ion Batteries, Ximing Cheng, Liguang Yao, Yinjiao Xing, and Michael Pecht,Energies, Vol. 9, pp. 539-554, July 2016.

MEMS Packaging Reliability in Board-Level Drop Tests Under Severe Shock and Impact Loading Conditions Part I: Experiment, Jingshi Meng, Abhijit Dasgupta, and Stuart Douglas, IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 6, Issue 11 , pp. 1595-1603. November 2016.

Influence of Secondary Impact on Printed Wiring Assemblies Part I: High Frequency 'Breathing Mode' Deformations in the Printed Wiring Board, Jingshi Meng, Abhijit Dasgupta, Journal of Electronic Packaging, Vol. 138, pp. 010914 1-12, March 2016.

Lithium-ion battery state-of-charge estimation based on deconstructed equivalent circuit at different open-circuit voltage relaxation times, Xi-ming Cheng, Li-guang Yao, and Michael Pecht, Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), Vol. 18, pp. 256-267, March 2016.

Impact of dormancy periods on power cycling of insulated gate bipolar transistors (IGBTS), Nathan Valentine and Diganta Das, 2016 IEEE Accelerated Stress Testing & Reliability Conference (ASTR), Pensacola Beach, FL, 2016, pp. 1-6.

Critical review of U.S. Military environmental stress screening (ESS) handbook, Nga Man Li and Diganta Das, 2016 IEEE Accelerated Stress Testing & Reliability Conference (ASTR), Pensacola Beach, FL, 2016, pp. 1-10.

A Hybrid Feature Selection Scheme for Reducing Diagnostic Performance Deterioration Caused by Outliers in Data-Driven Diagnostics , Myeongsu Kang, Md. Rashedul Islam, Jaeyong Kim, Jong-Myon Kim, and Michael Pecht, IEEE Transactions on Industrial Electronics, Vol. 63, No. 5, May 2016 .

Effect of Epoxy Flux Underfill on Thermal Cycling Reliability of Sn-8Zn-3Bi Lead-Free Solder in a Sensor Application, M. Mostofizadeh, M. Najari, D. Das, M. Pecht, and L. Frisk, 2016 IEEE 66th Electronic Components and Technology Conference (ECTC), Las Vegas, NV, 2016, pp. 2169-2175.

Influence of Different Open Circuit Voltage Tests on State of Charge Online Estimation for Lithium-ion Batteries, Fangdan Zheng, Jiuchun Jiang, Bingxiang Sun, Jonghoon Kim, and Michael Pecht, Applied Energy, Vol. 183, Pages 513-525, 1 December 2016.

A Stretchable and Screen-Printable Conductive Ink for Stretchable Electronics, Anwar Mohammed and Michael Pecht,Applied Physics Letter, Vol. 109, Issue 18, November 2016.

Measurement of elastic properties of epoxy molding compound by single cylindrical configuration with embedded fiber bragg grating sensor, Y. Sun, H.-S. Lee, and B. Han, Experimental Mechanics, Vol. 57, pp. 313-324, 18 October 2016.

Temperature Dependent Power Capability Estimation of Lithium-ion Batteries for Hybrid Electric Vehicles, Fangdan Zheng, Jiuchun Jiang, Bingxiang Sun, Weige Zhang, and Michael Pecht, Energy, Volume 113, Pages 64-75, 15 October 2016.

Reliability of Conformal Coated Surface Mount Packages, Deng Yun Chen and Michael Osterman, IEEE 2016 Accelerated Stress Testing and Reliability (ASTR) Conference, September 28-30, 2016, Pensacola, Florida.

Reliability of Corner Staked Surface Mount Packages, Deng Yun Chen and Michael Osterman, IEEE 2016 Accelerated Stress Testing and Reliability (ASTR) Conference, September 28-30, 2016, Pensacola, Florida.

Method for predicting junction temperature distribution in a high-power laser diode bar, Dae-Suk Kim, Caleb Holloway, Bongtae Han and Avram Bar-Cohen, Applied Optics, Vol 55, No 27, 7487-7496, 12 September, 2016.

Reliability Design of Residential-Sized Refrigerators Subjected to Repetitive Random Vibration Loads during Transportation, Seong-Woo Woo and Michael Pecht, International Journal of Advanced Engineering, Management and Science (IJAEMS), Vol. 2, no.5, pp 350-359, May 2016, ISSN: 2454-1311.

A Massively Parallel Approach to Real-Time Bearing Fault Detection Using Sub-Band Analysis on an FPGA-Based Multicore System, Myeongsu Kang, Jaeyoung Kim, In-Kyu Jeong, Jong-Myon Kim and Michael Pecht, IEEE Transactions on Industrial Electronics, Vol. 63, no.10, pp 6325-6335, October 2016, doi:10.1109/TIE.2016.2574986.

A Modified Levelized Cost of Energy Model to Provide Purchase Prices and Price Schedules to Power Purchase Agreement, Maira Bruck, Navid Goudarzi, and Peter Sandborn, Proceedings of the European Wind Energy Association, Hamburg, Germany, Sept. 2016.

RoHS compliance in safety and reliability critical electronics, Michael Pecht, and Elviz George, Microelectronics Reliability, 2016.

A fusion prognostics-based qualification test methodology for microelectronic products, Michael Pecht, Tadahiro Shibutani, Myeongsu Kang, Melinda Hodkiewicz, and Edward Cripps, Microelectronics Reliability, Vol. 63, pp 320-324, August 2016, DOI:10.1016/j.microrel.2016.04.002.

A reliability assessment guide for the transition planning to lead-free electronics for companies whose products are RoHS exempted or excluded, Michael Pecht, Tadahiro Shibutani, and Lifeng Wu, Microelectronics Reliability, Vol. 62, pp 113-123, July 2016, DOI:10.1016/j.microrel.2016.03.020.

A Sequential k-Nearest Neighbor Classification Approach for Data-Driven Fault Diagnosis Using Distance- and Density-Based Affinity Measures, Myeongsu Kang, Gopala Krishnan Ramaswami, Melinda Hodkiewicz, Edward Cripps, Jong-Myon Kim and Michael Pecht, Springer International Publishing Switzerland, Vol. 9714, pp 253-261, June 2016.

Modified single cantilever adhesion test for EMC/PSR interface in thin semiconductor packages, Kenny Mahan, Byung Kim, Bulong Wu, Bongtae Han, Ilho Kim, Hojeong Moon, Young Nam Hwang, Microelectronics Reliability, Vol. 63, 134-141, June 2016.

Position and enforcement practice of the People's Republic of China's pharmaceutical data exclusivity protection, Na Li, Xiang Yu, and Michael Pecht, Drug Design, Development and Therapy, Dovepress, Vol. 2016:10, pp 2015-2020, June 2016, DOI: 10.1007/978-3-319-40973-3_25.

Creep fatigue models of solder joints: A critical review, E.H. Wong, W.D. Van Driel, A. Dasgupta, and M. Pecht,Microelectronics Reliability, Vol. 59, pp 1-12, April 2016, DOI:10.1016/j.microrel.2016.01.013.

Measurement of the comprehensive viscoelastic properties of advanced EMC using FBG sensor, Yong Sun, Hyun-Seop Lee, and Bongtae Han, Proceedings of 2016 66th Electronic Components and Technology Conference, Las Vegas, NV, May 31-June 3, 2016.

A Levelized Cost of Energy (LCOE) Model for Wind Farms that Includes Power Purchase Agreement (PPA) Energy Delivery Limits, Maira Bruck, Navid Goudarzi, and Peter Sandborn, Proceedings of the ASME 2016 Power Conference PowerEnergy2016.

The Effect of Yaw Error on the Reliability of Wind Turbine Blades, Roozbeh Bakhshi and Peter Sandborn, Proceedings of the ASME 2016 Power Conference PowerEnergy2016.

Context-driven decisions for railway maintenance, R. Villarejo, D. Galar, P. Sandborn and U. Kumar, Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, Vol. 230 No. 5, pp. 1469-1483, July 2016.

PHM-Based Wind Turbine Maintenance Optimization Using Real Options, X. Lei and P.A. Sandborn, International Journal of Prognostics and Health Management, Vol. 7, No. 1, 2016.

Applying Forgotten Lessons in Field Reliability Data Analysis to Performance-Based Support Contracts, E. Settanni, N. E. Thenent, L. B. Newnes, G. Parry, Y. M. Goh, and P. Sandborn, Engineering Management Journal, Vol. 28, No. 1, pp. 3-13, 2016, http://dx.doi.org/10.1080/10429247.2015.1130508.

Review of Quantitative Methods for Designing Availability-Based Contracts, A. R. Kashani Pour, P. Sandborn, and Q. Cui,Journal of Cost Analysis and Parametrics, Vol. 9, pp. 69-91, 2016, DOI:10.1080/1941658X.2016.1155185.

Motor bearing fault detection using spectral kurtosis-based feature extraction coupled with k-nearest neighbor distance analysis, Jing Tian, Carlos Morillo, Michael H. Azarian, Michael Pecht, IEEE Transactions on Industrial Electronics, Vol. 63, No. 3, 1793-1803, March 2016.

In-situ investigation of EMC relaxation behavior using piezoresistive stress sensor, Alicja Palczynska, Przemyslaw Jakub Gromala, Dirk Mayer, Bongtae Han, Tobias Melz, Microelectronics Reliability, Vol 62, 58-62, March 2016.

Effect of gold and copper in AUSN4 deposition and isothermal durability of SAC305 solder joints, Subhasis Mukherjee, Carlos Morillo, Lay-Ling Ong, Julie Silk and Abhijit Dasgupta, Surface Mount Technology Association, Vol 29, Issue 1, 20-30, March 2016.

Probabilistic lifetime prediction of electronic packages using advanced uncertainty propagation analysis and model calibration, Hyunseok Oh, Hsiu-Ping Wei, Bongtae han and Byeng D. Youn, IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol 6, No 2, 238-248, February 2016.

Effect of junction temperature on heat dissipation of high power light emitting diodes, Dae-Suk Kim and Bongtae Han,Journal of Applied Physics, Vol. 119, 1-8, January 2016.

 

Published in 2015

Back to the Top

---

Offshore Wind Turbine Sub-assembly Failure Rates Through Time , James Carroll, Alasdair McDonald, Oswaldo Barrera Martin, David McMillan, Roozbeh Bakhshi, Scientific Proceedings, EWEA Annual Conference and Exhibition 2015, Paris expo Porte de Versailles, Paris, France, Nov 15-17, 2015.

In-situ Characterization of Defect Dynamics in 4H-SiC Power Diodes under High-Voltage Stressing , Krishna Shenai, Balaji Raghothamachar, Michael Dudley, and Aris Christou, ECS Transactions , Vol. 66, No. 1, pp. 205-216, 2015, doi: 10.1149/06601.0205ecst.

A Prognostics and Health Management Method for Instrumentation System Remanufacturing, Kai Wang, Aidong Xu, Jing Tian, and Michael Pecht, IEEE Conference on Technologies for Sustainability (SusTech), pp. 63-66, 2015.

Ultraviolet Detector Based on Graphene/SiC Heterojunction, Travis J. Anderson, Karl D. Hobart, Jordan D. Greenlee, David I. Shahin, Andrew D. Koehler, Marko J. Tradjer, Eugene A. Imhoff, Rachel L. Myers-Ward, Aris Christou, and Francis J. Kub, Applied Physics Express, Vol. 8, pp. 041301-1 - 041301-3, March, 25, 2015.

Thermal Etching of Nanocrystalline Diamond Films, David I. Shahin, Travis J. Anderson, Tatyana I. Feygelson, Bradford B. Pate, Virginia D. Wheeler, Jordan D. Greenlee, Jennifer K. Hite, Marko J. Tadjer, Aristos Christou, and Karl D. Hobart, Diamond & Related Materials, Vol. 59, pp 116-121, September 30, 2015, DOI: 10.1016/j.diamond.2015.09.017.

Failure Mechanisms of Ball Bearings Under Lightly Loaded, Non-Accelerated Usage Conditions , Hyunseok Oh, Michael H. Azarian, Carlos Morillo, Michael Pecht, and Edward Rhem, Tribology International, Vol. 81, pp. 291-299, DOI: 10.1016/j.triboint.2014.09.014.

Fault Diagnostic Opportunities for Solenoid Operated Valves Using Physics-of-Failure Analysis , N. Jordan Jameson, Michael Azarian, and Michael Pecht, 2014 International Conference on Prognostics and Health Management, Cheney, WA, 22-25 June, 2014.

Health Monitoring of Cooling Fan Bearings Based on Wavelet Filter , Wei He, Qiang Miao, Michael Azarian, and Michael Pecht, Mechanical Systems and Signal Processing, Vols. 64-65, pp. 149-161, December, 2015, DOI: 10.1016/j.ymssp.2015.04.002.

Opportunistic Maintenance for Multi-component Systems Considering Structural Dependence and Economic Dependence , Junbao Geng, Michael H. Azarian, and Michael G. Pecht, Journal of Systems Engineering and Electronics, Vol. 26, No. 3, June 2015, pp.493 – 501.

Remaining-Life Prediction of Solder Joints Using RF Impedance Analysis and Gaussian Process Regression , Daeil Kwon, Michael H. Azarian, and Michael G. Pecht, IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 5, No. 11, November 2015.

A Failure Modes, Mechanisms, and Effects Analysis (FMMEA) of Lithium-ion Batteries, Christopher Hendricks, Nick Williard, Sony Mathew, and Michael G. Pecht, Journal of Power Sources, Vol. 297, PP. 113-120, 2015, DOI: https://doi.org/10.1016/j.jpowsour.2015.07.100.

Thermal Fatigue Reliability Analysis and Structural Optimization Based on a Robust Method for Microelectronics FBGA Packages, Yi Wan, Hailong Huang, and Michael G. Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 15, Issue. 2, PP. 206-213, 2017, DOI: 10.1109/TDMR.2015.2417888.

Designing Accelerated Life test for a Liquid Damage Indicator to Detect Warranty Abuse in Portable Electronics ,K. Kim, B.D. Youn, H. Oh, S. Choi, and Michael Pecht, 3rd International Conference on Materials and Reliability, Jeju, Korea, November 23-25, 2015.

Influence of Secondary Impact on Failure Modes in PWAs With High Resonant Frequency, Jingshi Meng and Abhijit Dasgupta, ASME International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK), San Francisco, CA, November 2015, p. V002T02A042.

Effects of Voiding on Thermomechanical Reliability of Copper-Filled Microvias: Modeling and Simulation, Yan Ning, Michael Azarian, and Michael Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 15, PP. 500-510, No. 4, December 2015.

Thermal cycling reliability of Sn-Zn lead-free solders in sensor application, M. Mostofizadeh, D. Das, M. Pecht, and L. Frisk, IEEE 65th Electronic Components and Technology Conference (ECTC), 2015.

A Life Model for Supercapacitors, Nick Williard, Dongcheon Baek, Jong Won Park, Byung-Oh Choi, Michael Osterman, and Michael Pecht, IEEE Transactions On Device and Materials Reliability, Vol. 15, No. 4, December 2015.

An Empirical Model to Describe Performance Degradation for Warranty Abuse Detection in Portable Electronics, Hyunseok Oh, Seunghyuk Choi, Keunsu Kim, Byeng D. Youn, Michael Pecht, Reliability Engineering and System Safety, Vol. 142, PP. 92-99, October 2015, DOI: 10.1016/J.RESS.2015.04.019.

Influence of Varying H2S Concentration and Humidity Levels on ImAg and OSP Surface Finishes, Amer Charbaji, Michael Osterman, and Michael Pecht, International Journal of Mechanical Engineering and Technology (IJMET), December 2015.

Characterization of die-attach thermal interface of high-power light-emitting diodes: An inverse approach, Dae-Suk Kim, Bongtae Han and Avram Bar-Cohen, IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol 5, No 11, 1635-1643, November 2015.

PHM Based Predictive Maintenance Option Model for Offshore Wind Farm O&M Optimization, X. Lei, P. Sandborn, N. Goudarzi Proceedings of the Annual Conference of the PHM Society, San Diego, CA October 2015.

Autocorrelation-based time synchronous averaging for condition monitoring of planetary gearboxes in wind turbines, Jong M. Ha, Byeng D. Youn, Hyunseok Oh, Bongtae Han, Yoongho Jung and Jungho Park, Mechanical Systems and Signal Processing, 70-71, 161-175, 23 October 2015.

Reliability of Manganese Dioxide and Conductive Polymer Tantalum Capacitors under Temperature Humidity Bias Testing, Anto Peter, Michael H. Azarian, Michael Pecht, International Microelectronics Symposium (IMAPS 2015) Orlando, FL. October 2015.

Evaluation of ENEPIG and Immersion Silver Surface Finishes Under Drop Loading, Adam Pearl, Michael Osterman, and Michael Pecht, Journal of ELECTRONIC MATERIALS, @ 2015 The Minerals, Metals & Materials Society, DOI: 10.1007/s11664-015-4104-y.

Failure Analyses of Modern Power Semiconductor Devices, N. Valentine, B. Sood, D. Das, M. Pecht, IMAPS 48th International Symposium on Microelectronics, Orlando, FL, October 27-29, 2015.

Conflict Minerals in Electronic Systems: An Overview and Critique of Legal Initiatives, N. Jordan Jameson, Xin Song and Michael Pecht. Sci Eng Ethics, September 2015, 10.1007/s11948-015-9704-7.

Effect of Temperature on the Aging rate of Li Ion Battery Operating above Room Temperature, Feng Leng, Chen Ming Tan and Michael G. Pecht. Scientific Reports, 5:12967, August 2015, DOI: 10.1038/srep12967.

Field Reliability Estimation for Cochlear Implants, Liliane L. Tessa, Bhanu P. Sood and Michael G. Pecht. IEEE Transactions Biomedical Engineering Vol. 62, pp 2062-2069, August 2015, DOI: 10.1109/TBME.2015.2457155.

Evaluating the Impact of Dwell Time on Solder Interconnect Durability under Bending Loads, Sandeep Menon, Michael Osterman and Michael Pecht , Journal of Electronic Materials. DOI: 10.1007/s11664-015-3931-1.

The Forecasting and Impact of the Loss of Critical Human Skills Necessary for Supporting Legacy Systems, P. SandbornIEEE TRANSACTIONS ON ENGINEERING MANAGEMENT, VOL. 62, NO. 3, AUGUST 2015.

Forecasting Technology and Part Obsolescence, P. Sandborn Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2015.

A Real Options Approach to Quantity and Cost Optimization for Lifetime and Bridge Buys of Parts, Peter Sandborn and Navid Goudarzi Proceedings of the COG International Conference, Edinbough, Scotland, June 2015.

PHM Based Predictive Maintenance Optimization for Offshore Wind Farms, Xin Lei, Peter Sandborn, Roozbeh Bakhshi, Amir Kashani-Pour and Navid Goudarzi Proceedings of the IEEE Prognostics and Health Management, Austin, TX, June 2015.

Physics-of-Failure, Condition Monitoring and Prognostics of Insulated Gate Bipolar Transistor Modules: A Review, Hyunseok Oh, Bongtae Han, Patrick McCluskey, Changwoon Han and Byeng D. Youn. IEEE Transactions of Power Electronics, Vol. 30, No. 5, 2413-2426, May 2015.

Assessing the value of a lead-free solder control plan using cost-based FMEA, P. Sandborn, Edwin Lillie and David Humphrey Microelectronics Reliability, Vol. 55, No. 6, pp. 969-979, May 2015.

Anomaly detection for IGBTs using Mahalanobis distance, Nishad Patil, Diganta Das and Michael Pecht , Microelectronics Reliability 55, pp 1054-1059, April 2015, DOI:10.1016/j.microrel.2015.04.001.

Influence of Plating Quality on Reliability Microvias, Yan Ning, Michael Azarian, and Michael Pecht , IPC APEX EXPO Conference Proceedings, February, 2015.

A return on investment analysis of applying health monitoring to LED lighting systems, Moon-Hwan Chang, Peter Sandborn, Michael Pecht, Winco K.C. Yung, Wenbin Wang , Microelectronics Reliability, Vol. 55, pp. 527-537, March 2015.

An evaluation of dwell time and mean cyclic temperature parameters in the Engelmaier model, Elviz George, Michael Osterman and Michael Pecht , Microelectronics Reliability 55, pp 582-587, Feb - March 2015, DOI:10.1016/S0026-2714(15)00039-6.

High Lead (over 85 %) Solder in the Electronics Industry: RoHS Exemptions and Alternatives, Sandeep Menon, Elviz George, Michael Osterman and Michael Pecht , Journal of Materials Science: Materials in Electronics, March 4 2015, DOI: 10.1007/s10854-015-2940-4.

Failure Mechanisms of Ball Bearings Under Lightly Loaded, Non-Accelerated Usage Conditions, Hyunseok Oh, Michael H.Azarian, Carlos Morillo, Michael Pecht, Edward Rhemb, Tribology International, Vol. 81, pp 291-299, January 2015, DOI: 10.1016/j.triboint.2014.09.014.

A cloud model-based method for the analysis of accelerated life test data, Wenjin Zhang, Shunli Liu, Bo Sun, Yue Liu and Michael Pecht, Microelectronics Reliability, 55, pp 123-128, 2015.

Return on Investment Modeling to Support Cost Avoidance Business Cases for Wind Farm O&M, Roozbeh Bakhshi, Peter Sandborn, Xin Lei and Amir Kashani-Pour , EWEA Offshore 2015, Copenhagen, Denmark, March 10-12, 2015.

A Bayesian Approach for Li-Ion Battery Capacity Fade Modeling and Cycles to Failure Prognostics , Jian Guo, Zhaojun Li and Michael Pecht , Journal of Power Sources, Vol. 281, no. 0, pp. 173-184, January 30, 2015, DOI:10.1016/j.jpowsour.2015.01.164.

Development of a Maintenance Option Model to Optimize Offshore Wind Farm O&M , Xin Lei, Peter Sandborn, Roozbeh Bakhshi and Amir Kashani-Pour , EWEA Offshore 2015, Copenhagen, Denmark, March 10-12, 2015.

 

Published in 2014

Back to the Top

---

LT-TLPS Die Attach for High Temperature Electronic Packaging, H. Greve, and F. P. McCluskey,  J. Microelectronics and Electronic Packaging, Vol.11 No. 1, pp. 7-15. (2014)

Strength and Reliability of High Temperature Transient Liquid Phase Sintered Joints, S. Ali Moeini, Hannes Greve and F. Patrick McCluskey,  HiTEC Conference, (January 2014) pp. 000355-000363

Prognostics and Health Management based Refurbishment for Life Extension of Electronic Systems, Prabhakar V. Varde, Jing Tian, and Michael G. Pecht , Proceedings of the IEEE International Conference on Information and Automation, July, 2014, Hailar, China.

Analysis of the Kinetics of Electrochemical Migration on Printed Circuit Boards Using Nernst-Planck Transport Equation, Xiaofei He, Michael H. Azarian, and Michael G. Pecht , Electrochimica Acta, Vol. 142, pp. 1-10, 2014.

Effects of Voiding on the Degradation of Microvias in High Density Interconnect Printed Circuit Boards Under Thermomechanical Stresses, Roozbeh Bakhshi, Michael H. Azarian, and Michael G. Pecht , IEEE Transactions of Components, Packaging and Manufacturing Technology, Vol. 4, No. 8, August 2014.

Adhesion and Puncture Strength of Polyurethane Coating Used to Mitigate Tin Whisker Growth, Kenny Mahan, Yong Sun, Bongtae Han, Sungwon Han, and Mike Osterman , Journal of Electronic Packaging, Vol. 136, SEPTEMBER 2014.

A Lead-Free Transition Plan for Safety and Reliability Critical Products, Elviz George, and Michael Pecht , International Conference on challenges in IT, Engineering and Technology (ICCIET 2014) July 17-18, 2014 Phuket (Thailand).

Simulation of the Influence of Manufacturing Quality on Thermomechanical Stress of Microvias , Yan Ning, Michael Azarian, and Michael Pecht , 2014 IPC APEX EXPO Conference Proceedings, February, 2014.

Fusion Prognostics Based Qualification of Microelectronic Devices, Michael Pecht, Elviz George, Arvind Vasan , 2014 IEEE 21st International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA).

An Examination of Glass-fiber and Epoxy Interface Degradation in Printed Circuit Boards, Bhanu Sood, Michael Osterman, and Michael Pecht ,IPC APEX Expo, March 25-27, 2014, Las Vegas, NV.

Thermal Cycling Reliability of Alternative Low-Silver Tin-Based Solders, Elviz George, Michael Pecht, Michalel Osterman, Richard Coyle, Richard Parker and Elizabeth Benedetto ,Journal of Microelectronis and Electronic Packaging (2014) 11, 137-145.

Evaluating covariance in prognostic and system health management applications, Sandeep Menon, Xiaohang Jin, Tommy W.S.Chow and Michael Pecht , Mechanical Systems and Signal Processing 58-59 (2015) 206-217.

Review of Capabilities of the ENEPIG Surface Finish, Menahem Ratzker, Adam Pearl, Michael Osterman, Michael Pecht and George Milad, Journal of Electronic Materials, Volume 43, pp 3885-3897, November 2014, DOI: 10.1007/s11664-014-3322-z.

State of Charge Estimation of Lithium-Ion Batteries Using the Open-Circuit Voltage at Various Ambient Temperatures, Yinjiao Xing, Wei He, Michael Pecht and Kwok Leung Tsui, Applied Energy, Volume 113, pp 106-115, January 2014, DOI: 10.1016/j.apenergy.2013.07.008.

State of Charge Estimation for Li-Ion Batteries Using Neural Network Modeling and Unscented Kalman Filter-based Error Cancellation, Datong Liu, Yue Luo, Jie Liu, Yu Peng, Limeng Guo and Michael Pecht, International Journal of Electrical Power & Energy Systems, Volume 62, pp 783-791, November 2014, DOI: 10.1016/j.ijepes.2014.04.059.

Lithium-Ion Battery Remaining Useful Life Estimation Based on Fusion Nonlinear Degradation AR Model and RPF Algorithm, Datong Liu, Yue Luo, Jie Liu, Yu Peng, Limeng Guo and Michael Pecht, Neural Computing and Applications, Volume 25, Issue 3-4, pp 557-572, September 2014, DOI: 10.1007/s00521-013-1520-x.

A Generic Model-Free Approach For Lithium-Ion Battery Health management, Guangxing Bai, Pingfeng Wanga, Chao Hub and Michael Pecht, Applied Energy, Vol. 135, pp 247-260, December 15, 2014, DOI: 10.1016/j.apenergy.2014.08.059.

Mapping Mechanical Properties of Lead-Free Solder Joints, Carlos Morillo, Jennifer L. Hay and Julie Silk, Proceedings of SMTA International, September 28 - October 2, 2014, Rosemont, IL.

Effects of Voiding on the Degradation of Microvias in High Density Interconnect Printed Circuit Boards Under Thermomechanical Stresses, Roozbeh Bakhshi, Michael H. Azarian and Michael G.Pecht, IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 4, Issue 8, pp 1374-1379, August 12, 2014, DOI: 10.1109/TCPMT.2014.2322105.

In Situ Interconnect Failure Prediction Using Canaries , Preeti Chauhan, Sony Mathew, Michael Osterman and Michael Pecht, IEEE Transactions On Device and Materials Reliability, Vol. 14, No. 3, pp 826-832, September 2014, DOI: 10.1109/TDMR.2014.2326184.

Anomaly Detection of Light-Emitting Diodes Using the Similarity-Based-Metric Test , Moon-Hwan Chang, Chaochao Chen, Diganta Das and Michael Pecht, IEEE Transactions on Industrial Informatics, Vol. 10, No. 3, pp 1852-1863, August 2014, DOI: 10.1109/TII.2014.2332116.

Measurement of effective chemical shrinkage and equilibrium modulus of silicone elastomer used in potted electronic system , Yong Sun, Bongtae Han, Ehsan Parsa and Abhijit Dasgupta, Journal of Materials Science, Vol 49, No 24, 8301-8312, August 2014, DOI: 10.1007/s10853-014-8538-z.

Prognostics of Lumen Maintenance for High Power White Light Emitting Diodes Using a Nonlinear Filter-based Approach , Jiajie Fan, Kam-Chuen Yung and Michael Pecht, Reliability Engineering & System Safety, Vol. 123, pp 63-72, March 2014, DOI:10.1016/j.ress.2013.10.005.

Prognostics of Chromaticity State for Phosphor-Converted White Light Emitting Diodes Using an Unscented Kalman Filter Approach , Jiajie Fan, Kam-Chuen Yung and Michael Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 14, No. 1, pp 564-573, March 2014, DOI:10.1109/TDMR.2013.2283508.

Scintillation Conditioning of Tantalum Capacitors With Manganese Dioxide Cathodes, Thomas Fritzler, Michael H. Azarian, and Michael G. Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 14, No. 2, pp 630-638, June 2014, DOI: 10.1109/TDMR.2014.2314731.

The Effect of Temperature on the Electro-chemistry in Lithium-ion Batteries, Feng Lenga, Cher Ming Tana, Michael Pecht and JiYe Zhanga, 3rd Int'l Symp. On Next-Generation Electronics, Taoyuan, Taiwan, pp 1-4, May 7-10, 2014, DOI: 10.1109/ISNE.2014.6839339.

Motor Bearing Fault Diagnosis Using Trace Ratio Linear Discriminant Analysis, Xiaohang Jin, Mingbo Zhao, Tommy W. S. Chow and Michael Pecht, IEEE Transactions On Industrial Electronics, Vol. 61, No. 5, pp 2441-2445, May 2014, DOI: 10.1109/TIE.2013.2273471.

Evaluating the End of Maintenance Dates for Electronic Assemblies Composed of Obsolete Parts, A. Konoza and P. Sandborn, ASME Journal of Mechanical Design, Vol. 136, No. 3, Jan 10, 2014, DOI: 10.1115/1.4026096.

Detection and Reliability Risks of Counterfeit Electrolytic Capacitors, Anshul Shrivastava, Michael H. Azarian, Carlos Morillo, Bhanu Sood and Michael Pecht, IEEE Transactions on Reliability, Vol. 63, No. 2, pp 468-479, June 2014, DOI:10.1109/TR.2014.2315914.

Experiment and Simulation of Board Level Drop Tests With Intentional Board Slap at High Impact Accelerations, Stuart T. Douglas, Moustafa Al-Bassyiouni, and Abhijit Dasgupta, IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 4, No. 4, pp 569-580, April 2014, DOI:10.1109/TCPMT.2013.2293761.

Prognostics of Chromaticity State for Phosphor-Converted White Light Emitting Diodes Using an Unscented Kalman Filter Approach, Jiajie Fan, Kam-Chuen Yung and Michael Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 14, No. 1, pp 564-573, March 2014, DOI:10.1109/TDMR.2013.2283508.

Hygrothermal behavior of advanced polymers above water boiling temperatures, Changsoo Jang and Bongtae Han, Journal of Electronic Packaging, Vol. 136, 365-374, March 2014.

Analytical/Experimental hybrid approach based on spectral power distribution for quantitative degradation analysis of phosphor converted LED, Bong-Min Song and Bongtae Han, IEEE Transactions on Device Materials Reliability, Vol 14, No 1, 1-6, March 2014.

Thermomechanical reliability of a silver nano-colloid die attach for high temperature applications, P. Quintero, P. McCluskey, and B. Koenei, Microelectronics Reliability, Vol. 54, Issue 1, pp 220-225, January 2014, DOI:10.1016/j.microrel.2013.08.002.

Strain-Range-Based Solder Life Predictions Under Temperature Cycling With Varying Amplitude and Mean, Fei Chai, Michael Osterman and Michael Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 14, No. 1, pp 351-357 March 2014, DOI:10.1109/TDMR.2013.2273121.

Tin whisker analysis of an automotive engine control unit, Elviz George and Michael Pecht, Microelectronics Reliability, Vol. 54, Issue 1, pp 214-219, January 2014, DOI:10.1016/j.microrel.2013.07.134.

Introduction to LED Thermal Management and Reliability, Michael Pecht, Diganta Das, Moon-Hwan Chang, Thermal Management for LED Applications, Solid State Lighting Technology and Application Series, Vol. 2, pp 3-14, 2014, DOI:0.1007/978-1-4614-5091-7_1.

Counterfeit capacitors in the supply chain, Anshul Shrivastava and Michael Pecht, Journal of Materials Science: Materials in Electronics, Vol. 25, Issue 2, pp 645-652, February 2014, DOI:10.1007/s10854-013-1147-9.

Intermittent Failures in Hardware and Software, Roozbeh Bakhshi, Surya Kunche and Michael Pecht, Journal of Electronic Packaging, Vol. 136, Issue 1, pp 011014-1, March 2014, DOI:10.1115/1.4026639.

Board level reliability analysis of chip resistor assemblies under thermal cycling: A comparison study between SnPb and SnAgCu , Changwoon Han and Bongtae Han, Journal of Mechanical Science and Technology, Vol 28, Issue 3, 879-886, 2014.

Published in 2013

Back to the Top

---

Effect of Multiple Faults and Fault Severity on Gearbox Fault Detection in a Wind Turbine using Electrical Current Signals ,Ranjith Kumar Sreenilayam Raveendran , Michael H. Azarian, Nam-Ho Kim, and Michael G. Pecht, Chemical Engineering Transactions, Vol. 33, PP.79-84, 2013, DOI: 10.3303/CET1333014.

Remaining Useful Life Prediction of Lithium-ion Battery with Unscented Particle Filter Technique ,Michael Pecht, Qiang Miao, Lei Xie, Hengjuan Cui, and Wei Liang, Microelectronics Reliability, Vol. 53, Issue. 6, PP. 805-810, June 2013.

Dual-configuration fiber Bragg grating sensor technique to measure coefficients of thermal expansion and hygroscopic swelling ,Y. Sun, Y. Wang, Y. Kim and B. Han, Experimental Mechanics, Vol 54, No 4, 593-605, November 2013, DOI: 10.1007/s11340-013-9804-8.

Degradation analysis of secondary lens system and its effect on performance of LED-based luminaire ,Dae-Suk Kim, Bongtae Han and Youn-Jea Kim, Microelectronics Reliability, Vol. 54, No. 1, September 2013.

Detection of Capacitor Electrolyte Residues with FTIR in Failure Analysis ,Anshul Shrivastava, Stefan Bangerth, Michael H. Azarian, Carlos Morillo, Michael Pecht, Mark Levin, Larry Steinhardt and Andrew Callini, Journal of Materials Science: Materials in Electronics, Vol. 25, No. 2, March 2013.

Optimized Diagnostic Model Combination for Improving Diagnostic Accuracy , Surya Kunche, Chaochao Chen, and Michael Pecht, 2013 IEEE Aerospace Conference, 2-9 March, 2013.

A Bayesian Hidden Markov Model-Based Approach for Anomaly Detection in Electronic Systems ,Enkhjargal Dorj, Chaochao Chen, and Michael Pecht, 2013 IEEE Aerospace Conference, 2-9 March, 2013.

Challenges in the Qualification of Electronic Components and Systems ,Vidyu Challa, Peter Rundle, and Michael Pecht, IEEE Transactions on Device and Material Reliability, Vol. 13, No. 1, March 2013.

Modeling the Rate-Dependent Durability of Reduced-Ag SAC Interconnects for Area Array Packages Under Torsion Loads ,Vikram Srinivas, Sandeep Menon, Michael Osterman and Michael G. Pecht, Journal of ELECTRONIC MATERIALS, Vol. 42, No. 8, 2013.

Prognostics of Lithium-Ion Batteries Based on Relevance Vectors and a Conditional Three-Parameter Capacity Degradation Model , Dong Wang, Qiang Miao, Michael Pecht , Journal of Power Sources, Volume 239, pp. 253-264, October 1, 2013, DOI:10.1016/j.jpowsour.2013.03.129.

Effect of Temperature and Relative Humidity on the Impedance Degradation of Dust-Contaminated Electronics , Bo Songz, Michael H. Azarian and Michael G. Pecht, The Journal of The Electrochemical Society, 2013, Vol.160, Issue 3, C97 - C105, DOI: 10.1149/2.024303jes.

Modeling the Electrical Conduction in Epoxy-BaTiO3 Nano-composites , Mohammed Alam, Michael Azarian and Michael Pecht, The Journal of Electronic Materials, Vol. 42, No. 6, pp 1101-1107, June 2013, DOI: 10.1007/s11664-013-2523-1.

Rare-Earth Elements in Lighting and Optical Applications and Their Recycling , Xin Song, Moon-Hwan Chang and Michael Pecht, The Journal of the Minerals, Metals & Materials Society (JOM), Vol. 65, No. 10, pp 1276-1282, August 2013.

Online Anomaly Detection for Hard Disk Drives Based on Mahalanobis Distance, Yu Wang, Qiang Miao, Eden W.M.Ma, Kwok-Leung Tsui and Michael G. Pecht, IEEE Transactions on Reliability, Vol. 62, No. 1, pp 136-145, March 2013, DOI: 10.1109/TR.2013.2241204.

Comparative Analysis of Features for Determining State of Health in Lithium-Ion Batteries, Nick Williard, Wei He, Michael Osterman, and Michael Pecht, International Journal of the PHM Society Special No.: Battery Management, Vol. 4, No. 1, pp 1-7, 2013.

Optimum Design Domain of LED-based Solid State Lighting Considering Cost, Energy Consumption and Reliability, Bong-Min Song, Bongtae Han and Joon-Hyun Lee, Microelectronics Reliability, Vol. 53, No. 3, pp 435-442, March 2013, DOI: 10.1016/j.microrel.2012.10.010.

Comparative Evaluation of Metal and Polymer Ball Bearings, Ranjith-Kumar Sreenilayam-Raveendrana, Michael H. Azarian, Carlos Morillo, Michael Pecht, Katsuyuki Kida, E.C. Santos, Takashi Honda, Hitonobu Koike, Wear Journal, Vol. 302, No. 1-2, April-May 2013, DOI: 10.1016/j.wear.2013.01.057.

Using Maintenance Options to Maximize the Benefits of Prognostics for Wind Farms, G. Haddad, P. A. Sandborn and M. G. Pecht, Wind Energy, Vol. 17, No. 5, pp 775-791, May 2013, DOI: 10.1002/we.1610.

Lessons Learned From the 787 Dreamliner on Lithium-Ion Battery Reliability, Nicholas Williard, Wei He, Christopher Hendricks and Michael Pecht, Energies, 6(9), pp. 4682.4696, 2013.

Quantitative Analysis of Lithium-Ion Battery Capacity Prediction via Adaptive Bathtub-Shaped Function. Energies, Yi Chen, Qiang Miao, Bin Zheng, Shaomin Wu and Michael Pecht, Energies, Vol. 6, No. 6, pp. 3082-3096, 2013, DOI:10.3390/en6063082.

The effect of joint size on the creep properties of micro-scale lead-free solder joints at elevated temperatures, Limeng Yin, Song Wei, Zhangliang Xu, Yanfei Geng , Diganta Das and Michael Pecht, Journal of Materials Science: Materials in Electronics, Vol. 24, Issue 4, pp 1369-1374, April 2013, DOI:10.1007/s10854-012-0936-x.

Reliability risk mitigation of free air cooling through prognostics and health management, Jun Dai, Diganta Das, Michael Ohadi, Michael Pecht, Applied Energy, Vol. 111, pp 104-112, November 2013, DOI:10.1016/j.apenergy.2013.04.047.

Degradation Data Analysis Using Wiener Processes With Measurement Errors, Zhi-Sheng Ye, YuWang, Kwok-Leung Tsui, and Michael Pecht, IEEE Transactions On Reliability, Vol. 62, No. 4, December 2013.

Long term storage reliability of anti-fuse field programmable gate arrays, Nishad Patil, Diganta Das, Estelle Scanff and Michael Pecht, Microelectronics Reliability, Vol. 53, Issue 12, pp 2052-2056, December 2013, ISSN 0026-2714, DOI:10.1016/j.microrel.2013.06.016.

The Counterfeit Electronics Problem, Michael Pecht, Open Journal of Social Sciences, Vol. 1, No. 7, pp 12-16, DOI: 10.4236/jss.2013.17003.

Rare-Earth Elements in Lighting and Optical Applications and Their Recycling , Xin Song, Moon-Hwan Chang, Michael Pecht, The Journal of The Minerals, Metals & Materials Society, Vol. 65, Issue 10, pp 1276-1282, October 2013.

Health Monitoring of Lithium-ion Batteries, Bhanu Sood, Michael Osterman and Michael Pecht, 46th 2013 IEEE Symposium on Product Compliance Engineering (ISPCE), 7-9 October, 2013.

Thermal Cycling Reliability of Alternative Low-Silver Tin-based Solders, Elviz George, Michael Osterman, Michael Pecht, Richard Coyle, Richard Parker, and Elizabeth Benedetto, 46th International Symposium on Microelectronics, Orlando, September 30 - October 3, 2013.

Effect of ENEPIG Surface Finish on the Vibration Reliability of Solder Interconnects, Sandeep Menon, Adam Pearl, Michael Osterman, and Michael Pecht, 46th International Symposium on Microelectronics, Orlando, September 30 - October 3, 2013.

A Model for Comparing Sourcing Strategies for Parts in Long Life Cycle Products Subject to Long-Term Supply Chain Disruptions, V.J. Prabhakar and P. Sandborn, International Journal of Product Life-cycle Management, Vol. 6, No. 3, pp. 228-249, 2013.

Design for obsolescence risk management, P. Sandborn, in Proceedings of 2nd International Through-Life Engineering Services Conference, Cranfield University, November 2013.

Optimizing Part Sourcing Strategies for Low-Volume, Long Life Cycle Products Using Second Sourcing and Part Hoarding, V.J. Prabhakar, H. Allison, P. Sandborn and B. Eriksson, in Proceedings of the ASME International Design Engineering Conferences & Computers and Information in Engineering Conference, August 2013.

The Analysis and Modeling of the Obsolescence of Critical Human Skills Necessary for Supporting Legacy Systems, P. Sandborn, V. J. Prabhakar, and A. Kusimo, Proceedings COG International Conference, June 2013.

Cost Analysis of Electronic Systems, P. Sandborn, World Scientific, Singapore, 2013.

Multi-scale Modeling of Anisotropic Creep Response of Heterogeneous Single Crystal SnAgCu Solder , S.Mukherjee and A.Dasgupta, International Conference on Electronics Packaging (2013).

Vibration model of rolling element bearings in a rotor-bearing system for fault diagnosis , Feiyun Cong, Jin Chen, Guangming Dong, Michael Pecht, Journal of Sound and Vibration, Vol. 332, Issue 8, Pages 2081-2097, April 2013.

Examination of Solder Interconnects formed on ENEPIG finished Printed Wiring Boards under Drop Loading Conditions, Adam Pearl and Michael Osterman , SME 2013 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK 2013), Burlingame, CA, July 16-18, 2013.

Effect of Isothermal Aging on Microstructure and Creep Properties of SAC305 solder - A Micromechanics Approach, Preeti Chauhan, Subhasis Mukherjee, Michael Osterman, Abhijit Dasgupta, and Michael Pecht , SME 2013 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK 2013), Burlingame, CA, July 16-18, 2013.

State of charge estimation for electric vehicle batteries using unscented kalman filtering, Wei He, Nicholas Williard, Chaochao Chen and Michael Pecht, Microelectronics Reliability, Vol. 53, Issue 6, Pages 840-847, June 2013.

Remaining useful life prediction of lithium-ion battery with unscented particle filter technique, Qiang Miao, Lei Xie, Hengjuan Cui, Wei Liang and Michael Pecht, Microelectronics Reliability, Vol. 53, Issue 6, Pages 805-810, June 2013.

Prognostics for state of health estimation of lithium-ion batteries based on combination Gaussian process functional regression, Datong Liu, Jingyue Pang, Jianbao Zhou, Yu Peng and Michael Pecht, Microelectronics Reliability, Vol. 53, Issue 6, Pages 832-839, June 2013.

An ensemble model for predicting the remaining useful performance of lithium-ion batteries, Yinjiao Xing, Eden W.M. Ma, Kwok-Leung Tsui and Michael Pecht, Microelectronics Reliability, Vol. 53, Issue 6, Pages 811-820, June 2013.

Effects of thermal cycling on rare earth (Pr)-induced Sn whisker/hillock growth, Huan Ye, Songbai Xue and Michael Pecht, Materials Letters, Vol. 98, Pages 78-81, 1 May 2013.

Process-Reliability Relationships in GaN and GaAs Field Effect Transistors and HFETs, Aris Christou , Compound Semiconductor Manufacturing Technology 2013, New Orleans, LA, May 13-16, 2013.

Vibration Durability of Mixed Solder Ball Grid Array Assemblies, Sandeep Menon, Michael Osterman and Michael Pecht , Electronic Systems Technology Conference, Las Vegas, NV, May 21-23, 2013.

Investigation of Harmonic Vibration Loading on Package on Package Assemblies, Nikhil Lakhkar, Sandeep Menon and Michael Osterman , Electronic Systems Technology Conference, Las Vegas, NV, May 21-23, 2013.

Reliability Monitoring of a Separable Land Grid Array Using Time Domain Reflectometry, Michael H. Azarian, 17 th IEEE Workshop on Signal and Power Integrity (SPI2013), Paris, France, May 12-15, 2013.

Failure Mode Analysis of Electrical Double Layer Capacitors Subjected to Electrical and Thermal Stresses, Anto Peter, Michael H. Azarian, Michael Pecht, International Conference on Electronics Packaging, Osaka, Japan, April 2013.

Reliability Predictions - Continued Reliance on a Misleading Approach, Christopher Jais, Benjamin Werner and Diganta Das, Reliability and Maintainability Symposium, Orlando, Florida, 28-31 January, 2013.

Published in 2012

Back to the Top

---

The Emperor's New Clothes: Intellectual Property Protections in China, Patricia Campbell and Michael Pecht, Journal of Business & Technology Law, vol. 7, no. 1, 2012, pp. 69-116.

A Bayes Approach and Criticality Analysis for Reliability Prediction of AlGaInP Light Emitting Diodes, M. Sawant and A. Christou, Reliability of Compound Semiconductors, 2012.

Highly Accelerated Life Testing of Embedded Planar Capacitors With Epoxy-BaTiO3 Nanocomposite Dielectric , Mohammed A. Alam, Michael H. Azarian, and Michael G. Pecht, IEEE Transactions on Components, Packaging and Manufacturing Technology , Vol. 2, No. 10, October 2012.

Reliability and Failure Analysis of Lithium Ion Batteries for Electronic Systems, Nicholas Williard, Wei He, Chunsheng Wang, Michael Pecht, 2012 International Conference on Electronic Packaging Technology and High Density Packaging (ICEPT-HDP), pp. 1051-1055, August 13-16, 2012, Guilin, China, DOI:10.1109/ICEPT-HDP.2012.6474788.

Influence of Parameter Initialization on Battery Life Prediction for Online Applications, Yinjiao Xingl, Eden W. M. Ma, K-L. Tsui, Michael Pecht, Electronic Packaging Technology and High Density Packaging (ICEPT-HDP), 2012 13th International Conference on, E-ISBN:978-1-4673-1680-4, pp. 1042-1046, August 13-16, 2012, Guilin, China, DOI:10.1109/ICEPT-HDP.2012.6474786.

Impact of Dust on Printed Circuit Assembly Reliability, Bo Song, Michael H. Azarian and Michael G. Pecht, Proc. of IPC Apex Expo Conference, San Diego, CA, Feb. 2012.

Role of Prognostics in Support of Integrated Risk-based Engineering in Nuclear Power Plant Safety , P.V. Varde and Michael G. Pecht, International Journal of Prognostics and Health Management, Vol. 3, No. 1-2, pp. 59-80, 2012.

An Evaluation of the Insulation Resistance and Surface Contamination of Printed Circuit Board Assemblies, Xiaofei He, Michael H. Azarian, Mark Kostinovsky, and Michael G. Pecht, Proc. of IPC Apex Expo Conf., San Diego, CA, Feb. 2012.

A Review of PHM System's Architectural Frameworks, S. Kunche, C. Chen, and M. Pecht , MFPT 2012: The Prognostics and Health Management Solutions Conference, 24-26 April, Dayton, OH, 2012.

Diagnosis of Rolling Element Bearing Fault in Bearing-Gearbox Union System Using Wavelet Packet Correlation Analysis, Jing Tian, Michael Pecht, and Changning Li, MFPT 2012: The Prognostics and Health Management Solutions Conference, 24-26 April, Dayton, OH, 2012.

A Fusion Approach for Anomaly Detection in Hard Disk Drives, Yu Wang, KL Tsui, Eden W. M. Ma, and Michael Pecht, IEEE Prognostics & System Health Management Conference, PHM, Beijing, 2012.

Review of Offshore Wind Turbine Failures and Fault Prognostic Methods, Bill Chun Piu Lau, Eden Wai Man Ma, and Michael Pecht, IEEE Prognostics & System Health Management Conference, PHM, Beijing, 2012.

Use of Temperature as a Health Monitoring Tool for Solder Interconnect Degradation in Electronics, P. Chauhan, M. Osterman, M. Pecht, and Q. Yu IEEE Prognostics & System Health Management Conference, PHM, Beijing, 2012.

Fan Bearing Fault Diagnosis Based on Continuous Wavelet Transform and Autocorrelation, Lei Xie, Qiang Miao, Yi Chen, Wei Liang, and Michael Pecht, IEEE Prognostics & System Health Management Conference, PHM, Beijing, 2012.

Prognostics of Lithium-Ion Batteries Using Model Based and Data-Driven Methods, Chaochao Chen and Michael Pecht, IEEE Prognostics & System Health Management Conference, PHM, Beijing, 2012.

Identification of Failure Mechanisms to Enhance Prognostic Outcomes, Sony Mathew, Mohammed Alam, and Michael Pecht, Journal of Failure Analysis and Prevention, Vol. 12, Issue 1, PP. 66-73, 2012, DOI: 10.1007/s11668-011-9508-2.

A Prognostics and Health Management Strategy for Complex Electronic Systems, Bing Long, Houjun Wang, Qiang Miao, and Michael Pecht, IEEE Prognostics & System Health Management Conference, PHM, Beijing, 2012.

Lifetime Estimation of High-Power White LED using Degradation-Data-Driven Method, Jiajie Fan, Kam-Chuen Yung, and Michael Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 12, No. 2, pp. 470-477, June 2012.

Comparison of Statistical Models for the Lumen Lifetime Distribution of High Power White LEDs, Jiajie Fan, K.C.Yung, Michael Pecht, IEEE 2012 Prognostics and System Health Management Conference (PHM-2012 Beijing), Beijing , pp. 1-7, May 23-25,2012.

A novel electrostatic Radio Frequency Micro Electromechanical Systems (RF MEMS) with Prognostics function, Yunhan Huang, Michael Osterman and Michael Pecht, IEEE Electronic Components and Technology Conference (ECTC), Vol., No., pp. 121-126, May 29,2012 - June 1,2012, DOI:10.1109/ECTC.2012.6248816

Strategic Management of Component Obsolescence Using Constraint-Driven Design Refresh Planning, R. Nelson III and P. Sandborn, International Journal of Product Life-cycle Management,, Vol. 6, No. 2/2012, March 2012, DOI : 10.1504/IJPLM.2012.052656.

An Analysis of the Electronic Assembly Repair Process for Lead-Free Parts Under Combined Loading Conditions, A. Konoza, P. Sandborn, and A. Chaloupka, IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 2, No. 9, pp. 1558-1567, September 2012.

Modeling the Obsolescence of Critical Human Skills Necessary for Supporting Legacy Systems, P. Sandborn, V. J. Prabhakar, and A. Kusimo, Proceedings ASME International Design Engineering Conferences & Computers and Information in Engineering Conference, August 2012.

Strategies for the Prediction, Mitigation and Management of Product Obsolescence, B. Bartels, U. Ermel, P. Sandborn and M. Pecht, Wiley, 2012.

An Evaluation of End of Maintenance Dates for Electronic Assemblies, A. Konoza and P. Sandborn, Proceedings of the Aircraft Airworthiness & Sustainment Conference, Baltimore, MD, April 2012.

A Part Total Ownership Cost Model for Long-Life Cycle Electronic Systems, V. Prabhakar and P. Sandborn, International J. of Computer Integrated Manufacturing, Vol. 25, Nos. 4-5, pp. 384-397, 2012.

Prognostics-Based Risk Mitigation for Telecom Equipment Under Free Air Cooling Conditions, Jun Dai, Diganta Das and Michael Pecht, Applied Energy, Vol. 99, pp. 423-429, Nov. 2012.

A Canary Device Based Approach for Prognosis of Ball Grid Array Packages, S.Mathew, M.Osterman and M.Pecht, IEEE Conference on Prognostics and Health Management (PHM), Denver, CO, June 18 - 22, 2012.

Prognostics and Health Management: Utilizing the Life Cycle Knowledge to Reduce Life Cycle Cost, Diganta Das, 1stInternational Symposium on Physics and Technology of Sensors (ISPTS), pp.1, 2012.

A Critique of the IPC-9591 Standard: Performance Parameters for Air Moving Devices, H.Oh, M.Azarian, D.Das and M.Pecht, IEEE Transactions on Device and Materials Reliability, Issue 99, 2012.

Simulation Assisted Physics of Failure based Reliability Assessment, Mei-Ling Wu, Elviz George and Michael Pecht, Joint Conference of International Conference on Electronics Packaging and IMAPS All Asia Conference, Tokyo Big Sight, Tokyo, Japan, 17-20 April, 2012.

Effects of Extended Dwell Time on Thermal Fatigue Life of Ceramic Chip Resistors, Elviz George, Michael Osterman, Michael Pecht and Richard Coyle, 45th International Symposium on Microelectronics, San Diego, California, USA, 9-13 September, 2012.

Anomaly Detection for Insulated Gate Bipolar Transistor (IGBT) under Power Cycling using Principal Component Analysis and K-Nearest Neighbour Algorithm, Edwin Sutrisno, Qingguo Fan, Diganta Das and Michael Pecht, Journal of the Washington Academy of Sciences, Spring 2012.

Diagnostics and Prognostics Method for Analog Electronic Circuits, Arvind Sai Sarathi Vasan, Bing Long and Michael Pecht IEEE Transactions on Industrial Electronics, Vol. 60, 2012.

Prognostics Method for Analog Electronic Circuits, Arvind Sai Sarathi Vasan, Bing Long and Michael Pecht, Annual Conference of Prognostics and Health Management Society, 2012.

Estimation of Remaining Useful Life of Ball Bearings using Data Driven Methodologies, Edwin Sutrisno, Hyunseok Oh, Arvind Sai Sarathi Vasan and Michael Pecht, IEEE Conference on Prognostics and Health Management, 2012.

Numerical Study on the Mixing Performance of a Ring-Type Electro-osmotic Micro-mixer with Different Obstacle Configurations, Hyeon-Seok Seo, Bongtae Han and Youn-Jea Kim, Journal of Nano-science and Nanotechnology, Vol. 12, Pages 4523-4530, DOI: 10.1166/jnn.2012.6188, 2012

Design Refresh Planning Models for Managing Obsolescence, Liyu Zheng, Janis Terpenny, Peter Sandborn and Raymond Nelson III, Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Chicago, IL, USA, August 12-15, 2012.

Failure Causes of a Polymer Resettable Circuit Protection Device, S. Cheng, K. Tomb and M. Pecht, Journal of Electronic Materials, Vol. 41, No. 9, 2012, DOI: 10.1007/s11664-012-2148-9, 2012.

Evaluation of Effectiveness of Conformal Coatings as Tin Whisker Mitigation, S. Han, S. Meschter, M. Osterman and M. Pecht, Journal of Electronic Materials, DOI: 10.1007/s11664-012-2179-2, 6 July, 2012.

Accelerated Temperature and Voltage Stress Tests of Embedded Planar Capacitors With Epoxy-BaTiO3 Composite Dielectric, M. Alam, M. Azarian, M. Osterman and M. Pecht, Journal of Electronics Packaging, Vol. 134, Issue 2, June 2012.

Lifetime Estimation of High-Power White LED Using Degradation-Data-Driven Method, J. Fan, K.-Chuen Yung and M. Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 12, No. 2, pp. 470-477, June 2012.

A Two-Level Inspection Model With Technological Insertions W. Wang, M. J. Carr, T. W. S. Chow and M. Pecht, IEEE Transactions on Reliability, Vol. 61, No. 2, pp. 479-490, June 2012.

Cost Optimization for Canary-Equipped Electronic Systems in Terms of Inventory Control and Maintenance Decisions, W. Wang, Y. Liu and M. Pecht, IEEE Transactions on Reliability, Vol. 61, No. 2, pp. 323-335, June 2012.

Benefits and Challenges of System Prognostics, B. Sun, S. Zeng, R. Kang and M. Pecht, IEEE Transactions on Reliability, Vol. 61, No. 2, pp. 323-335, June 2012.

Reliability of Gull-Wing and Leadless Packages Subjected to Temperature Cycling After Rework, F. Chai, M. Osterman, and M. Pecht, IEEE Transactions on Device and Materials, 2012.

MEMS Reliability Review, Y. Huang, A. S. S. Vasan, R. Doraiswami, M. Osterman, M. Pecht, IEEE Transactions on Device and Materials, Vol 12, No. 2, Page 482 - 493, 2012.

Anomaly Detection of Polymer Resettable Circuit Protection Devices, S. Cheng, K. Tom and M. Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 12, No 2, June 2012.

Nvidia's GPU Failures: A case for Prognostics and Health Management, M. Pecht, Microelectronics Reliability, Vol. 52, Issue 6, pp. 953-957, June 2012.

Economic Design of the Mean Prognostic Distance for Canary-Equipped Electronic Systems, Wenbin Wang, Shuxin Luo, M. Pecht, Microelectronics Reliability, Vol. 52, Issue 6, pp. 1086-1091, June 2012.

Comparative Study of Metal Films and Their Affinity for Metal Whisker Growth, A. Fortier and M. Pecht, IEEE Transactions on Components, Packaging and Manufacturing Tech., Vol. 2, No. 5, pp. 739-747, May 2012.

Life Prediction of LED-Based Recess Down-light Cooled by Synthetic Jet, Liyu Zheng, Janis Terpenny, Peter Sandborn, Raymond Nelson III, Microelectronics Reliability, Vol. 52, Issue 5, Pages 937-948, DOI: 10.1016/j.microrel.2011.04.014, May 2012.

Light Emitting Diodes Reliability Review, M.H. Chang, D. Das, P. Varde, M. Pecht, Microelectronics Reliability, Vol. 52, Issue 5, Pages 762-782, May 2012, DOI:10.1016/j.microrel.2011.07.063.

Canary Approach for Monitoring BGA Interconnect Reliability Under Temperature Cycling, P. Chauhan, M. Osterman and M. Pecht, The MFPT 2012 Proceedings, 2012.

Model Based Battery Management System for Condition Based Maintenance, Nick Williard, Wei He, and M Pecht, MFPT 2012 Proceedings, 2012.

IEEE 1413: A Standard for Reliability Predictions, J. G. Elerath and M. Pecht, IEEE Transactions on Reliability, Vol. 61, No. 1, March 2012.

Embedded Capacitors in Printed Wiring Board: A Technological Review, M. Alam, M. Azarian and M. Pecht, Journal of Electronic Materials, Vol. 41, No. 8, March 2012.

Remaining Useful Life Estimation Based on a Nonlinear Diffusion Degradation Process, X. Si, W. Wang, C.Hu, D. Zhou and M. Pecht, IEEE Transactions on Reliability, Vol. 61, No. 1, March 2012.

Performance of MEMS Vibratory Gyroscopes in Harsh Environments, Chandradip Patel and Patrick McCluskey, 8th International Conference and Exhibition on Device Packaging, March 2012.

Simulation of MEMS Vibratory Gyroscope through Simulink, Chandradip Patel and Patrick McCluskey, 8th International Conference and Exhibition on Device Packaging, March 2012.

Measurements of True Leak Rates of MEMS Packages, Bongtae Han, Sensors, Vol. 12, Pages 3082-3104, DOI: 10.3390/s120303082, 6 March 2012.

Thermal Structural Modeling of Polymer Bragg Grating Waveguides Illuminated by a Light Emitting Diode, Kyoung Joon Kim, Avram Bar-Cohen, Bongtae Han, Applied Optics, Vol. 51, No. 6, Pages 726-734, 20 February 2012.

Using Cross-Validation for Model Parameter Selection of Sequential Probability Ratio Test, S. Cheng and M. Pecht, Expert Systems with Applications, 39 (2012) 8467-8473, 2012.

Novel Approach to Improve Electronics Reliability in the Next Generation of US Army Small Unmanned Ground Vehicles Under Complex Vibration Conditions , Ed Habtour, Cholmin Choi, Michael Osterman and Abhijit Dasgupta , Journal of Failure Analysis and Prevention: DOI 10.1007/s11668-011-9533-1, 2012.

A Prognostic Approach for Non-Punch Through and Field Stop IGBTs, N. Patil, D. Das, and M. Pecht, Microelectronics Reliability 52 (2012) 482-488, 2012.

Identification of Failure Mechanisms to Enhance Prognostic Outcomes, S. Mathew, M. Alam, and M. Pecht, ASM Journal of Failure Analysis and Prevention, Journal of Failure Analysis and Prevention: Vol. 12, Issue 1, Page 66-73, 2012.

Reliability of Embedded Planar Capacitors with Epoxy-BaTiO3 Composite Dielectric during Temperature-Humidity-Bias Tests, M. Alam. M. Azarian, and M. Pecht, IEEE Transactions on Device and Materials,Vol. 12, Issue 1, pp. 86 - 93, DOI (10.1109/TDMR.2011.2168527), 2012.

Prognostics of Multilayer Ceramic Capacitors Via the Parameter Residuals, Jianzhong Sun, Shunfeng Cheng, and M. Pecht, IEEE Transactions on Device and Materials, Vol. 12, Issue,1, pp. 49-57, 2012.

Effects of Moisture Absorption on the Electrical Parameters of Embedded Capacitors with Epoxy-BaTiO3 Nano-composite Dielectric, M. Alam. M. Azarian, and M. Pecht, Journal of Materials Science: Materials in Electronics, Vol. 23, No. 8, pp. 1504-1510, Jan. 2012.

Published in 2011

Back to the Top

---

Failure Modes and Effects Criticality Analysis (FMECA) of AlGaN/GaN Based Microwave Device Degradation Mechanisms , Zahra Mohagegh, Mohammed Modarres, and Aris Christou, CS Mantech Conference, May 16-19, 2011, Palm Springs, CA.

Physics-Based Common Cause Failure Modeling in Probabilistic Risk Analysis: A Mechanistic Perspective, Zahra Mohagegh, Mohammed Modarres, and Aris Christou, Proceedings of the ASME 2011 Power Conference, , July 12-14, 2011, Denver, CO.

Nondestructive Sensing of Interconnect Failure Mechanisms Using Time-Domain Reflectometry , Daeil Kwon, Michael H. Azarian, and Michael Pecht, IEEE Sensors Journal, Vol. 11, No. 5, pp. 1236-1241, May, 2011.

Temperature and Voltage Aging Effects on Electrical Conduction Mechanism in Epoxy-BaTiO3 , Mohammed A. Alam, Michael H. Azarian, Michael Osterman, and Michael Pecht, Microelectronics Reliability, Vol. 51, pp. 946-952, 2011.

A Real Options Optimization Model to Meet Availability Requirements for Offshore Wind Turbines, Michael Pecht, Gilbert Haddad, and Peter Sandborn, 2011.

PHM Enabled Logistics PHM Enabled Logistics (Return on Investment and Availability Management), Peter Sandborn, 2011 PHM Conference Shenzhen, May 24, 2011.

Guaranteeing High Availability of Wind Turbines, Michael Pecht, G. Haddad, P.A. Sandborn, T. Jazouli, B. Foucher, and V. Rouet, Advances in Safety, Reliability and Risk Management, Aug 2011.

Prognostics of Polymer Positive Temperature Coefficient Resettable Fuses, Michael Pecht, Shunfeng Cheng, and Kwok Tom, MFPT: The Applied Systems Health Management Conference 2011, Virginia Beach, Virginia, 10-12 May 2011.

Controlling Moisture in Printed Circuit Boards , Bhanu Sood and Michael Pecht, IPC Printed Circuit Expo, April 10-14, 2011, Las Vegas, NV.

Using PHM to Meet Availability-Based Contracting Requirements, Taoufik Jazouli and Peter Sandborn, 2011 IEEE Conference on Prognostics and Health Management, 20-23 June, 2011.

Rolling Element Bearing Fault Feature Extraction Using EMD-Based Independent Component Analysis, Michael Pecht, C.H. Wu, C.H. Yang, S.C. Lo, N. Vichare, and E. Rhem, 2011 IEEE Conference on Prognostics and Health Management, 20-23 June, 2011.

Remaining Useful Performance Analysis of Batteries, Michael Pecht, Wei He, Nicholas Williard, and Michael Osterman, 2011 IEEE Conference on Prognostics and Health Management, 20-23 June, 2011.

Prognostics and Health Management's Potential Benefits to Warranty, Michael Pecht, Yan Ning, and Peter Rundle, The Seventh Annual Warranty Chain Management Conference, San Diego, CA, 15-17 March, 2011.

Determining a Dynamic Maintenance Threshold Using Maintenance Options, Michael Pecht, Peter Sandborn, and Gilbert Haddad, World Congress on Engineering Asset Management, Cincinnati, OH, Oct. 2011.

Applications of Health Monitoring to Wind Turbines, Michael Pecht, Michael H. Azarian, Ranjith S.R. Kumar, Nishad Patil, and Anshul Shrivastava, Proceeding of the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management, Stavanger, Norway, 30 May - 1 June, 2011.

Complex System Maintainability Verification with Limited Samples, Michael Pecht, QiangMiao, Liu Liu, and YuanFeng, Microelectronics Reliability, Vol. 51, Issue 2, PP. 294-299, Feb 2011.

Optimization of PHM System for Electronic Assemblies Using Maintenance Aware Design Environment Software, Sandeep Menon, Chris Stecki, Jiaqi Song and Michael Pecht, AIAC14 Fourteenth Australian International Aerospace Congress.

A Prognostics and Health Management Roadmap for Information and Electronics- Rich Systems Michael Pecht, IEICE Fundamentals Review Vol.3 No. 4, August 2011.

Analysis of Electrochemical Migration Kinetics Using Electrochemical Impedance Spectroscopy, Xiaofei He, Michael H. Azarian, Chunsheng Wang and Michael G. Pecht, Proc. of IPC Apex Expo Conference, Las Vegas, NV, April 12-14, 2011.

Evaluation of Electrochemical Migration on Printed Circuit Boards with Lead-Free and Tin-Lead Solder, Xiaofei He, Michael H. Azarian and Michael G. Pecht, Journal of Electronic Materials, Vol. 40, No.9, 2011, DOI:10.1007/s11664-011-1672-3.

Return on Investment of a LED Lighting System, Yuchen Li, Michael Pecht, Shunong Zhang and Rui Kang, Prognostics and System Health Management Conference 2011, Shenzhen, China, pp. 1-5, May 24-25, 2011, DOI:10.1109/PHM.2011.5939555.

Prognostics and health monitoring for lithium-ion battery, Yinjiao Xing, Qiang Miao, K.-L. Tsui and Michael Pecht, IEEE International Conference on Intelligence and Security Informatics (ISI), 2011, Vol., No., pp.242-247, July 10-12, 2011, DOI:10.1109/ISI.2011.5984090.

Economic Analysis of Canary-Based Prognostics and Health Management, Wenbin Wang and Michael Pecht, IEEE Transactions on Industrial Electronics, Vol. 58, No. 7, pp. 3077 - 3089, July 2011, DOI:10.1109/TIE.2010.2072897.

Temperature Cycling Reliability of High-Temperature Lead-Free Die-Attach Technologies, Pedro O. Quintero and F. Patrick McCluskey, IEEE Transactions on Device and Materials Reliability, Vol. 11, No. 4, Pages 531 - 539, December 2011, DOI:10.1109/TDMR.2011.2140114.

The Effect of Physical Dimensions of an Embeded Planar Capacitor on Reliability, M. Alam, M. Azarian and M.Pecht, SMTA International, Fort Worth, TX, 2011.

Prognostics of Systems: Approaches and Applications, S.Mathew and M.Pecht, Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011), Norway, May 31- June 2, 2011.

Failure Modes, Mechanisms, and Effects Analysis for LED Backlight Systems used in LCD TV's, J. Fan, K.C. Yung and M. Pecht, Prognostics and System Health Management Conference 2011, pp.1-5, Shenzhen, China, May 24-25, 2011.

Physics of Failure Based Reliability Assessment of Electronic Hardware, Sandeep Menon, Elviz George, Michael Osterman and Michael Pecht, 6th Annual World Congress on Engineering Asset Management, Cincinnati, Ohio, USA, 2-5 October, 2011.

Simultaneous Measurement of Effective Chemical Shrinkage and Modulus Evolutions During Polymerization, Y. Wang, L. Woodworth, B. Han, Experimental Mechanics, Vol. 51, Pages 1155-1169, DOI: 10.1007/s11340-010-9410-y, 2011.

Prognostics of Failures in Embedded Planar Capacitors using Model-based and Data-Driven Approaches, Alam M., M.H. Azarian, M. Osterman, and M. Pecht, Journal of Intelligent Material Systems and Structures, Vol. 22, pp. 1293-1304, Aug. 2011.

A Part Total Ownership Cost Model for Long-Life Cycle Electronic Systems, V. Prabhakar and P. Sandborn, International Journal of Computer Integrated Manufacturing, Vol. 24, 2011.

Part Sourcing Decisions of Long Life Cycle Products, V. Prabhakar and P. Sandborn, ASME International Design Engineering Conferences & Computers and Information in Engineering Conference, Washington DC, 2011.

Strategic Management of Component Obsolescence Using Constraint-Driven Design Refresh Planning, R. Nelson III and P. Sandborn, ASME International Design Engineering Conferences & Computers and Information in Engineering Conference,Washington DC, 2011.

The Evaluation of End-of-Repair/End-of-Maintenance Dates for Electronic Assemblies, P. Sandborn, A. Konoza, R. Nelson III, D. Gerdes, and M. Shamet, Proceedings DMSMS Conference, Hollywood, FL, August 2011.

Disposable Electronics in Military and Avionics Systems, P. Sandborn, A. Wilson, and T. Jazouli, Proceedings DMSMS Conference, Hollywood, FL, August 2011.

Research on Features for Diagnostics of Filtered Analog Circuits Based on LS-SVM, Bing Long, Shulin Tian, Qiang Miao, and M. Pecht, IEEE, 2011.

A Health Indicator Method for Degradation Detection of Electronic Products, S. Kumar, N. M. Vichare, E. Dolev, and M. Pecht, Microelectronics Reliability, 52 (2012) 439-445, 2011.

Prognostics of lithium-ion batteries based on Dempster Shafer theory and the Bayesian Monte Carlo method, W.He, N. Williard, M. Osterman, M. Pecht, Journal of Power Sources 196 (2011) 10314-10321, 2011.

Disassembly methodology for conducting failure analysis on lithium-ion batteries, N. Williard, B. Sood, M. Osterman, and M. Pecht, Journal of Material Sciences: Material Electron (2011) 22:1616-1630, 2011.

Battery Management Systems in Electric and Hybrid Vehicles,Yinjiao Xing, Eden W. M. Ma, Kwok L. Tsui and M. Pecht, Energies 2011, 4, 1840-1857; DOI:10.3390/en4111840, Oct. 2011.

Experimental Validation of LS-SVM Based Fault Identification in Analog Circuits Using Frequency Features, A. Vasan, B. Long, and M. Pecht, World Congress on Engineering Asset Management, 2011, 6th Annual Conference, Cincinnati, Ohio, Oct. 2011.

Investigation of Stochastic Differential Models and a Recursive Nonlinear Filtering Approach for Fusion-Prognostics, A. Vasan and M. Pecht, Annual Conference of the Prognostics and Health Management Society, Montreal, Quebec, Sept. 2011.

Corrosion of ImAg-Finished PCBs Subjected to Elemental Sulfur Environments, S. Zhang, R. Kang, and M. Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 11, No. 3, pp. 391-400, September 2011.

Physics-of-Failure-Based Prognostics and Health Management for High-Power White Light-Emitting Diode Lighting, J. Fan, K. C. Yung, and M. Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 11, No. 3, pp. 407-416, September 2011.

Screening for Counterfeit Electronic Parts, B. Sood, D. Das and M. Pecht, Journal of Materials Science: Materials in Electronics, Vol. 22, No. 10, pp. 1511-1522, 2011.

Influence of Molding Compound on Leakage Current in MOS Transistors, M. Alam, D. Das, M. Azarian, B. Sood, and M. Pecht, IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 1, No. 7, pp.1054-1063, July 2011.

Considerations in the Use of the Laser Flash Method for Thermal Measurements of Thermal Interface Materials, Khuu, V., Osterman, M., Bar-Cohen, A., Pecht, M., IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 1, No. 7, pp.1015-1028, July 2011.

Identification of Multiple Characteristic Components with High Accuracy and Resolution using the Zoom Interpolated Discrete Fourier Transform, Q. Miao, L. Cong and M. Pecht, Measurement Science and Technology, No. 22, pp. 1-12, 2011.

Tin Whisker Analysis of Toyota's Electronic Throttle Controls, B. Sood, M. Osterman and M. Pecht, Circuit World, Vol. 37, No. 3, pp. 4-9, 2011.

Prognostics of Failures in Embedded Planar Capacitors using Model-Based and Data-Driven Approaches, M. Alam, M. Azarian, M. Osterman, and M. Pecht, Journal of Intelligent Material Systems and Structures, August 2011.

Forecasting Technology Procurement Lifetimes for Use in Managing DMSMS Obsolescence, P. Sandborn, V. Prabhakar and O. Ahmad, Microelectronics Reliability, Vol. 51, pp. 392-399, 2011.

Using Failure Modes, Mechanisms, and Effects Analysis in Medical Device Adverse Event Investigations, S. Cheng, D. Das, and M. Pecht, ICBO: International Conference on Biomedical Ontology, Buffalo, NY, July 26-30, pp. 340-345, 2011.

Guaranteeing High Availability of Wind Turbines, G. Haddad, P.A. Sandborn, T. Jazouli, M. Pecht, B. Foucher, and V. Rouet, 2011 ESREL Conference, Troyes, France, September 18-22, 2011.

Thermal Cycling Reliability of Lead-Free Solders (SAC305 and Sn3.5Ag) for High-Temperature Applications, E. George, D. Das, M. Osterman, and M. Pecht, Device and Materials Reliability, IEEE Transactions on , vol.11, no.2, pp.328-338, June 2011.

Method for Valuating Options Arising in PHM, G. Haddad, P. Sandborn, and M. Pecht, 2011 IEEE International Conference on Prognostics and Health Management, Denver, CO, June 20-23, 2011.

Using Real Options to Manage Condition-Based Maintenance Enabled by PHM, G. Haddad, P. Sandborn, and M. Pecht, 2011 IEEE International Conference on Prognostics and Health Management, Denver, Colorado, June 20-23, 2011 .

Junction Temperature Characterization of High Power Light Emitting Diodes, M. Chang, D. Das, and M. Pecht, IMAPS Mid-Atlantic Microelectronics Conference 2011, Atlantic City, New Jersey,June 23-24, 2011.

Cooling Fan Bearing Fault Identification Using Vibration Measurement, Q. Miao, M. Azarian, and M. Pecht, IEEE: International Prognostics and Health Management Conference, Denver CO, 21st to 23rd June 2011.

Rolling Element Bearing Fault Feature Extraction Using EMD-Based Independent Component Analysis, Q. Miao, D. Wang, and M. Pecht, IEEE: International Prognostics and Health Management Conference, Denver CO, June 21-23, 2011.

Remaining Useful Performance Analysis of Batteries, W. He, N. Williard, M. Osterman, and M. Pecht, IEEE: International Prognostics and Health Management Conference, Denver CO, June 21-23, 2011.

Using PHM to Meet Availability-Based Contracting Requirements,T. Jazouli and P. Sandborn, IEEE: International Prognostics and Health Management Conference, Denver CO, 21st to 23rd June 21-23, 2011.

Thermal Cycling Ramifications of Lead-Free Solder on the Electronic Assembly Repair Process, A. Chaloupka, P. Sandborn, A. Konoza, Components, Packaging and Manufacturing Technology, IEEE Transactions on , vol.1, no.6, pp.964-974, June 2011.

Assessment of Solder Dipping as a Tin Whisker Mitigation Strategy, S. Mathew, W. Wang, M.Osterman and M. Pecht,Components, Packaging and Manufacturing Technology, IEEE Trans. on , Vol. 1, No. 6, pp. 957-963, June 2011.

Ontology-Based Knowledge Representation for Product Life-Cycle Concepts and Obsolescence Forecasting, L. Zheng, R. Nelson, III, J. Terpenny, P. Sandborn, Proceedings of Industrial Engineering Research Conference, Reno, NV, May 2011.

Estimation Of Fan Bearing Degradation Using Acoustic Emission Analysis And Mahalonabis Distance, H. Oh, M. Azarian, and M. Pecht, MFPT: The Applied Systems Health Management Conference 2011, Virginia Beach, Virginia, May 10-12, 2011.

Risks To Telecommunication Equipment Under Free Air Cooling Conditions And Their Mitigation, J. Dai, D. Das, and M. Pecht, MFPT: The Applied Systems Health Management Conference 2011, Virginia Beach, Virginia, May 10-12, 2011.

A Real Options Optimization Model To Meet Availability Requirements For Offshore Wind Turbines, G. Haddad, P. Sandborn, and M. Pecht, MFPT: The Applied Systems Health Management Conference 2011, Virginia Beach, Virginia, May 10-12, 2011.

Identification Of Failure Mechanisms To Enhance Prognostic Outcomes, S. Mathew, M. Alam, and M. Pecht, MFPT: The Applied Systems Health Management Conference 2011, Virginia Beach, Virginia, May 10-12, 2011.

Prognostics for Polymer Positive Temperature Coefficient Resettable Fuses, S. Cheng, K. Tom, and M. Pecht, MFPT: The Applied Systems Health Management Conference 2011, Virginia Beach, Virginia, May 10-12, 2011.

Solder Joint Reliability of SnAgCu Solder Refinished Components Under Temperature Cycling Test, W. Wang, M. Osterman, D. Das, M. Pecht, Components, Packaging and Manufacturing Technology, IEEE Transactions on , vol.1, no.5, pp.798-808, May 2011.

Effectiveness of Conformal Coatings on Surface Mount Components as Tin Whisker Mitigation, S. Han, C. Johnson, M. Osterman, M. Pecht, IMAPS Advanced Technology Workshop on High Reliability Microelectronics for Military Applications, Linthicum Heights, MD, May 17-19, 2011.

Likelihood of Metal Vapor Arc by Tin Whiskers, S. Han, M. Osterman, M. Pecht, IMAPS Advanced Technology Workshop on High Reliability Microelectronics for Military Applications, Linthicum Heights, MD, May 17-19, 2011.

Thermal Cycling Reliability of Sn96.5Ag3.0Cu0.5 Solder Assembled with ENIG and OSP Pad Finishes, P. Chauhan, M. Osterman and M. Pecht, IMAPS Advanced Technology Workshop on High Reliability Microelectronics for Military Applications, Linthicum Heights, MD, May 17-19, 2011.

CLCC Solder Joint Life Prediction under Complex Temperature Cycling Loading, F. Chai, M. Osterman, M. Pecht, IMAPS Advanced Technology Workshop on High Reliability Microelectronics for Military Applications, Linthicum Heights, MD, May 17-19, 2011.

Reliability Design of Residential Sized Refrigerators Subjected to Repetitive Random Vibration Loads during Rail Transport, S. Woo, D. L. O’Neal, M. Pecht, Engineering Failure Analysis 18 (2011) 1322–1332, 2011.

Prognostics of Lithium-ion Batteries using Extended Kalman Filtering, W. He, N. Williard, M. Osterman, and M. Pecht, IMAPS Advanced Technology Workshop on High Reliability Microelectronics for Military Applications, Linthicum Heights, MD, May 17-19, 2011.

Failure Mechanisms in Embedded Planar Capacitors during High Temperature Operating Life (HTOL) Testing, M. A. Alam, M. Azarian, M. Osterman, and M. Pecht, IPC APEX EXPO, Las Vegas, NV, 2011.

Early Detection of Avalanche Breakdown in Embedded Planar Capacitors using SPRT, M. A. Alam, M. Azarian, M. Osterman, and M. Pecht, MFPT, Virginia Beach, VA, 2011.

Embedded 3D BioMEMS for multiplexed label-free detection, S. Arvind, R. Doraiswami and M. Pecht, Proceedings of the 61st Electronic Components and Technology Conference, Orlando, FL, June 1- 3, 2011.

Point-of-care Bio-sensor System, S. Arvind, R. Doraiswami, D. Mahadeo, Y. Huang and M. Pecht, Frontiers in Bioscience, 2011.

Predicting Remaining Capacity of Batteries for UAVs and Electric Vehicle Applications, N. Williard, W. He, M. Osterman, M. Pecht, IMAPS Advanced Technology Workshop on High Reliability Microelectronics for Military Applications, Linthicum Heights, MD, May 17-19, 2011.

Modeling Temperature Cycle Fatigue Life of SN100C Solder, M. Osterman, 2011 SMTA International Conference on Soldering and Reliability, Toronto Canada, May 3-4, 2011.

Non-Destructive Sensing of Interconnect Failure Mechanisms Using Time Domain Reflectometry, D. Kwon, M. H. Azarian, and M. Pecht, IEEE Sensors J., Vol. 11, No. 5, pp. 1236-1241, May 2011.

Temperature and voltage ageing effects on electrical conduction mechanism in epoxy-BaTiO3 composite dielectric used in embedded capacitors, M. Alam, M. Azarian, M. Osterman, M. Pecht, Microelectronics Reliability, Vol. 51, No. 5, pp. 946-952, May 2011.

Prognostics-based Health Management for Telecom Equipment under Free Air Cooling, J. Dai, D. Das, and M. Pecht, EUROCON 2011, Lisbon, Portugal, April 27-29, 2011.

Screening for Counterfeit Electronic Parts, B. Sood and D. Das, 2011 IPC APEX EXPO, Las Vegas, Nevada, April 10-14, 2011.

Software Reliability Analysis of Laptop Computers, W. Wang and M. Pecht, Proceedings of 7th IMA Conference for Modeling Industrial Maintenance and Reliability, Cambridge, UK., April 18-20, 2011.

Reduction of Motion Artefacts In Electrocardiogram Monitoring Using an Optical Sensor,Y. Liu and M. Pecht, Biomedical Instrumentation & Technology, Vol. 45, No. 2, pp. 155-163, March 2011.

Identification of Multiple Characteristic Components with High Accuracy and Resolution Using the Zoom Interpolated Discrete Fourier Transform, Q. Miao, L. Cong and M. Pecht, Measurement Science and Technology, Vol. 22 (2011) 055701 (12pp), 2011.

Effect of Moisture on Thermal Properties of Halogen-free and Halogenated Printed Circuit Board Laminates, L. Ma, B. Sood, and M. Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 11, No. 1, pp. 66-75, March 2011.

Electrostatic Monitoring of Gas Path Debris for Aero-engines, Z. Wen, H. Zuo, and M. Pecht, IEEE Transactions on Reliability, Vol. 60, No. 1, pp. 33-40, March 2011.

Health Monitoring of Electronic Products Based on Mahalanobis Distance and Weibull Decision Metrics, G. Niu, S. Singh, S.W. Holland, and M. Pecht, Microelectronics Reliability, Vol. 51, Issue 2, pp. 279-284, Feb 2011.

 

Published in 2010

Back to the Top

A Prognostics and Health Management for Information and Electronics-Rich Systems, Michael Pecht, Journal of Japan Institute of Electronics Packaging, Vol. 13 No. 7, 2010.

A Verification of Application Specific Component Qualification, Vidyu Challa, Shilin Liu, Qiang Yu, and Michael Pecht, 2010 11th International Conference on Electronic Packaging Technology & High Density Packaging (ICEPT-HDP), pp 1265 - 1268, Aug 2010, DOI: 10.1109/ICEPT.2010.5582783.

Anomaly Detection of Non Punch Through Insulated Gate Bipolar Transistors (IGBT) by Robust Covariance Estimation Techniques, Nishad Patil, Sandeep Menon, Diganta Das and Michael Pecht 2010 second International Conference on Reliability, Safety & Hazard (ICRESH-201O).

Evaluation Of Robust Covariance Estimation Techniques For Anomaly Detection Of Insulated Gate Bipolar Transistors (IGBT), Nishad Patil, Sandeep Menon, Diganta Das and Michael Pecht Proceedings of the ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS2010 September 28 - October 1, 2010, Philadelphia, Pennsylvania, USA.

An investigation into a low insulation resistance failure of multilayer ceramic capacitors, Anshul Shrivastava, Bhanu Sood, Michael Azarian, Michael Osterman and Michael Pecht, IEEE Electronic Components and Technology Conference (ECTC), 2010 Proceedings, Vol., No., pp 1811-1815, June 1-4,2010, DOI: 10.1109/ECTC.2010.5490718.

A Study of the Effect of Solder Mask on Electrochemical Migration of Printed Circuit Board, Xiaofei He, Michael H. Azarian and Michael G. Pecht, Proc. of IPC Apex Conf. Las Vegas, April 2010.

Hierarchical Life Prediction Model for Actively Cooled LED-Based Luminaire, Bong-Min Song, Bongtae Han, Avram Bar-Cohen, Rajdeep Sharma, and Mehmet Arik, IEEE Transactions on Components and Packaging Technologies, Vol. 33, No. 4, Pages 728-737, December 2010.

Comprehensive Moisture Diffusion Characteristics of Epoxy Molding Compounds over Solder Reflow Process Temperature, Changsoo Jang, Bongtae Han, and Samson Yoon, IEEE Transactions on Components and Packaging Technologies, Vol. 33, No. 4, Pages 809-818, December 2010.

Direct Submount Cooling of High-Power LEDs, Dae-Whan Kim, Emil Rahim, Avram Bar-Cohen and Bongtae Han, IEEE Transactions on Components and Packaging Technologies, Vol. 33, No. 4, Pages 698-712, December 2010.

Coupled Thermal and Thermo-Mechanical Design Assessment of High Power Light Emitting Diode, Bongtae Han, Changsoo Jang, Avram Bar-Cohen and Bongmin Song, IEEE Transactions on Components and Packaging Technologies, Vol. 33, No. 4, Pages 688-697, December 2010.

Development of a High-Lumen Solid State Down Light Application, Mehmet Arik, Jennifer Jackson, Yogen Utturkar, Rajdeep Sharma, Charles Seeley, Satish Prabhakaran, Stan Weaver, Bongtae Han and Glenn Kuenzler, IEEE Transactions on Components and Packaging Technologies, Vol. 33, No. 4, Pages 668-679, December 2010.

Modified Coupled-Mode Model For Thermally Chirped Polymer Bragg Gratings, Ilai Sher, Bongtae Han, Avram Bar-Cohen, Applied Optics, Vol. 49, No. 11, Pages 2079-2084, 10 April 2010.

Nano-Pattern Recognition and Correlation Technique for Sub-Nano-meter In-Plane Displacement Measurement, H. Bi, C. Jang, B. Han, Experimental Mechanics, Vol. 50, Pages 1169-1181, DOI: 10.1007/s11340-010-9332-8, 2010.

Recent Applications of Moir¨¦ Interferometry, P.G. Ifju, B. Han, Experimental Mechanics, Vol. 50, Pages 1129-1147, DOI: 10.1007/s11340-010-9404-9, 2010.

Micro-structural Analysis of Reballed Tin-Lead, Lead-Free, and Mixed Ball Grid Array Assemblies Under Temperature Cycling Test, L. Nie, M. Mueller, M. Osterman, and M. Pecht, Journal of Electronic Materials, Vol. 39, No. 8, 2010.

A Multi-component and Multi-failure Mode Inspection Model Based on the Delay Time Concept, W. Wang, D. Banjevic and M. Pecht, Reliability Engineering and System Safety, No. 95, pp. 912–920, 2010.

A Design for Availability Approach for Use with PHM, T. Jazouli and P. Sandborn, Proceedings of the International Conference on Prognostics and Health Management, Portland, OR, October 2010.

Forward-stepwise Regression Analysis for Fine Leak Batch Testing of Multiple MEMS Package, C. Jang, B. Youn, P. F. Wang. B. Han and S.-J. Ham, Microelectronics Reliability, Vol. 18, No. 3, pp. 577-587, 2010.

The Use of “Canaries” for Adaptive Health Management of Electronic Systems, A. Dasgupta, R. Doraiswami, M. Azarian, M. Osterman, S. Mathew, and M. Pecht, ADAPTIVE 2010, IARIA Conference, Lisbon Portugal, Nov 21-26, 2010.

Viscoplastic Creep Response and Microstructure of As- fabricated Micro-scale Sn3.0Ag0.5Cu Solder Interconnects, G. Cuddalorepatta, M. Williams, and A. Dasgupta, Journal of Electronic Materials, Vol. 39, No.10, pp. 2292-2309, 2010.

Multi-scale Modeling of the Viscoplastic Response of As-fabricated Micro-scale Pb-free Sn3.0Ag0.5Cu Solder Interconnects, G. Cuddalorepatta and A. Dasgupta, Acta Materialia, Vol. 58, No. 18, pp. 5989-6001, 2010.

Durability of Pb-free Solder Between Copper Interconnect and Silicon in Photovoltaic Cells, G. Cuddalorepatta, D.A., et. al, Progress in Photovoltaics: Research and Applications, No. 18, pp.168–182, 2010.

Methodology for Analysis of Schottky Diode Failures, B. Sood, J. Miker, T. Wanek, and M. Pecht, Proceedings from the 36th International Symposium for Testing and Failure Analysis, Addison, Texas, USA, November 14–18, 2010.

Calculating the Return on Investment for DMSMS Management (Presentation), P. Sandborn, Proceedings DMSMS Conference, Las Vegas, NV, October 2010.

A Probabilistic Description Scheme for Rotating Machinery Health Evaluation, Q. Miao, D. Wang and M. Pecht, Journal of Mechanical Science and Technology Vol. 24, No. 12 pp. 2421-2430, 2010.

Design for Reliability of Refrigerator Components Subject to Repetitive Loads in Use, S. Woo, D. O'Neal, M. Pecht and H. Kim, Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, Vancouver, British Columbia, Canada, November 12-18, 2010.

Prognostics and Health Assessment Implementation for Electronic Products, J. Gu and M. Pecht, Journal of the IEST, Vol. 53, No. 1, pp. 44 - 58, April 2010.

Bio-compatible Polymer Composite Material for Highly Sensitive Point-of-care BioMEMS Micro-cantilever Sensors, S. Arvind, R. Doraiswami and M. Pecht, Proceedings of the 2010 SMTA International Conference and Exhibition, Orlando, FL, October 24-28, 2010.

Thermal Cycling Reliability of Package on Packages Assembled by One-Pass and Two-Pass Techniques, N. Williard, P. Chauhan, V. Srinivas, M. Osterman, M. Pecht and R. Farrell, Proceedings of the 2010 SMTA International Conference and Exhibition, Orlando, FL, October 24-28, 2010.

Modeling Approaches for Prognostics and Health Management of Electronics, S. Kumar and M. Pecht, International Journal of Performability Engineering, Vol. 6, No. 5, pp. 467-476, September 2010.

Prognostics of Embedded Planar Capacitors Under Temperature and Voltage Aging, M. Alam, M. Azarian, M. Osterman, and M. Pecht, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Philadelphia, PA, 2010.

Failure Precursors for Polymer Resettable Fuses, S. Cheng, K. Tom and M. Pecht, IEEE Transactions on Devices and Materials Reliability, Vol. 10, Issue. 3, pp.374-380, 2010. 

Analytical and Molecular Simulation Study of Water Condensation Behaviour in Mesopores with Closed Ends, C. Jang and B. Han, The Journal of Chemical Physics, Vol. 132, 104702, 2010.

Impact of Thermal Aging on the Thermal Fatigue Durability and Interfacial Intermetallic Compounds Thickness in Pb-free Solder Joints, P. Chauhan, M. Mueller, M. Osterman and M. Pecht, Electronics Systems Integration Conferences (ESTC), Sept. 2010.

Solder Joint Reliability of SnBi Finished TSOPs with Alloy 42 Lead-frame under Temperature Cycling, W. Wang, M. Osterman, D. Das and M. Pecht, Journal of ASTM International (JAI), Vol. 7, Issue 8, September 2010.

Computer Manufacturing Management Integrating Lean Six Sigma and Prognostic Health Management, G. Niu, D. Lau and M. Pecht, International Journal of Performability Engineering, Vol. 6, No. 5, pp. 453-466, September 2010.

Prognostics of Interconnect Degradation using RF Impedance Monitoring and Sequential Probability Ratio Test, D. Kwon, M. Azarian and M. Pecht, International Journal of Performability Engineering, Vol. 6, No. 5, pp. 443-452, September 2010.

Application of Grey Prediction Model for Failure Prognostics of Electronics, J. Gu, N. Vichare, B. Ayyub and M. Pecht, International Journal of Performability Engineering, Vol. 6, No. 5, pp. 435-442, September 2010.

Approach to Fault Identification for Electronic Products Using Mahalanobis Distance, S. Kumar, T.W.S. Chow and M. Pecht, IEEE Transactions on Instrumentation and Measurement, Vol. 59, No. 8, pp. 2055-2064, August 2010.

Validation of Reliability Capability Evaluation Model Using a Quantitative Assessment Process, S. Tiku and M. Pecht, International Journal of Quality & Reliability Management, Vol. 27, No. 8, pp. 938-952, 2010.

A Prognostics and Health Management Roadmap for Information and Electronics-Rich Systems, M. Pecht, IEICE Fundamentals Review, Vol. 3, No. 4, pp. 25-32, 2010.

Automatic Data Mining for Telemetry Database of Computer Systems, C.-H. Wu, C.-H. Yang, S.-C. Lo, N. Vichare, E. Rhem, M. Pecht, Microelectronics Reliability, Vol. 51, PP. 263-269, October, 2010.

Concerns with Interconnect Reliability Assessment of High Power Light Emitting Diodes (LEDs), M. -H. Chang, D. Das, S. W. Lee and M. Pecht, SMTA China South Technical Conference 2010, Shenzhen, China, pp. 63-69, Aug. 31st - Sep. 2nd, 2010.

Mahalanobis Distance Approach to Field Stop IGBT Diagnostics, N. Patil, D. Das and M. Pecht, Proceedings of the 10th International Seminar on Power Semiconductors, Prague, pp.79-84, 1-3 September 2010.

Mahalanobis Distance Approach for Insulated Gate Bipolar Transistor (IGBT) Diagnostics, N. Patil, D. Das and M. Pecht, Proceedings of the 17th International Conference on Concurrent Engineering, Cracow, pp.583-591, 6-10 September 2010.

Effect of Environmental Stress and Bias Conditions on Reliability of Embedded Planar Capacitors, M. Alam, M. Azarian, M. Osterman and M. Pecht, IPC APEX EXPO, Las Vegas, NV, 2010.

Effectiveness of Embedded Capacitors in Reducing the Number of Surface Mount Capacitors for Decoupling Applications, M. Alam, M. Azarian, M. Osterman and M. Pecht, Circuit World, Vol. 36, No. 1, pp. 22-30, 2010.

Electrical Shorting Propensity of Tin Whiskers, S. Han, M. Osterman and M. Pecht, IEEE Transactions on Electronics Packaging Manufacturing, Vol. 33, No. 3, July 2010.

Measurement of the Hygroscopic Swelling Coefficient of Thin Film Polymers Used in Semiconductor Packaging, C. Jang, S. Yoon and B. Han, IEEE Transactions on Components and Packaging Technologies, Vol. 33, No. 2, pp. 340-346, June 2010.

Harmonic and Random Vibration Durability of SAC305 and Sn37Pb Solder Alloys, Y. Zhou, M. Al-Bassyiouni and A. Dasgupta, IEEE Transactions on Components and Packaging Technologies, Vol. 33, No. 2, pp. 319-328, June 2010.

Micro-structural Analysis of Reworked Ball Grid Array Assemblies Under Thermomechanical Loading Conditions, L. Nie, M. Osterman and M. Pecht, IEEE Trans. on Device and Materials Reliability, Vol. 10, No. 2, pp. 276-286, June 2010.

Anomaly Detection through a Bayesian Support Vector Machine, V. Sotiris, P.W. Tse and M. Pecht, IEEE Trans. on Reliability, Vol. 59, No. 2, pp. 277-286, June 2010.

Coupled Thermal-stress Analysis for FC-BGA Packaging Reliability Design, Hirohata, K., K. Hisano, M. Mukai, H. Aoki, C. Takubo, T. Kawakami and M. Pecht, IEEE Trans. on Components and Packaging Technologies, Vol. 33, No. 2, pp. 347-358, June 2010.

Board Level Reliability Evaluation of Low Silver (Ag) Content Lead-free Solder Joints at Low Strain Rates, V. Srinivas, N. Williard, P. Chauhan and M. Osterman, SMTA International Conference on Solder Reliability, May 2010.

Degradation of Digital Signal Characteristics Due to Intermediate Stages of Interconnect Failure, D. Kwon, M. H. Azarian and M. Pecht, Fourteenth IEEE Workshop on Signal Propagation on Interconnects, Hildesheim, Germany, May 9-12, 2010.

Sensor Systems for Prognostics and Health Management, S. Cheng, M. Azarian and M. Pecht, Sensors, No. 10, pp.5774-5797, 2010.

Comparison of Printed Circuit Board Property Variations in Response to Simulated Lead-Free Soldering, B. Sood, R. Sanapala, D. Das, M. Pecht, C. Huang and M. Tsai, IEEE Transactions on Electronics Packaging Manufacturing, Vol. 33, No. 2, pp. 98-111, April 2010.

A Wireless Sensor System for Prognostics and Health Management, S. Cheng, K. Tom, L. Thomas and M. Pecht, IEEE Sensors Journal, Vol. 10, Issue 4, pp. 856 – 862, 2010.

Effects of Moisture Content on Dielectric Constant and Dissipation Factor of Printed Circuit Board Materials, L. Ma, B. Sood and M. Pecht, ECS Transactions Vol. 27, Iss. 1, pp. 227-236; China Semiconductor Technology Int’l Conf. 2010: Metrology, Reliability and Testing, Shanghai, China, March 18-19, 2010.

Anomaly Detection Through a Bayesian Support Vector Machine, V. Sotiris, P. Tse and M. Pecht, Journal of Transaction on Reliability, Vol. 1, No. 1, pp. 1-11, June 2010.

Development of an optimized condition-based maintenance system by data fusion and reliability-centered maintenance, G. Niu, B. Yang and M. Pecht, Reliability Engineering and System Safety, Issue. 95, pp. 786-796, March 2010.

The Effect of Electrostatic Discharge on Electrical Overstress Susceptibility in a Gallium Arsenide MESFET-Based Device, V. Eveloy, Y. Hwang and M. Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 7, No. 1, pp. 200-208, March 2010.

A Prognostics and Health Management Roadmap for Information and Electronics-rich Systems, R. Jaai and M. Pecht, Microelctronics Reliability, Vol. 50, pp. 317-323, March 2010.

The Influence of H2S Exposure on Immersion-Silver-Finished PCBs Under Mixed-Flow Gas Testing, S. Zhang, M. Osterman, A. Shrivastava, R. Kang and M. Pecht, IEEE Transactions on Device and Materials Reliability, Vol.10, No.1, pp. 71-81, March 2010.

Stress Relaxation Testing of Stamped Metal Land-Grid-Array Sockets, V. Challa, L.D. Lopez, M. Osterman and M. Pecht,IEEE Transactions on Device and Materials Reliability, Vol.10, No.1, pp.55-61, March 2010.

Improved Reliability Testing with Multi-axial Electrodynamics Vibration, E. Habtour, G. Drake, A. Dasgupta, M. Al-Bassyiouni and C. Choi, 2010 Reliability and Maintainability Symposium, San Jose, California, January 25-28, 2010.

Prognostics in Wireless Telecare Networks: A Perspective on Serving the Rural Chinese Population, Fong, B. and M. Pecht, 2010 Prognostics & System Health Management Conf., Macau, China, Jan. 12-14, 2010.

Benefits Analysis of Prognostics in Systems, Sun, B., S. Zeng, R. Kang and M. Pecht, 2010 Prognostics & System Health Management Conf., Macau, China, Jan. 12-14, 2010.

Prognostics and Health Management for Energetic Materials Systems, Niu, G., D. Anand and M. Pecht, 2010 Prognostics & System Health Management Conf., Macau, China, Jan. 12-14, 2010.

Status of Research and Development on Prognostics and Health Management in China, Zhang, S., R. Kang, G. Niu and M. Pecht, 2010 Prognostics & System Health Management Conf., Macau, China, Jan. 12-14, 2010.

Improving Computer Manufacturing Management through Lean Six Sigma and PHM, Niu, G., D. Lau and M. Pecht, 2010 Prognostics & System Health Management Conf., Macau, China, Jan. 12-14, 2010.

Research on Electrostatic Monitoring Technology for Aero-engine Gas Path, Wen, Z., H. Zuo, D.K. Lau and M. Pecht, 2010 Prognostics & System Health Management Conf., Macau, China, Jan. 12-14, 2010.

Physics-of-Failure Approach for Fan PHM in Electronics Applications, Oh, H., M. Azarian and M. Pecht, 2010 Prognostics & System Health Management Conf., Macau, China, Jan. 12-14, 2010.

Anomaly Detection of Notebook Computer Based on Weibull Decision Metrics, Niu, G., S. Singh, S.W. Holland and M. Pecht, 2010 Prognostics & System Health Management Conf., Macau, China, Jan. 12-14, 2010.

Prognostics-based Health Management for Free Air Cooling of Data Centers, Dai, J., D. Das and M. Pecht, 2010 Prognostics & System Health Management Conf., Macau, China, Jan. 12-14, 2010.

Study of Ensemble Learning-based Fusion Prognostics, Sun, J., H. Zuo, H. Yang and M. Pecht, 2010 Prognostics & System Health Management Conf., Macau, China, Jan. 12-14, 2010.

Parameter Selection for Health Monitoring of Electronic Products, Sachin Kumar, Eli Dolev and Michael Pecht, Microelectronics Reliability, Vol. 50, pp. 161–168, 2010.

 

Published in 2009

Back to the Top

---

Silver-Indium Transient Liquid Phase Sintering for High Temperature Die Attachment, P. Quintero, F. P. McCluskey,  International J. Microelectronics and Electronic Packaging, Vol 6, No. 1, pp. 66-74  (2009).

Life-Stress Relationship for Thin Film Transistor Gate Line Interconnects on Flexible Substrates, Thomas Martin and Aris Christou, International Sustainable Development Research Society, 2009.

Prognostics Implementation in Aerospace Applications, , Michael Pecht, Prognostics and Health Management, Condition-Based Maintenance and Health & Usage Monitoring Symposium, 21-22 April, 2009.

Overview of PHMBIT, , Bruce Woollard, 2009 8th International Conference on Reliability, Maintainability and Safety,20-24 July, 2009.

Methods for Probabilistic Fault Diagnosis: An Electrical Power System Case Study , Brian W. Ricks, Ole J. Mengshoel, Annual Conference of the Prognostics and Health Management Society, 2009.

Benchmarking Diagnostic Algorithms on an Electrical Power System Testbed , Tolga Kurtoglu, Sriram Narasimhan, Scott Poll, David Garcia, Stephanie Wright, Annual Conference of the Prognostics and Health Management Society, 2009.

Power Management for a Distributed Wireless Health Management Architecture, Sankalita Saha, Bhaskar Saha, Kai Goebel, Annual Conference of the Prognostics and Health Management Society, 2009.

Prognostics Enhanced Reconfigurable Control of Electro-Mechanical Actuators, Douglas W. Brown, George Georgoulas, Brian Bole, Hai-Long Pei, Marcos Orchard, Liang Tang, Bhaskar Saha, Abhinav Saxena, Kai Goebel, George Vachtsevanos, Annual Conference of the Prognostics and Health Management Society, 2009.

Robust Differential Protection with Intermittent Cable Faults for Aircraft AC Generators, Ashraf Tantawy, Xenofon Koutsoukos, Gautam Biswas, Annual Conference of the Prognostics and Health Management Society, 2009.

Towards Accelerated Aging Methodologies and Health Management of Power MOSFETs, Jose R. Celaya, Nishad Patil, Sankalita Saha, Phil Wysocki, Kai Goebel, Annual Conference of the Prognostics and Health Management Society, 2009.

Modeling Li-ion battery capacity depletion in a particle filtering framework, Bhaskar Saha, Kai Goebel, Annual Conference of the Prognostics and Health Management Society, 2009.

Experimental data collection and modeling for nominal and fault conditions on electro-mechanical actuators, Edward Balaban, Abhinav Saxena, Kai Goebel, Carl S. Byington, Matthew Watson, Sudarshan Bharadwaj, Matthew Smith, Annual Conference of the Prognostics and Health Management Society, 2009.

Effects of Lightning Injection on Power-MOSFETs, Jose Celaya, Sankalita Saha, Phil Wysocki, Jay Ely, Truong Nguyen, George Szatkowski, Sandra Koppen, John Mielnik, Roger Vaughan, Kai Goebel, Annual Conference of the Prognostics and Health Management Society, 2009.

Effect of Electrostatic Discharge on Electrical Characteristics of Discrete Electronic Components (Technical Brief), Phil Wysocki, Vladislav Vashchenko, Jose Celaya, Sankalita Saha, Kai Goebel, Annual Conference of the Prognostics and Health Management Society, 2009.

Application of Blind Source Separation Techniques for Generation of PHM Useful Information, Bruno P. Leão, João P. P. Gomes, Roberto K. H. Galvão, Takashi Yoneyama, Annual Conference of the Prognostics and Health Management Society,2009.

Analysis of Built-In Self-Tests for Electronic Control Units, K. Wojtek Przytula, David Allen, Tsai-Ching Lu, Noel Anderson, and Jason Wanner, Annual Conference of the Prognostics and Health Management Society, 2009.

The influence of SO2 environments on immersion silver finished PCBs by mixed flow gas testing, Shunong Zhang, Michael Osterman, Anshul Shrivastava, Rui Kang and Michael G. Pecht, International Conference on Electronic Packaging Technology & High Density Packaging, 2009. ICEPT-HDP '09., Vol., No., pp 116-122, August 10-13 2009, DOI: 10.1109/ICEPT.2009.5270782.

Using Tear-down Analysis as a Vehicle to Teach Electronic Systems Manufacturing Cost Modeling, Peter Sandborn, Jessica Myers, Thomas Barron, and Micheal Mccarthy, Int. Journal of Eng. Education, Vol. 25, No. 1, pp. 42-52, 2009.

Precursor Monitoring Approach for Reliability Assessment of Cooling Fans, H. Oh, T. Shibutani, M. Pecht, J Intell Manuf, DOI 10.1007/s10845-009-0342-2, 2009.

Using Tear-down Analysis as a Vehicle to Teach Electronic Systems Manufacturing Cost Modeling, Peter Sandborn, Jessica Myers, Thomas Barron, and Micheal Mccarthy, Int. Journal of Eng. Education, Vol. 25, No. 1, pp. 42-52, 2009.

Quantitative Characterization of True Leak Rate of Micro to Nano-liter Packages Using a Helium Mass Spectrometer, A. Goswami, B. Han, S.-J. Ham and B.-G. Jeong, IEEE Transactions on Advanced Packaging, Vol. 32, No. 2, pp. 440-447, 2009.

A Methodology for Determining the Return on Investment Associated with Prognostics and Health Management, K. Feldman, T. Jazouli, and P. Sandborn, IEEE Trans. on Reliability, Strasbourg, Vol. 58, No. 2, pp. 305-316, June 2009.

Hermeticity Evaluation of Polymer-Sealed MEMS Packages by Gas Diffusion Analysis, C. Jang, A. Goswami and B. Han, IEEE/ASME Journal of Microelectromechanical Systems, Vol. 18, No. 3, pp. 577-587, 2009.

In-situ Measurement of Gas Diffusion Properties of Polymeric Seals Used in MEMS Packages by Optical Gas Leak Test, C. Jang, A. Goswami, B. Han and S. Ham, Journal of Micro/Nano-lithography, MEMS, and MOEMS, Vol. 8, No. 4, 043025, 2009. 

An Assessment of Immersion Silver Surface Finish for Lead-Free Electronics, W. Wang, A. Choubey, M. Azarianand M. Pecht, Journal of Electronic Materials, Vol. 38, No. 6, pp. 815-827, 2009.

Impact of Thermal Aging on the Growth of Cu-Sn Intermetallic Compounds in Pb-free Solder Joints in 2512 Resistors, P. Chauhan, M. Osterman and M.Pecht, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition (IMECE2009), Lake Buena Vista, Florida, USA, November 13-19, 2009.

Physics of Failure Based Virtual Testing of Communication Hardware, Elviz George, Diganta Das, Michael Osterman, and Michael Pecht, ASME International Mechanical Engineering Congress and Exposition, Lake Buena Vista, Florida, US, 13-19 Nov, 2009.

Reliability of SAC305 and Sn3.5Ag Solders under High Temperature Thermal Cycling, Elviz George, Diganta Das, Michael Osterman, and Michael Pecht, International Conference on Soldering & Reliability (SMTA), Toronto, Ontario, Canada, 20-22 May, 2009.

Use of the Skin Effect for Detection of Interconnect Degradation, M. H. Azarian, D. Kwon, and M. Pecht, IMAPS 42nd Int. Symposium on Microelectronics, San Jose, CA, Nov. 1-5, 2009.

Comparative Assessment of Electrochemical Migration on PCBs with Lead-Free and Tin-Lead Solders, X. He, M. Azarian and M. Pecht, SMT Magazine, August 2009.

Effect of temperature cycling parameters on the durability of Pb-free solders, M. Osterman and P. Chauhan, IMAPS 2009 42nd International Symposium on Microelectronics, San Jose Convention Center - San Jose, California, USA, November 1-5, 2009.

Comparison of Whisker Growth from Pressure-Induced and Environment-Induced Whisker Growth Test Methods, M. Osterman, L. Panashchenko, A. Heronime, and P. Su, IMAPS 2009 42nd International Symposium on Microelectronics, San Jose Convention Center - San Jose, California, USA, November 1-5, 2009.

Analytical Solutions of Gas Transport Problems in Inorganic/Organic Hybrid Barrier Structures, C. Jang and B. Han, Journal of Applied Physics, 105, 093532, 2009.

Leakage Current Mechanism in Epoxy-BaTiO3 Composite Dielectric Used in Embedded Capacitors, M. Alam, M. Azarian, M. Osterman, and M. Pecht, Virtual Capacitor and Resistor Technology Symposium (CARTS), 2009.

Reliability of Embedded Planar Capacitors under Temperature and Voltage Stress, M. Alam, M. Azarian, M. Osterman, and M. Pecht, Capacitor and Resistor Technology Symposium (CARTS), Jacksonville, FL, 2009.

China as Hegemon of the Global Electronics Industry: How It Got That Way and Why It Won’t Change, Michael Pecht and Leonard Zuga, IEEE Transactions on Components and Packaging Technology, Vol. 32, No. 4, pp. 935-939, December 2009.

Solder Ball Attachment Assessment of Reballed Plastic Ball Grid Array Packages, Lei Nie, Michael Osterman, Fubin Song, Jeffery Lo, S. W. Ricky Lee and Michael Pecht, IEEE Transactions on Components and Packaging Technology, Vol. 32, No. 4, pp. 901-908, December 2009.

Reliability Assessment of Land Grid Array Sockets Subjected to Mixed Flowing Gas Environment, Shuang Yang, Ji Wu and Michael G. Pecht , IEEE Transactions on Reliability, Vol. 58, No. 4, pp. 634-640, December 2009.

Health Monitoring and Prognostics of Electronics Subject to Vibration Load Conditions, J. Gu, D. Barker, and M. Pecht, IEEE Sensors Journal, Vol. 9, No. 11, pp. 1479-1485, November 2009.

Conductive Filament Formation in Printed Circuit Boards – Effects of Reflow Conditions and Flame Retardants, Bhanu Sood and Michael Pecht, 35th International Symposium for Testing and Failure Analysis(ISTFA 2009), San Jose, CA, November 15-19, 2009.

Degradation Analysis of Thick Film Chip Resistors, Bhanu Sood, Diganta Das, Michael H. Azarian and Michael Pecht, 35th International Symposium for Testing and Failure Analysis(ISTFA 2009), San Jose, CA, pp. 293-300, November 15-19, 2009.

Effect of Lead-Free Soldering on Key Material Properties of FR-4 Printed Circuit Board Laminates, R. Sanapala, B. Sood, D. Das, and M. Pecht, IEEE Transactions on Electronics Packaging Manufacturing, Vol. 32, No. 4, pp. 272-280, October 2009.

Investigation on Mechanism of Creep Corrosion of Immersion Silver Finished Printed Circuit Board by Clay Tests, Y. Zhou and M. Pecht, 55th Annual IEEE Holm Conference, Vancouver, British Columbia, Canada, pp. 321-330, September 14-16, 2009.

Tin Whisker Reliability in Microelectronics, T. Shibutani, Q. Yu, and M. G. Pecht, Micromaterials and Nanomaterials, Issue 9, pp. 49-53, 2009.

Critical Review of the Engelmaier Model for Solder Joint Creep Fatigue Reliability, P. Chauhan, M. Osterman, M. Pecht and S.W.R. Lee, IEEE Transactions on Components and Packaging Technologies, Vol. 32, No. 3, pp. 693-700, September 2009.

Baseline Performance of Notebook Computers Under Various Environmental and Usage Conditions for Prognostics, S. Kumar and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 32, No. 3, pp. 667–676, September 2009.

Computer Usage Monitoring for Design and Reliability Tests, J. Gu, N.M. Vichare, E.C. Tinsley, and M.G. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 32, No. 3, pp. 550-556, September 2009.

Effects of Temperature Cycling and Elevated Temperature/Humidity on the Thermal Performance of Thermal Interface Materials, V. Khuu, M. Osterman, A. Bar-Cohen and M.Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 9, No. 3, pp. 379-391, September 2009.

Warpage Analysis of Flip-Chip PBGA Packages Subject to Thermal Loading, Ming-Yi Tsai, Hsing-Yu Chang, and Michael Pecht,IEEE Transactions on Device and Materials Reliability, Vol. 9, No. 3, pp. 419-424, September 2009.

Failure Analysis and Redesign of the Evaporator Tubing in a Kimchi Refrigerator, Seong-woo Woo, Dennis L. O’Neal, and Michael Pecht, Engineering Failure Analysis, Accepted, August 2009.

Model-based and Data-driven Prognosis of Automotive and Electronic Systems, C. Sankavaram, B. Pattipati, A. Kodali, K. Pattipati, M. Azam, S. Kumar, and M. Pecht, 5th Annual IEEE Conference on Automation Science and Engineering, Bangalore, India, pp. 96-101, August 22-25, 2009.

A Fusion Prognostics Method for Remaining Useful Life Prediction of Electronic Products, Shunfeng Cheng and Michael Pecht, 5th Annual IEEE Conference on Automation Science and Engineering, Bangalore, India, pp. 102-107, August 22-25, 2009.

A Rapid Life-Prediction Approach for PBGA Solder Joints Under Combined Thermal Cycling and Vibration Loading Conditions,H. Qi, M. Osterman and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 32, No. 2, pp. 283-292, June 2009.

Precursor Parameter Identification for Insulated Gate Bipolar Transistor (IGBT) Prognostics, N. Patil, J. Celaya, D. Das, K. Goebel, and M. Pecht, IEEE Transactions on Reliability, Vol. 58, No. 2, pp. 271-276, June 2009.

Modeling of IC Socket Contact Resistance for Reliability and Health Monitoring Applications, L.D. Lopez and M.G. Pecht, IEEE Transactions on Reliability, Vol. 58, No. 2, pp. 264-270, June 2009.

Environmental  Regulations in Lead-free and Halogen-free Electronics, L. Nie, J. Cai, M. Pecht, and R. Ciocci,  Electronics & Packaging (Chinese), Vol. 9, No. 6, pp. 42-47, June 2009.

Examination of Nickel Under-layer as a Tin Whisker Mitigator , Lyudmyla Panashchenko and Michael Osterman, Electronic Component and Technology Conference,May 2009.

Health Assessment and Prognostics of Electronic Products: An Alternative to Traditional Reliability Prediction Methods, J. Gu and M. Pecht, Electronics Cooling, Vol. 15, No. 2, pp. 10-16, May 2009.

Identification of Interconnect Failure Mechanisms Using RF Impedance Analysis, D. Kwon, M. H. Azarian, and M. Pecht, IEEE Signal Propagation on Interconnects, Strasbourg, France, May 2009.

Physics-of-failure-based Prognostics for Electronic Products, M. Pecht and J. Gu, Transactions of the Institute of Measurement and Control, Vol. 31, No. 3/4, pp. 309–322, 2009.

Early Detection of Interconnect Degradation by Continuous Monitoring of RF Impedance, D. Kwon, M. H. Azarian, M. Pecht, IEEE Trans. on Device and Materials Reliability, Vol. 9, No. 2, , pp. 296-304, Jun. 2009.

Detecting Failure Precursors in BGA Solder Joints, Rubyca Jaai, Michael Pecht, and Jason Cook, 2009 Annual Reliability and Maintainability Symposium, 26 - 29 January, 2009.

A Framework for Cost-effective and Accurate Maintenance Combining CBM RCM and Data Fusion, G. Niu and M. Pecht, 8th International Conference on Reliability, Maintainability and Safety, July 20 - 24, 2009.

Detection of Solder Joint Failure Precursors on Tin-Lead and Lead-Free Assemblies using RF Impedance Analysis, D. Kwon, M. H. Azarian, M. Pecht, IEEE Electronic Components and Technology Conference, San Diego, CA, pp. 663-667, May 2009.

Solder Ball Attachment Assessment of Reballed Plastic Ball Grid Array Packages, L. Nie, M. Osterman, M. Pecht, F. Song, J. Lo and S.K. Lee, Equipment for Electronic Products Manufacturing (Chinese), pp. 1-5, February 2009.

Reliability, Maintainability, and Availability, Michael Pecht, in Handbook of Systems Engineering and Management. Ed. Andrew P. Sage and William B. Rouse. 2nd ed. Wiley-Interscience, New York, NY, pp. 361-95, 2009.

Copper Pad Dissolution and Microstructure Analysis of Reworked Plastic Grid Array Packages in Lead-free and Mixed Assemblies, L. Nie, M. Osterman, and M. Pecht, SMTA Journal, Vol. 22, No. 2, pp. 13-20, 2009.

Precursor Monitoring Approach for Reliability Assessment of Cooling Fans, Hyunseok Oh, Tadahiro Shibutani, and Michael Pecht, Proceedings of International Conference of Electronics Packaging, Kyoto, Japan, April 2009.

Improving the Reliability of a Water Dispenser Lever in a Refrigerator Subjected to Repetitive Stresses, Seong-woo Woo, Dennis L. O’Neal, and Michael Pecht, Engineering Failure Analysis, Vol. 16, No. 5, pp. 1597-1606, July 2009.

Design of a Hinge Kit System in a Kimchi Refrigerator Receiving Repetitive Stresses, Seong-woo Woo, Dennis L. O’Neal, and Michael Pecht, Engineering Failure Analysis, Vol. 16, No. 5, pp. 1655-1665, July 2009.

Copper Pad Dissolution and Microstructure Analysis of Reworked Plastic Grid Array Assemblies, L. Nie, M. Osterman, and M. Pecht, IPC APEX 2009, Las Vegas, NV, March 31-April 2, 2009.

Reliability Design and Case Study of a Refrigerator Compressor Subjected to Repetitive Loads, Seong-woo Woo, Dennis L. O'Neal, and Michael Pecht, International Journal of Refrigeration, Vol. 32, pp. 478-486, 2009.

A Residual Estimation Based Approach for Isolating Faulty Parameters, S. Kumar, E. Dolev, M. Pompetzki, and M. Pecht, IEEE Aerospace Conference, Big Sky, MT, March 7-14, 2009.

Prognostics-Based Product Qualification, M. Pecht and J. Gu, IEEE Aerospace Conference, Big Sky, MT, March 7-14, 2009.

Standards for Tin Whisker Test Methods on Lead-Free Components, Tadahiro Shibutani, Michael Osterman, and Michael Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 32, No. 1, pp. 216-219, March 2009.

Assessing the Reliability of Elastomer Sockets in Temperature Environments, L. D. Lopez, V. Challa, and M. G. Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 9, Issue 1, pp. 80-86, March 2009.

Reliability Design and Case Study of a Refrigerator Compressor Subjected to Repetitive Loads, S. Woo, M. Pecht, and D. O'Neal, International Journal of Refrigeration, Vol. 32, No. 3, pp. 478-486, 2009.

Evaluation of Pure Tin Plated Copper Alloy Substrates for Tin Whiskers, S. Mathew, M. Osterman, M. Pecht, and F. Dunlevey, Circuit World, Vol. 35, No. 1, pp. 3-8, 2009.

A Highly Accurate Method for Assessing Reliability of Redundant Arrays of Inexpensive Disks (RAID), Jon G. Elerath and Michael Pecht, IEEE Transactions on Computers, vol. 58, no. 3, pp. 289-299, March 2009.

A Meso-scale Damage Evolution Model for Cyclic Fatigue of Viscoplastic Materials, L. Ladani and A. Dasgupta,International Journal of Fatigue Vol. 31, pp. 703–711, 2009.

 

Published in 2008

Back to the Top

---

Reliability of Printed Circuit Boards Processed Using No-Clean Flux Technology in Temperature–Humidity–Bias Conditions, Sheng Zhan, Michael H. Azarian, and Michael G. Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 8, No. 2, pp. 426-434, June, 2008.

Failure Prognostics of Multilayer Ceramic Capacitors in Temperature-Humidity-Bias Conditions , Jie Gu, Michael H. Azarian, and Michael G. Pecht 2008 International Conference on Prognostics and Health Management, October 6-9, 2008, Denver, CO.

Stress Relaxation in a Commercial Stamped Metal Land Grid Array Socket, Vidyu Challa, Myra Torres, Michael Osterman and Michael Pecht 2008 58th Electronic Components and Technology Conference, pp. 2139 - 2144, May 2008, DOI: 10.1109/ECTC.2008.4550281

Strategic Management of DMSMS in Systems, Peter Sandborn, DSP Journal, pp. 24-30, , April/June 2008.

On Applicability of MIL-Spec-Based Helium Fine Leak Test to Packages with Sub-micro liter Cavity Volumes, A. Goswami and B. Han, Microelectronics Reliability, Vol. 48, pp. 1815–1821, 2008.

Ideal Laminate Theory for Water Transport Analysis of Inorganic/Organic Multilayer Barrier Films, C. Jang, Y. Cho and B. Han, Applied Physics Letters, Vol. 93, 13307, 2008.

Anisotropic Conductive Adhesives for Flip-chip Interconnections, Weiqiang Wang, Y.C. Chan, and Michael Pecht, Journal of Adhesion Science & Technology, Vol. 22, Numbers 8-9, pp. 871-892, 2008.

Thick Film Resistor Failures, A. Shrivastava, A. Amin, B. Sood, M. Azarian, M. Pecht, ISTFA 2008, 34th International Symposium for Testing and Failure Analysis, Portland, OR, Nov. 2-6, 2008.

Pressure-induced Tin Whisker Formation, T. Shibutani, Q. Yu, M. Shiratori, M. Pecht, Microelectronics Reliability, Vol. 48, pp. 1033-1039, 2008.

Vibration Durability of Mixed Solder Interconnects, Gustavo Plaza, Dr. Michael Osterman, Prof. Michael Pecht, 41st International Symposium on Microelectronics, Providence, RI, Nov. 4-6, 2008.

On the applicability of MIL-Spec-based helium fine leak test to packages with sub-micro liter cavity volumes, Arindam Goswami and Bongtae Han, Microelectronics Reliability, Vol 48, 1815-1821, 17 September, 2008.

Electro-migration and thermo-migration behaviour of flip chip solder joints in high current density packages, D. Yang, Y.C. Chan, B.Y. Wu, M. Pecht, Journal of Material Research, Vol. 23, No. 9, pp. 2333-2339, Sep 2008.

Effect of Lead-free Soldering on Key Material Properties of FR-4 Printed Circuit Board laminates R. Sanapala, B. Sood, D. Das, M. Pecht, C.Y. Huang, and M.Y. Tsai, EMAP, 2008.

Health Assessment of Electronic Products using Mahalanobis Distance and Projection Pursuit Analysis, S. Kumar, V. Sotiris, M. Pecht, International Journal of Computer, Information, Systems Science, and Engineering, vol. 2, no. 4, pp. 242 - 250, Fall 2008.

Application of FPGA units in combined temperature cycle and vibration reliability tests of lead-free interconnections,Matkowski P., Urbanski K., Falat T., Felba J., Zaluk Z., Zwierta R., Dasgupta A., Pecht M., 2nd Electronics System integration Technology Conference, London-Greenwich, p.1375-1379, 2008.

Designing Engineering Systems for Sustainability, P. Sandborn and J. Myers, Handbook of Performability Engineering, ed. K. B. Misra, Springer, pp. 81-104, 2008.

Reliability Integrated Engineering Using Physics-of-Failure, Weiqiang Wang, Diganta Das, Michael Osterman, and Michael Pecht, Book Chapter for: Encyclopedia of Statistics in Quality and Reliability, John Wiley & Sons, Ltd, Chichester, UK, 2008.

Constructing a Product Design for Environment Process, D. P. Fitzgerald, J. W. Herrmann, P. A. Sandborn, L. C. Schmidt, and T. H. Gogoll, Handbook of Performability Engineering, ed. K.B. Misra, Springer, pp. 57-69, 2008.

Mechanics of Adhesively Bonded Flip-Chip-on-Flex Assemblies. Part II: Effect of Bump Co-planarity on Manufacturability and Durability of Non-Conducting Adhesive Assemblies, D. Farley, A. Dasgupta, and J.F.J. Caers, Journal of Adhesion Science and Technology, Vol. 22,pp. 1757-1780, 2008.

Mechanics of Adhesively Bonded Flip-Chip-on-Flex Assemblies. Part I: Durability of An-isotropically Conductive Adhesive Interconnects, J. Haase, D. Farley, P. Iyer, P. Baumgartner, A. Dasgupta, and J. F. J. Caers, Journal of Adhesion Science and Technology, vol. 22, pp. 1733-1756, 2008.

Anisotropic Conductive Adhesives for Flip-chip Interconnections, Weiqiang Wang, Y.C. Chan, and Michael Pecht, in Electrically Conductive Adhesives, R. Gomatam and K. L. Mittal, editors, VSP, Leiden, the Netherlands, 2008.

Effect of Selected Process Parameters on Durability and Defects in Surface-Mount Assemblies for Portable Electronics, Ladani, L., Dasgupta, A., Cardoso, I., and Monlevade, E., IEEE Trans on Electronics Packaging and Manufacturing, Vol 31, No. 1, 2008.

Integrated Measurement Technique for Curing Process-dependent Mechanical Properties of Polymeric Materials Using Fiber Bragg Grating, Y. Wang, B. Han, D. W. Kim, A. Bar-Cohen, and P. Joseph, Experimental Mechanics, Vol. 48, pp. 107-117, 2008.

On Ultra-Fine Leak Detection of Hermetic Wafer Level Packages, A. Goswami and B. Han, IEEE Transactions on Advanced Packaging, Vol. 31, No. 1, pp. 14-21, 2008.

Advanced Thermal-Moisture Analogy Scheme for An-isothermal Moisture Diffusion Problem, C. Jang, S. Park, B. Han, and S. Yoon, Journal of Electronic Packaging, Vol. 130, 2008.

Nonlinear Stress Modeling Scheme to Analyse Semiconductor Packages Subjected to Combined Thermal and Hygroscopic Loading, S. Yoon, C. Jang and B. Han, Journal of Electronic Packaging, Vol. 130, 024502-1/6, 2008.

Ideal Laminate Theory for Water Transport Analysis of Inorganic/Organic Multilayer Barrier Films, C. Jang, Y. Cho and B. Han,Applied Physics Letters, Vol. 93, 13307, 2008.

A Random Trimming Approach for Obtaining High-Precision Embedded Resistors, P.A.M. Sandborn and P. Sandborn, Proceedings of the Army Science Conference, Orlando, FL, December 2008.

Analytical Model for Thermal Warpage History of Laminated PBGAs, L. Munday, N. Keller, A. Dasgupta, B-T. Han, Proceedings of ASME IMECE, Paper Number IMECE2008-67345, Boston, MA, Nov, 2008.

Mechanical strength of copper-silicon interfaces in planar metallization power modules, K. Sinha, A. Dasgupta, R. Beaupre, A. Gowda, ASME International Mechanical Engineering Congress & Exposition, Paper Number IMECE2008-67367,Boston, MA, Nov, 2008.

Dynamic Recrystallization of Sn3.0Ag0.5Cu Pb-Free Solder Alloy, K. Holdermann, G. Cuddalorepatta, and A. Dasgupta, ASME IMECE, Paper Number IMECE2008-67671, Boston, MA, Nov 2008.

Modeling and simulation of shock and drop loading for complex portable electronic systems, F. Askari, M. Al- Bassyiouni, A. Dasgupta, ASME International Mechanical Engineering Congress and Exposition, Paper No. IMECE2008-67749,Boston, MA, Nov 2008.

The Analysis of Return on Investment for PHM Applied to Electronic Systems, Kiri Feldman, Peter Sandborn, and Taoufik Jazouli, Proceedings of the 1st International Conference on Prognostics and Health Management, Denver, CO, Oct 6-9,2008.

Failure Precursors for Insulated Gate Bipolar Transistors, Nishad Patil, Diganta Das, Kai Goebel, and Michael Pecht, Proceedings of the 1st International Conference on Prognostics and Health Management, Denver, CO,Oct 6-9, 2008.

IDDQ Trending as a Precursor to Semiconductor Failure , Guangfan Zhang, Diganta Das, Roger Xu, and Michael Pecht, Proceedings of the 1st International Conference on Prognostics and Health Management, Denver, CO,Oct 6-9, 2008.

Failure Mechanism Based Prognostics, Sony Mathew, Diganta Das, Roger Rosenberger, and Michael Pecht, Proceedings of the 1st International Conference on Prognostics and Health Management, Denver, CO,Oct 6-9, 2008.

Assessing the Operating Environment of IC Sockets in High-End Servers for Prognostics and Health Monitoring, Leoncio Lopez and Michael Pecht, Proceedings of the 1st International Conference on Prognostics and Health Management, Denver, CO,Oct 6-9, 2008.

Early Detection of Interconnect Degradation Using RF Impedance and SPRT, Daeil Kwon, Michael H Azarian, and Michael Pecht, Proceedings of the 1st International Conference on Prognostics and Health Management, Denver, CO,Oct 6-9, 2008.

Failure Prognostics of Multilayer Ceramic Capacitor in Temperature-Humidity- Bias Conditions, Jie Gu, Michael Azarian, and Michael Pecht, Proceedings of the 1st International Conference on Prognostics and Health Management, Denver, CO,Oct 6-9, 2008.

Maxima-SPRT Methodology for Health Monitoring of Contact Resistance in IC Sockets, Leoncio Lopez and Michael Pecht, Proceedings of the 1st International Conference on Prognostics and Health Management, Denver, CO,Oct 6-9, 2008.

Identification of Failure Precursor Parameters for Insulated Gate Bipolar Transistors (IGBTs), N. Patil, D. Das, K. Goebel and M. Pecht, Proceedings of the IEEE Prognostics and Health Management Conference, Denver, COOctober 2008.

An Electronic Part Total Ownership Cost Model, P. Sandborn and V. Prabhakar, Proceedings DMSMS Conference, Palm Springs, CA,September 24, 2008.

Advanced Part Obsolescence Forecasting as an Enabler for Strategic Management of DMSMS Problems, P. Sandborn and O. Ahmad, Proceedings DMSMS Conference, Palm Springs, CA,September 24, 2008.

Anomaly Detection in Electronic Products, Abraham Tomy Michael, Sachin Kumar, Sony Mathew and Michael Pecht, 2nd Electronics System-Integration Technology Conference,, Greenwich, London, UK,September 1-4, 2008.

Constraint-Driven Refresh Planning of Systems Subject to Obsolescence, P. Sandborn and R. Nelson III, Proceedings DMSMS Conference, Palm Springs, CA, September 2008.

The Application of Product Platform Design to the Reuse of Electronic Components Subject to Long-Term Supply Chain Disruptions, P. Sandborn, V. Prabhakar, and B. Eriksson Proceedings of the ASME 2008 International Design Engineering Conferences & Computers and Information in Engineering Conference, New York, NY, Aug. 6, 2008.

Sensor System Selection for Prognostics and Health Monitoring, S. Cheng, M. Azarian, and M. Pecht, 2008 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2008), Brooklyn, New York, USA,August 3-6, 2008.

Analysing the Return on Investment Associated With Prognostics and Health Management of Electronic Products, Kiri Feldman and Peter Sandborn, 2008 ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2008), Brooklyn, New York, USA,August 3-6, 2008.

Failure Precursors for Insulated Gate Bipolar Transistors, N. Patil, D. Das, K. Goebel and M. Pecht, 9th International Seminar on Power Semiconductors, Prague, 27-29 August 2008.

Dominant Mechanism for Crack Propagation in Non-planar Interfaces, K. Sinha, J. Varghese, A. Dasgupta, XXII International Congress of Theoretical and Applied Mechanics, Paper Number 12063,Adelaide, Australia, August, 2008.

Qualification for Product Development, Weiqiang Wang,; Azarian, Michael H.; Pecht, Michael, International Conference on Electronic Packaging Technology and the International Symposium on High Density Packaging (ICEPT-HDP), 28-31 July, 2008.

A Hybrid Prognostics Methodology for Electronics Systems, S. Kumar, M. Torres, M.Pecht, and Y. C. Chan - Special Session on Computational Intelligence for Anomaly Detection, Diagnosis, and Prognosis, IEEE World Congress on Computational Intelligence (WCCI 2008),Hong Kong, June 1-6, 2008.

Prognostics of Electronics under Vibration Using Acceleration Sensors, Jie Gu, Donald Barker, and Michael Pecht, Proceeding for 62nd Meeting of the Society for Machinery Failure Prevention Technology (MFPT), pp. 253-263, Virginia Beach, VA,May 2008.

Autonomous Prognostic Monitoring Device, S.Cheng, M. Torres, L. Thomas, and M. Pecht, Proceedings of the 62th Meeting of the Society for Machinery Failure Prevention Technology, pp.505-516 , Virginia Beach, VA, May 2008.

Simultaneous Measurements of Effective Chemical Shrinkage and Modulus Evolution During Polymerization, Y. Wang, B. Han, A. Bar-Cohen and S. Cho, Proceedings of the 2008 58th Electronic Components and Technology Conference, Orlando, FL, May 27-30, 2008.

Effect of Primary Creep Behaviour on Fatigue Damage Accumulation Rates in Accelerated Thermal Cycling of Sn3.0Ag0.5Cu Pb-Free Interconnects, G. Cuddalorepatta, and A. Dasgupta, Proceedings, EuroSiME Conference,Freiburg, Germany, April 2008.

Trapped on Technology’s Trailing Edge, P. Sandborn, IEEE Spectrum, Vol. 45, No. 4, pp. 42-45, 54, 56-58, April 2008.

Minimizing Life Cycle Cost by Managing Product Dependability via Validation Plan and Warranty Return Cost, A. Kleyner and P. Sandborn, International Journal of Production Economics, Vol. 112, No. 2, pp. 796-807, April 2008.

Mahalanobis Distance and Projection Pursuit Analysis for Health Assessment of Electronic Systems, S. Kumar, V. Sotiris, and M. Pecht, IEEE Aerospace Conference, Big Sky, Montana, March 2008.

Damage Initiation and Propagation in Voided Joints, Ladani, L. and Dasgupta, A., ASME Journal of Electronic Packaging, Vol 130, Issue 1, 011008, March 2008.

A Random Trimming Approach for Obtaining High-Precision Embedded Resistors, P. Sandborn and P.A. Sandborn, IEEE Trans. on Advanced Packaging, Vol. 31, No. 1, pp. 76-81, February 2008.

Data Analysis Approach for System Reliability, Diagnostics and Prognostics, S. Kumar and M. Pecht, Pan Pacific Microelectronics Symposium,Hawaii, 22 - 24 Jan, 2008.

Analyzing the Return on Investment Associated with Prognostics and Health Management of Electronic Products, Michael Pecht and Tadahiro Shibutani, Proceedings of the ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, August 3 - 6, 2008, Brooklyn, New York, USA.2008.

Prognostics and Health Management Using Physics of Failure, J. Gu and M. Pecht, 54th annual Reliability and Maintainability Symposium (RAMS), Las Vegas, Nevada, Jan. 2008.

Commercial Impact of Silicon Carbide - Opportunities and Challenges in Realizing the Full Potential of SiC Power Devices, R. Singh and M. Pecht, IEEE Industrial Electronics Magazine, pp. 19-31, Sept. 2008.

Solder Ball Attachment Assessment of Reballed Plastic Ball Grid Array Packages, L. Nie, M. Osterman, M. Pecht, F. Song, J. Lo and S.K. Lee, APEX 2008, Las Vegas, Nevada, March 30th-April 3rd, 2008.

Failure Analysis and Redesign of A Helix Upper Dispenser, S. Woo and M. Pecht, Engineering Failure Analysis, Vol 15, Issue 6,  Pg 642-653, Sep 2008.

Microstructure and Intermetallics Formation in SnAgCu BGA Components attached with SnPb Solder under Isothermal Aging, A. Choubey, M. Osterman, and M. Pecht. IEEE Transactions on Device and Materials Reliability, Vol 8, Issue 1, pp 160-167, 2008.

Failure Site Isolation on Passive RFID Tags, B. Sood, D. Das, M. Azarian, M. Pecht, B. Bolton, and T. Lin. , Proceedings of the 15th IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits July 7-11, Singapore, pp. 337-341, 2008.

Intermetallics Characterization of Lead-free Solder Joints under Isothermal Aging, A. Choubey, H. Yu, M. Osterman, M. Pecht, F. Yun, L., Youghong and X. Ming., JJournal of Electronic Materials, Vol. 37, No. 8, pp. 1130-1138, August 2008.

No-fault-found and Intermittent Failures in Electronic Products, Qi. Haiyu., S. Ganesan and M. Pecht, Microelectronics Reliability, Vol. 48, Issue 5, pp. 663-674, May 2008.

Flex Cracking of Multilayer Ceramic Capacitors Assembled with Lead-Free and Tin-Lead Solders, M. Azarian, M. Keimasi, and M. Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 8, Issue 1, pp 182-192, March 2008.

Effect of Solder Joint Degradation on RF Impedance, D. Kwon, M. Azarian, and M. Pecht, 12th IEEE Workshop on Signal Propagation on Interconnect, Avignon, France, pp. 1-4, 2008.

Detection of Solder Joint Degradation Using RF Impedance Analysis, D. Kwon, M. Azarian, and M. Pecht, IEEE Electronic Components and Technology Conference, Lake Buena Vista, FL, pp. 606-610, 2008.

China's Efforts in Prognostics and Health Management, Shunong Zhang, Rui Kang, Xiaofei He, and Michael G. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 31, No. 2, June 2008.

 

Published in 2007

Back to the Top

---

Introduction to Special Section on Electronic Systems Prognostics and Health Management, Michael Pecht and Peter Sandborn, Microelectronics Reliability, Vol. 47, Issue. 12, PP. 1847-1848, December 2007.

Integrating Technology Obsolescence Considerations Into Product Design Planning, Kiri Feldman, Peter Sandborn, ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 4 - 7 Sept, 2007.

On moisture diffusion modeling using thermal-moisture analogy , Samson Yoon, Bongtae Han and Zhaoyang Wang, Journal of Electronic Packaging, Vol 129, 421-426,, December 2007.

Software Obsolescence- Complicating the Part and Technology Obsolescence Management Problem, Peter Sandborn, IEEE Trans on Components and Packaging Technologies, Vol. 30, No. 4, pp. 886-888, , December 2007.

DMSMS Lifetime Buy Characterization Via Data Mining of Historical Buys, Peter Sandborn, Proceedings DMSMS Conference, Orlando, FL, November 2007.

Using Embedded Resistor Emulation and Trimming to Demonstrate Measurement Methods and Associated Engineering Model Development, Phillip A.M. Sandborn and Peter A.Sandborn, International Journal of Engineering Education, Vol. 23, No. 4, pp. 834-840, 2007.

Optimizing Embedded Passive Content in Printed Circuit Boards, Bevin Etienne and Peter Sandborn , IEEE Trans. on Electronics Packaging Manufacturing, Vol. 30, No. 4, pp. 246-257, October 2007.

Designing for Technology Obsolescence Management , Peter Sandborn , Proceedings of the 2007 Industrial Engineering Research Conference, 2007.

Integration of Technology Road-mapping Information and Business Case Development into DMSMS-Driven Design Refresh Planning of the V-22 Advanced Mission Computer , Jessica Myers and Peter Sandborn, Proceedings of the 2007 Aging Aircraft Conference, 2007.

Lifetime Buy Optimization to Minimize Life-cycle Cost , Dan Feng, Pameet Singh and Peter Sandborn, Proceedings of the 2007 Aging Aircraft Conference, 2007.

Cost Model for Assessing the Transition to Lead-Free Electronics , Peter Sandborn and Rifat Jafreen, Proceedings of the 2007 Aging Aircraft Conference, 2007.

A Taxonomy and Evaluation Criteria for DMSMS Tools, Databases and Services , Peter Sandborn, R. Jung, R. Wong, J. Becker, and the Common Use Tools Committee of the DMSMS Working Group, Proceedings of the 2007 Aging Aircraft Conference, 2007.

A Maintenance Planning and Business Case Development Model for the Application of Prognostics and Health Management (PHM) to Electronic Systems , Peter Sandborn and Chris Wilkinson , Microelectronics Reliability, Vol. 47, No. 12, pp. 1889-1901 , Dec. 2007.

Life Cycle Cost Impact of using Prognostic Health Management (PHM) for Helicopter Avionics , E. Scanff, K.L. Feldman, S. Ghelam, Peter Sandborn, M. Glade, B. Fouch, Microelectronics Reliability 47 (2007) 1857-1864, 2007.

Introduction to Special Section on Electronic Systems Prognostics and Health Management , M. Pecht and Peter Sandborn, Microelectronics Reliability, Vol. 47, No. 12, pp. 1847-1848, December 2007.

Evaluation of Electrochemical Migration on Printed Circuit Boards with Lead-Free and Tin-Lead Solder, X. He, M. Azarian, and M. Pecht, Journal of Electronic Materials, Vol. 36, No. 2, February 2007.

Enhanced Reliability Modeling of RAID Storage Systems, Jon G. Elerath and Michael Pecht, Dependable Systems and Networks, pp.175-184 , 2007.

Analysis of Solder Joint Failure Criteria and Measurement Techniques in the Qualification of Electronic Products, H. Qi, N. Vichare, M. Azarian, and M. Pecht, IEEE Transactions on Components and Packaging Technologies, 2007.

Design of Experiments for Board Level Solder Joint Reliability of PBGA Package under Various Manufacturing and Multiple Environmental Loading Conditions, H. Qi, M. Osterman, and M. Pecht, IEEE Transactions on Electronics Packaging Manufacturing, 2007.

High Cycle Cyclic Torsion Fatigue of PBGA Pb-Free Solder Joints, H, Qi, Q, Zhan, E. Tinsley, M. Osterman, and M Pecht, IEEE Transactions on COmponents and Packaging Technologies, 2007.

Advanced Electronic Prognostics Through System Telemetry and Pattern Recognition Methods, L. Lopez, Microelectronics Reliability, Vol. 47, Issue 12, PP. 1865 - 1873, December, 2007.

Environment and Usage Monitoring of Electronic Products for Health Assessment and Product Design, N. Vichare, P. Rodger, V. Eveloy, and M. Pecht, International Journal of Quality Technology and Quantitative Management, 2007.

Using Embedded Resistor Emulation and Trimming to Demonstrate Measurement Methods and Associated Engineering Model Development, P. Sandborn and P. Sandborn, International Journal of Engineering Education, 2007.

Life Expectancies of Pb-free SAC Solder Interconnects in Electronic Hardware, M. Osterman and A. Dasgupta, Lead-free Electronic Solders, A Special Issue of Journal of Materials Science: Materials in Electronics,, Springer, pp. 229-236, 2007.

Semiconductor Manufacturers' Efforts to Improve Trust in the Electronic Part Supply Chain,Chatterjee, K. and Das, D., Components and Packaging Technologies, IEEE Transactions on , vol.30, no.3, pp.547-549, Sept. 2007.

Carbon Fiber-Based Grid Array Interconnects, Y. Deng, M. Pecht, J. Swift, and S. Wallace, IEEE Transactions on Components and Packaging Technologies, Vol. 30, No. 4, pp. 716-723, Dec, 2007.

Strain Range Fatigue Life Assessment of Lead-free Solder Interconnects Subject to Temperature Cycle Loading, M. Osterman and M. Pecht, Soldering & surface Mount Technology, Vol. 19, No. 2, pp. 12-17, 2007.

Multivariate State Estimation Technique for Remaining Useful Life Prediction of Electronic Products, S. Cheng and M. Pecht, AAAI Fall Symposium on Artificial Intelligence for Prognostics, pp. 26-32, Arlington, VA, Nov, 2007.

Health Monitoring of Electronic Products Using Symbolic Time Series Analysis, S. Kumar and M. Pecht, AAAI Fall Symposium on Artificial Intelligence for Prognostics, pp. 73-80, Arlington, VA, Nov, 2007.

Support Vector Prognostics Analysis of Electronic Products and Systems, V. Sotiris and M. Pecht, AAAI Fall Symposium on Artificial Intelligence for Prognostics, pp. 120-127, Arlington, VA, Nov, 2007.

Assessment of China's and India's Science and Technology Literature - Introduction, Background, and Approach Technological Forecasting and Social Change, R. Kostoff, S. Bhattacharya, and M. Pecht, Technological Forecasting and Social Change, Vol. 74, Issue 9, pp. 1519-1538, November 2007.

Chinese science and technology - Structure and infrastructure Technological Forecasting and Social Change, R. Kostoff, M. Briggs, R. Rushenberg, C. Bowles, A. Icenhour, K. Nikodym, R. Barth, and M.l Pecht, Technological Forecasting and Social Change, Vol. 74, Issue 9, pp. 1539-1573, November 2007.

Comparisons of the structure and infrastructure of Chinese and Indian Science and Technology Technological Forecasting and Social Change, R. Kostoff, M. Briggs, R. Rushenberg, C. Bowles, M. Pecht, D. Johnson, S. Bhattacharya, A. Icenhour, K. Nikodym, R. Barth, and S. Dodbele, Technological Forecasting and Social Change, Vol. 74, Issue 9, pp. 1609-1630, November 2007.

Prognostics Implementation of Electronics under Vibration Loading, J. Gu, D. Barker and M. Pecht, Microelectronics Reliability, Vol. 47, Issue 12, pp. 1849-1856, Dec. 2007.

Creep and Stress Relaxation of Hypo-Eutectic Sn3.0Ag0.5Cu Pb-free Alloy: Testing and Modeling, G. Cuddalorepatta and A. Dasgupta, 2007 ASME International Mechanical Engineering Congress and Exposition, Seattle, Washington, November 11-17, 2007.

Vibration Durability Assessment of Sn3.0Ag0.5Cu & Sn37Pb SOlders under Harmonic Excitation, Y. Zhou and A. Dasgupta, 2007 ASME International Mechanical Engineering Congress and Exposition, Seattle, Washington, November 11-17, 2007.

Uncertainty Assessment of Prognostics of Electronics Subject to Random Vibration, J. Gu, D. Barker, and M. Pecht, AAAI Fall Symposium on Artificial Intelligence for Prognostics, pp.50-57, 2007.

Embedded Remaining Life Prognostics and Diagnostics of Electronics, V. Rouet, A. Delye, N. Vichare, M. Pecht, and B. Foucher, MicroNanoReliability Congress, Berlin, Germany, September 2-5, 2007.

Thermo-optical modeling of polymer fiber Bragg grating illuminated by light emitting diode, Kyoung Joon Kim, Avram Bar-Cohen and Bongtae Han, International Journal of Heat and Mass Transfer, Vol 50, 5241-5248, 5 September, 2007.

Phase-shifting in achromatic moire interferometry system, Changwoon Han and Bongtae Han, Optics Express, Vol 15, No 16, 9970-9976, 24 July, 2007.

Isothermal Aging Effects on Flex Cracking of Multilayer Ceramic Capacitors with Standard and Flexible Terminations, M. Keimasi, M. Azarian, and M. Pecht, Microelectronics Reliability, Vol. 47, pp. 2215-2225, 2007.

Prognostics of Ceramic Capacitor Temperature-Humidity-Bias Reliability Using Mahalanobis Distance Analysis, L. Nie, M. Azarian, M. Keimasi, and M. Pecht, Circuit World, Vol. 33, No.3, pp. 21-28, 2007.

Tin Whiskers: How to Mitigate and Manage the Risks, S. Mathew, M. Osterman, T. Shibutani, Q. Yu and M. Pecht, Proceedings of the International Symposium on High Density Packaging and Microsystem Integration, pp.1-8, Shanghai, China, June 26-28, 2007.

Technology Assessment of Sensor Systems for Prognostics and Health Monitoring, B. Tuchband, S. Cheng, and M. Pecht, IMAPS on Military, Aerospace, Space and Homeland Security: Packaging Issues and Applications (MASH), May, 2007.

New Methods to Predict Reliability of Electronics, J. Gu and M. Pecht, Proceedings of the Seventh International Conference on Reliability, Maintainability and Safety, pp 440-451, 2007.

Energetic Material/Systems Prognostics, D. Han, M. Pecht, D. Anand, and R. Kavetsky, 53rd Annual Reliability & Maintainability Symposium (RAMS), Florida, 2007.

The Effect of Electrostatic Discharge on Electrical Overstress Susceptibility in a Gallium Arsenide MESFET-Based Device, V. Eveloy, Y. Hwang, and M. Pecht, IEEE Transactions on Device and Materials Reliability, Vol, 7, No. 1, pp. 200-208, March 2007.

Regulations and Market Trends in Lead-free and Halogen-free Electronics, L. Nie and M. Pecht, Circuit World, Vol. 33, NO. 2, pp. 4-9, 2007.

Plastic Ball Grid Array Solder Joint Reliability for Avionics Applications, H. Qi, M. Osterman, and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 30, No. 2, pp. 242-247, June 2007.

Reliability Assessment on Insertion Mount Assembly under Vibration Conditions, H. Qi, G. Plaza, S. Ganesan, M. Osterman, and M. Pecht, 2007 Electronic Components and Technology Conference, Reno, Nevada, pp. 407-414, May 29-June 1, 2007.

Assessment of Thermomechanical Damage of Electronic Parts Due to Solder Dipping as a Post-manufacturing Process, S. Sengupta, D. Das, S. Ganesan, W. Rollins, D. Pinsky, T. Lin and M. Pecht, IEEE Transactions on Electronics Packaging Manufacturing, Vol. 30, NO. 2, pp. 128-137, April, 2007.

Using a Reliability Capability Maturity Model to Benchmark Electronics Companies, S. Tiku and M. Pecht, International Journal of Quality & Reliability Management, Vol, 24, No. 5, pp. 547-563, 2007.

Virtual Remaining Life Assessment of Electronic Hardware Subjected to Shock and Random Vibration Life Cycle Loads, S. Mathew, D. Das, M. Osterman, M. Pecht, R. Ferebee, and J. Clayton, Journal of the IEST, Vol. 50, No. 1, pp 86-97, April 2007.

The Use of Prognostics in Military Electronic Systems, B. Tuchband and M. Pecht, Proceedings of the 32nd GOMACTech Conference, pp. 157-160, Lake Buena Vista, FL, March 19-22, 2007.

Contact Resistance Estimation for Time-Dependent Silicone Elastomer Matrix of Land Grid Array Socket, S. Yang, J. Wu, D. Tsai, and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 30, NO. 1, pp. 81-85, March 2007.

Assessment of Risk Resulting from Unattached Tin Whisker Bridging, T. Fang, S. Mathew, M. Osterman, and M. Pecht, Circuit World, Vol. 33, No. 1, pp. 5-8, 2007.

Durability of Repaired and Aged Lead-free Electronic Assemblies, A. Choubey, M. Osterman, M. Pecht, and D. Hillman, IPC Printed Circuits Expo, APEX, and Designers Summit, Los Angeles, CA. Feb 18-22, 2007.

An Enhanced Prognostic Model for Intermittent Failures in Digital Electronics, G. Zhang, C. Kwan, R. Xu, N. Vichare, and M. Pecht, IEEE Aerospce Conference, Big Sky, MT, March 2007.

Prognostics Implementation Methods for Electronics, J. Gu, N. Vichare, T. Tracy, and Michael Pecht, 53rd Annual Reliability & Maintainability Symposium (RAMS), Florida, 2007.

Advanced iterative algorithm for randomly phase-shifted interferograms with intra- and inter-frame intensity variations , Zhaoyang Wang and Bongtae Han, Optics and Lasers in Engineering, Vol 45, No 2, 274-280, February 2007.

Solving the Counterfeit Electronics Problem, K. Chatterjee, D. Das, and M. Pecht, Proceedings of Pan Pacific Microelectronics Symposium (SMTA), pp. 294-300, Hawaii, Jan 30-Feb 1, 2007.

The Impact of Electrical Current, Mechanical Bending, and Thermal Annealing on Tin Whisker Growth, Y. Fukuda, M. Osterman, and M. Pecht, Microelectronics Reliability, Vol. 47, Issue 1, pp. 88-92, January, 2007.

Test Methodology for Durability Estimation of Surface Mount Interconnects under Drop Testing Conditions, J. Varghese and A. Dasgupta, Microelectronics Reliability, Vol. 47, Issue 1, pp. 93-107, January, 2007.

 

Published in 2006

Back to the Top

---

Reliability of High Temperature Solder Alternatives, F. P. McCluskey, M. Dash, Z. Wang, and D. Huff, Microelectronics Reliability, Vol. 46, No. 9, pp. 1910-1914 (2006). DOI:  10.1016/j.microrel.2006.07.090

Ensemble Based Systems in Decision Making, R. Polikar, IEEE Circuits and Systems Magazine, PP. 21-45, Third Quarter, 2006.

Developments in Ambulatory Electrocardiography, V. Eveloy, Y. Liu and M. Pecht, Biomedical Instrumentation & Technology, Vol. 40, No. 3, pp. 238-245, May 2006.

Vibration Durability Comparison of Sn37Pb vs SnAgCu SOlders, Y. Zhou, E. Scanff, and A. Dasgupta, 2006 ASME International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 5-10, 2006.

Prognostics Assessment of Aluminum Support Structure on a Printed Circuit Board, S. Mathew, D. Das, M. Osterman, M. Pecht, and R. Ferebee, ASME Journal of Electronic Packaging, Vol. 128, Issue 4, pp. 339-345, December 2006.

Management of Information and Data Used for Failure Assessment of Printed Circuit Board Assembly, M. Ramot, D. Das, and M. Pecht, Proceedings of the IMAPS 2006 Conference, 2006.

The Effect of Annealing on Tin Whisker Growth, Y. Fukuda, M. Osterman, and M. Pecht, IEEE Transactions on Electronic Packaging Manufacturing, Vol. 29, No. 4, pp. 252-258, October 2006.

Enabling Electronic Prognostics Using Thermal Data, N. Vichare and M. Pecht, Proceedings of the 12th International Workshop on Thermal Investigation of ICs and Systems, Nice, Côte d'Azur, France, 27-29 September 2006.

Assessment of Ni/Pd/Au-Pd and Ni/Pd/Au-Ag Pre-Plated Lead-frame Packages Subject to Electrochemical Migration and Mixed Flowing Gas Tests, P. Zhao, M. Pecht, S. Kang, and S. Park, IEEE Transactions on Components and Packaging Technologies, Vol. 29, No. 4, pp. 818-826, December, 2006.

Analysis of Phosphorus Flame Retardant Induced Leakage Currents in IC Packages Using SQUID Microscopy, Y. Deng, M. Pecht, and K. Rogers, IEEE Transactions on Components and Packaging Technologies, Vol. 29, No. 4, pp. 804-808, December, 2006.

Uprating of Electronic Parts to Address Obsolescence, M. Pecht and D. Humphrey, Microelectronics International, Vol. 23, No. 2, pp 32-36, 2006.

Impact of Environmental Regulations on Green Electronics Manufacture, R. Ciocci and M. Pecht, Microelectronics International, Vol. 23, No. 2, pp 45-50, 2006.

The Influence of Substrate Enhancement on Moisture Sensitivity Level (MSL) Performance for Green PBGA Packages, T. Lin, M. Pecht, D. Das, and K. Teo, IEEE Transactions on Components and Packaging Technologies, Vol. 29, No. 3, pp. 522- 527, July 2006.

Establishing a Relationship Between Warranty and Reliability, M. Pecht, IEEE Transactions on Electronics Packaging Manufacturing, Vol. 29, No. 3, pp. 184- 190, July 2006.

Surface Insulation Resistance of Conformally Coated Printed Circuit Boards Processed With No-Clean Flux, S. Zhan, M. Azarian, and M. Pecht, IEEE Transactions on Electronics Packaging Manufacturing, Vol. 29, No. 3, pp. 217-233, July 2006.

Forecasting the Cost of Unreliability for Products with Two-Dimensional Warranties, A. Kleyner and P. Sandborn, Proceedings of the European Safety and Reliability Conference (ESREL), Estoril, Portugal, Sept 18-22, 2006.

A Methodology for Assessing the Remaining Life of Electronic Products, S. Mathew, P. Rodgers, V. Eveloy, N. Vichare, and M. Pecht, International Journal of Performability Engineering, Vol. 2, No. 4, pp. 383-395, October, 2006.

Low Temperature Electrical Measurements of Silicon Bipolar Monolithic Microwave Integrated Circuit (MMIC) Amplifiers, M. Keimasi, S. Ganesan, and M. Pecht, Microelectronics Reliability, Vol. 46, pp. 326-334, 2006.

Characterization of stresses and strains in microelectronics and photonics devices using photomechanics methods, Bongtae Han, Micro-and Opto-Electronic Materials and Structures,Chap 14, 1-48, 5 September, 2006.

Use of High Temperature Operating Life Data to Mitigate Risks in Long-Duration Space Applications that Deploy Commercial-Grade Plastic Encapsulated Semiconductor Devices, S. Ganesan, M. Pecht, and S. Ling, Microelectronics Reliability, Vol. 46, pp. 360-366, 2006.

The Other Half of the DMSMS Problem - Software Obsolescence, P. Sandborn and G. Plunkett, DMSMS Knowledge Sharing Portal Newsletter, Vol. 4, Issue 4, pp. 3 and 11, June 2006.

Obsolescence Driven Design Refresh Planning for Sustainment-Dominated Systems, P. Singh and P. Sandborn, The Engineering Economist, Vol. 51, No. 2, pp. 115-139, April-June 2006.

Bogus: Electronic Manufacturing and Consumers Confront a Rising Tide of Counterfeit Electronics, M. Pecht, S. Tiku, IEEE Spectrum Vol. 43, No. 5, pp. 37 – 46, May 2006.

Using Reverse Engineering as a Vehicle to Teach Electronic Systems Manufacturing Cost Modeling, P. Sandborn, J. Myers, T. Barron, and M. McCarthy, Proceedings of the International Electronics Packaging Education Conference (at the Electronic Components and Technology Conference), May 30, 2006.

Optimization of Test/Diagnosis/Rework Location(s) and Characteristics in Electronic System Assembly, Z. Shi and P. Sandborn, Journal of Electronic Testing Theory and Applications (JETTA), Vol. 22, pp. 49-60, 2006.

Contact Resistance and Fretting Corrosion of Lead-free Alloy Coated Electrical Contacts, J. Wu and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 29, No. 2, pp. 402-410, June, 2006.

Durability of Pb-Free Solder Connection between Copper Interconnect Wire and Crystalline Silicon Solar Cells, G. Cuddalorepatta, A. Dasgupta, S. Sealing, J. Moyer, T. Tolliver, and J. Loman, ITHERM Conference, San Deigo, CA, May 30, 2006.

Investigation of the Size and Spatial Distribution of Fillers in Mold Compounds after Device Packaging, Y. Huang, D. Bigio, and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 29, No. 2, pp. 364-370, June, 2006.

Statistical Analysis of Tin Whisker Growth, T. Fang, M. Osterman, and M. Pecht, Microelectronics Reliability, Vol. 46, Issues 5-6, pp. 846-849, May-June, 2006.

A Strain Range Based Model for Life Assessment of Pb-free SAC Solder Interconnects , M. Osterman, A. Dasgupta, B. Han, 56th Electronic Component and Technology Conference, pp. 884 - 890, May 30-June 2, 2006.

Learning from the Migration to Lead-free Solder, R. Ciocci and M. Pecht, Soldering & Surface Mount Technology, Vol. 18, No. 3, 2006.

Methods for Binning and Density Estimation of Load Parameters for Prognostics and Health Management, Vichare N., Rodgers P., and Pecht, M., International Journal of Performability Engineering, Vol. 2, No. 2, pp. 149-161, April 2006.

Prognostics and Health Management of Electronics , N. Vichare and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 29, No. 1, pp. 222-229, March 2006.

A Variant of Conductive Filament Formation Failures in PWBs with 3 and 4 mil Spacings, K. Rogers and M. Pecht, Circuit World, Vol. 32, No. 3, pp. 11-18, 2006.

Assessing Tin Whisker Risk in Electronic Products, T. Fang, S. Mathew, M. Osterman, and M. Pecht, SMT Magazine, PennWell, Vol. 20, No.5, pp 24-25, May 2006.

Tin Whisker Risk Assessment, T. Fang, M. Osterman, S. Mathew, and M. Pecht, Circuit World, Vol. 32, No. 3, pp 25-29, May. 2006.

Durability of Pb-Free Solder Connection between Copper Interconnect Wire and Crystalline Silicon Solar Cells - Experimental Approach, G. Cuddalorepatta, A. Dasgupta, S. Sealing, J. Moyer, T. Tolliver, and J. Loman, Capacitor and Resistor Technology Symposium, Orlando, FL, pp. 15-25, April 3-6, 2006.

Lead-Free Assemblies in High Temperature Applications, A. Choubey, J. Wu, S. Ganesan, and M. Pecht, Proceeding of IMAPS International Conference on High Temperature Electronics (HITECH 2006), pp. 384-389, May 2006.

Effect of Aging on Pull Strength of SnPb, SnAgCu and Mixed Solder Joints in Peripheral Surface Mount Components, A. Choubey, D. Menschow, S. Ganesan, and M. Pecht, Journal of SMTA, Vol. 19, Issue 2, pp. 33-37, April 2006.

Moisture Induced Degradation of Multilayer Ceramic Capacitors, D. Donahoe, M. Pecht, I. Lloyd, and S. Ganesan, Microelectronics Reliability, Vol. 46, pp. 400-408, 2006.

Comparison of Flex Cracking of Multilayer Ceramic Capacitors Assembled with Lead-Free and Eutectic Tin-Lead Solders, M. Azarian, M. Keimasi, and M. Pecht, Capacitor and Resistor Technology Symposium, Orlando FL, pp. 15-25, April 3-6, 2006.

High sensitivity shadow moire using nonzero-order Talbot distance, C.-W. Han and B. Han, Experimental Mechanics, Vol 46, 543-554, 15 March, 2006.

Predicting Plated Through Hole Life at Assembly and in the Field from Thermal Stress Data, M. Freda and D. Barker, IPC-APEX Exposition, Anaheim, California, February 8-10, 2006.

Non-Destructive Techniques for Detection of Defects in Multilayer Ceramic Capacitors, M. Azarian, M. Keimasi, and M. Pecht, Components for Military and Space Electronics Conference, pp. 125-130, Los Angeles, CA, February 6-9, 2006.

Error analysis of the phase-shifting technique when applied to shadow moire, Changwoon Han and Bongtae Han, Applied Optics, Vol 45, No 6, 1124-1133, 20 February, 2006.

Implementation of Six Sigma Quality System in Celestica with Practical Examples, L. Ladani, D. Das, J. Cartwright, R. Yenkner, and J. Razmi, Int. J. Six Sigma and Competitive Advantage, Vol. 2, No. 1, pp. 69-88, 2006.

Open Trace Defects in FR4 Printed Circuit Boards, S. Ganesan and M. Pecht, Circuit World, Vol. 32, No. 1, pp. 3-7, 2006.

Electronic Device Encapsulation Using Red Phosphorus Flame Retardants, M. Pecht and Y. Deng, Microelectronics Reliability, Vol. 46, Issue 1, pp. 53-62, January 2006.

Failures in Semiconductor Device Encapsulated with Red Phosphorus Flame Retardant, Y. Deng and M. Pecht, 11th Annual Pan Pacific Microelectronics Symposium and Tabletop Exhibition, pp. 399-404, January 17-19, 2006. 

 

Published in 2005

Back to the Top

---

The Role of the U.S National Highway Traffic Safety Administration in Automotive Electronics Reliability and Safety Assessment, Michael Pecht, Arun Ramakrishnan, Jeffrey Fazio, and Carl E. Nash IEEE Transactions on Components andPackaging Technologies, Vol. 28, No. 3, pp. 571-580 , September 2005, DOI:10.1109/TCAPT.2005.851597.

Solder Joint Defects of PBGs after Lead-free Assembly Ganesan S., Kim G., Wu J., Pecht M., Lee R., Lo J., Fu Y., Li Y., Xu M., Felba J., 15th European Microelectronics and Packaging Conference & Exhibition, Brugge, p. 63-68, 2005.

A novel test data-acquisition system for vibration testing of printed circuit board assemblies Urbanski K., Falat T., Felba J., Ganesan S., Pecht M., 15th European Microelectronics and Packaging Conference & Exhibition, Brugge, p. 178-183, 2005.

Vibration test utilization in the study of reliability of connections in microelectronics, Matkowski P., Haiyu Q.,2005 International Students and Young Scientists Workshop Photonics and Microelectronics, p.61-64, Dresden 2005.

Vibration Tests Utilization in the Study of Reliability of Connections in Microelectronics, P. Matkowski and H. Qi, 2005 International Students and Young Scientists Workshop "Photonics and Microsystems", pp. 61-64, July 7-8, 2005.

Using Cut-Out Features for Efficient Printed Circuit Board Testing and Failure Analysis, J. Wu and S. Ganesan, IEEE Transactions on Components and Packaging Technologies, Vol. 28, No. 1, pp. 166-168, March 2005.

Guidelines for Drop Testing of Portable Electronic Products Using a Bottom-Up Approach, J. Varghese, J. Okura, K. Ojala, and A. Dasgupta, Proceedings of the JEDEX Semiconductor Conference, 2005.

Drop Testing of Printed Wiring Assemblies, J. Varghese and A. Dasgupta, Proceedings of the IEEE Workshop on Accelerated Stress Testing and Reliability (ASTR), 2005.

Characterization of Non-Conductive Adhesives, D. Farley, A. Dasgupta, and J. Caers, Proceedings of ASME InterPACK, July 17-22, 2005.

Characterizing Non-Conductive Adhesives using Finite Element Analysis: Residual Stress Determination,D. Farley, A. Dasgupta, and J. Caers, Proceedings of SEM Annual Conference and Exposition, June 7-9, 2005.

Cyclic Mechanical Durability Of Sn3.0Ag0.5Cu Pb-Free Solder Alloy, G. Cuddalorepatta and A. Dasgupta, ASME International Mechanical Engineering Congress and RD&D Expo, Orlando, FL, November 5-11, 2005.

Effects of Re-Finishing of Terminations by Solder-Dipping on Plastic Quad Flatpack Electronic Parts, S. Sengupta, D. Das, S. Ganesan, and M. Pecht, EPTC Annual Conference, Singapore, December 2005.

Risk Factors in Oil and Gas Well Electronics Compared to Other Electronic Industries, S. Tiku, A. Veneruso, R. Etchells, and M. Pecht, Oil & Gas Science and Technology - Rev. IFP, Vol. 60 (2005), No. 4, pp. 721-730, Institut Fran?aise;ais du Pètrole, 2005.

The Story Behind the Red Phosphorus Mold Compound Device Failures, Y. Deng and M. Pecht, 2005 International Symposium on Electronics Materials and Packaging (EMAP2005), pp. 1-5, Tokyo, Japan, December 11-14, 2005.

Lead-free Assembly Defects in Plastic Ball Grid Array Packages, S. Ganesan, G. Kim, J. Wu, M. Pecht, and J. Felba, 5th International Conference on Polymers and Adhesives in Microelectronics and Photonics, pp. 219-223, Wroclaw, Poland, October 23-26, 2005.

Effects of Printed Circuit Board Materials on Lead-free Interconnect Durability, H. Qi, S. Ganesan, J. Wu, M. Pecht, P. Matkowski, and J. Felba, 5th International Conference on Polymers and Adhesives in Microelectronics and Photonics, pp. 140-144, Wroclaw, Poland, October 23-26, 2005.

Identification and Utilization of Failure Mechanisms to Enhance FMEA and FMECA, S. Ganesan, V. Eveloy, D. Das, and M. Pecht, Proceedings of the IEEE Workshop on Accelerated Stress Testing and Reliability (ASTR), Austin, Texas, October 2-5, 2005.

Characterization of Non-Conductive Adhesives, D. Farley, A. Dasgupta, J. Caers, and W. Hua, Proceedings of 6th International Conference on Thermal & Mechanical Simulation and Experiments in Micro-electronics and micro-systems, April 17-20, 2005.

Environment and Usage Monitoring of Electronic Products for Health Assessment and Product Design, N. Vichare, P. Rodgers, V. Eveloy, and M. Pecht, IEEE Workshop on Accelerated Stress Testing and Reliability (ASTR), Austin, TX, USA, October 2-5, 2005.

Beyond Tools: A Design for Environment Process, D.P. Fitzgerald, J.W. Herrmann, P.A. Sandborn, L.C. Schmidt, and T.H. Gogoll, International Journal of Performability Engineering, Vol. 1, No. 2, pp. 105-120, October 2005.

A Tin Whisker Risk Assessment Algorithm, T. Fang, M. Osterman, and M. Pecht, 38th International Symposium on Microelectronics, Reliability I, Issues in Packaging, pp. 61-65, Philadelphia, PA, September 25-29, 2005.

Non-invasive Electrocardiogram and Blood Pressure Monitors for Cardiovascular Disease, Y. Liu, V. Eveloy, and M. Pecht, 38th International Symposium on Microelectronics, Sensor and MEMS Packaging, pp. 66-74, Philadelphia, PA, September 25-29, 2005.

Carbon Fiber Electrical Interconnects, Y. Deng, J. Wu, and M. Pecht, 38th International Symposium on Microelectronics, Emerging Technologies, pp. 169-176, Philadelphia, PA, September 25-29, 2005.

Reliability Issues of No-Clean Flux Technology with Lead-Free Solder Alloy for High Density Printed Circuit Boards, S. Zhan, M. Azarian, and M. Pecht, 38th International Symposium on Microelectronics, pp. 367-375, Philadelphia, PA, September 25-29, 2005.

Electrochemical Migration of Land Grid Array Sockets under Highly Accelerated Stress Conditions, S. Yang, J. Wu, and M. Pecht, The Fifty-First IEEE Holm Conference on Electrical Contacts, pp. 238-244, September 2005.

Numerical Heat Transfer Predictive Accuracy for an In-Line Array of Board-Mounted PQFP Components in Free Convection, V. Eveloy, P. Rodgers and M. Hashmi, Transactions of the ASME, Journal of Electronic Packaging, Vol. 127, No. 3, pp. 245-254, September 2005.

Prediction of Electronic Component-Board Transient Conjugate Heat Transfer, V. Eveloy and P. Rodgers, IEEE Transactions on Components and Packaging Technologies, Vol. 28, No. 4, pp. 817-829, December 2005.

Distribution of a Minor Solid Constituent in a Transfer Molded e-Pad Lead-frame Package, Y. Huang, S. Zhan, D. Bigio, and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 28, No. 3, pp. 549-554, September 2005.

A Warranty Forecasting Model Based on Piecewise Statistical Distributions and Stochastic Simulation, A. Kleyner and P. Sandborn, Reliability Engineering and System Safety, Vol. 88, No. 3, pp. 207-214, June 2005.

Environmental Qualification Testing Assessment and Failure Analysis of Embedded Resistors, L.J. Salzano II, C. Wilkinson, and P. Sandborn, IEEE Transactions on Advanced Packaging, Vol. 28, No. 3, pp. 503-520, 2005.

Tin Whiskers: What's the Risk?, Y. Fukuda and M. Osterman, Lead Free Electronics, PennWell, June 2005.

Mixed Flowing Gas Studies of Creep Corrosion on Plastic Encapsulated Microcircuit Packages with Noble Metal Pre-Plated Lead-frames, P. Zhao, and M. Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 5, No. 2, pp. 268-276, June 2005.

Key Concerns in the Assembly of Lead-Free Electronics, V. Eveloy, Y. Fukuda, S. Ganesan, J. Wu, and M. Pecht, Proceedings IMAPS Taiwan 2005 International Technical Symposium, pp. 167-183, June 2005.

New Aging Mechanism in Multilayer Ceramic Capacitators, D. Dohahoe and M. Pecht, Advanced Packaging, June 2005.

The Evaluation of Copper Migration During the Die Attach Curing and Second Wire Bonding Process, T. Lin, M. Pecht, D. Das, J. Pan, and W. Zhu, IEEE Transactions on Components and Packaging Technologies, Vol. 28, Issue. 2, pp. 337-344, June 2005.

Effect of Stress Relaxation on Board Level Reliability of Sn Based Pb-Free Solders, S. Yoon, Z. Chen, M. Osterman, B. Han, and A. Dasgupta, 55th ECTC, pp. 1210-1214, June 2005.

An Assessment of Embedded Resistor Trimming and Rework, P. Sandborn, IEEE Transactions on Electronics Packaging Manufacturing., Vol. 28, No. 2, pp. 176- 186, April 2005.

A Data Mining Based Approach to Electronic Part Obsolescence Forecasting, P. Sandborn, F. Mauro, and R. Knox,Proceedings DMSMS Conference, Nashville, TN, April 2005.

Heart Sound Measurement and Analysis in Cardiovascular Disease Assessment, V. Eveloy, Y. Liu, and M. Pecht, Proceedings of the SMTA Medical Electronics Symposium, Minneapolis, MN, April 25-27, 2005.

Chinese Intellectual Property and Contractual Challenges, Y. Liu, P. Campbell, D. Das, and M. Pecht, International Conference on Electronics Packaging (ICEP), pp. 241-246, Japan, April 13-15, 2005.

Extending the Limits of Air-Cooling in Microelectronic Equipment, P. Rodgers, V. Eveloy, and M. Pecht, 6th International Conference on Thermal, Mechanical and Multi-physics Simulation and Experiments in Micro-Electronics and Micro-Systems, pp. 695-702, EuroSimE, April 2005.

Room Temperature Soldering of Microelectronic Components for Enhanced Thermal Performance, J. Subramanian, P. Rodgers, J. Newson, T. Rude, Z. He, E. Besnoin, T.P. Weihs, V. Eveloy, and M. Pecht, 6th International Conference on Thermal, Mechanical and Multi-physics Simulation and Experiments in Micro-Electronics and Micro-Systems, pp. 681-686, EuroSimE, April 2005.

Development of Predictive Modeling Scheme for Flip-Chip on Fine Pitch Flex Substrate, C. Jang, S. Han, Y. Kim, and H. Kim, S. Yoon, S. Cho, C. Han, and B. Han, 6th International Conference on Thermal, Mechanical and Multi-physics Simulation and Experiments in Micro-Electronics and Micro-Systems, pp. 566-574, EuroSimE, April 2005.

Hybrid Experimental and Computational Approach for Rate Dependent Mechanical Properties Using Indentation Techniques, J. Varghese, G. Radig, D. Herkommer, and A. Dasgupta 6th International Conference on Thermal, Mechanical and Multi-physics Simulation and Experiments in Micro-Electronics and Micro-Systems, pp. 510-514, EuroSimE, April 2005.

Characterization of Non-Conductive Adhesives, D. Farley, A. Dasgupta, J. Caers, and W. Hua, 6th International Conference on Thermal, Mechanical and Multi-physics Simulation and Experiments in Micro-Electronics and Micro-Systems, pp. 471-477, EuroSimE, April 2005.

Assessment of Long-term Reliability in Lead-free Assemblies, S. Ganesan, J. Wu, and M. Pecht, International Conference on Asian Green Electronics, Session 3, pp. 140-155, Shanghai, China, March 15-18, 2005.

An Investigation into the Potential of Low-Reynolds Number Eddy Viscosity Turbulent Flow Models to Predict Electronic Component Operational Temperature, P. Rodgers, V. Eveloy, and M. Hashmi, Transactions of the ASME, Journal of Electronic Packaging, Vol. 127, Issue 1, pp. 67-75, March 2005.

Limits of Air-Cooling: Status and Challenges, P. Rodgers, V. Eveloy, and M. Pecht, IEEE Twenty First Annual - Semiconductor Thermal Measurement and Management Symposium, pp. 116-124, March 15-17, 2005.

Contrast of shadow moire at high-order Talbot, Changwoon Han and Bongtae Han Optical Engineering, Vol 44, No 2, February, 2005.

Inverse method to determine elastic constants using a circular disk and moire interferometry, Z. Wang, J.F. Curdenas-Garcia and B. Han Society for Experimental Mechanics, Vol 45, No 1, February, 2005.

A Decision Support Model for Determining the Applicability of Prognostic Health Management (PHM) Approaches to Electronic Systems, P. Sandborn, Proc. Reliability and Maintainability Symposium, pp. 422-427, January 24-27, 2005.

A Decision Support Model for Determining the Applicability of Prognostic Health Management (PHM) Approaches to Electronic Systems, P. Sandborn, Proceedings Reliability and Maintainability Symposium, pp. 422-427, January 24-27, 2005.

Forecasting Technology Insertion Concurrent with Design Refresh Planning for COTS-Based Electronic Systems, P. Singh and P. Sandborn, Proceedings Reliability and Maintainability Symposium, pp. 349-354, January 24-27, 2005.

 

Published in 2004

Back to the Top

---

Real-time observation of thermally induced warpage of flip-chip package using far-infrared Fizeau interferometry, K. Verma and B. Han, Society for Experimental Mechanics, Vol 44, No 6, 628-633, December 2004.

Characterization of flexural and thermo-mechanical behavior of plastic ball grid package assembly using moire interferometry, Jinwoo Joo, Seungmin Cho and Bongtae Han, Microelectronics Reliability, Vol 45, 637-646, December 2004.

Beyond Reactive Thinking - " We Should be Developing Pro-Active Approaches to Obsolescence Management Too!, Peter Sandborn, DMSMS Center of Excellence Newsletter, , Vol. 2, Issue 4, July 2004.

Electronic Part Obsolescence Driven Product Redesign Planning, Pameet Singh, Peter Sandborn, Todd Geiser, David Lorenson, International Journal of Advanced Manufacturing Systems, , 2004.

Failure Analysis and Virtual Qualification of PBGA Under Multiple Environmental Loadings, H. Qi, C. Wilkinison, M. Osterman, and M. Pecht, Electronic Components and Technology Conference, Proceedings. 54th, Vol, 1. No. 1-4, pp. 413-420, June 2004.

Electromagnetic Interference (EMI) Reduction from Printed Circuit Boards (PCB) Using Electromagnetic Bandgap Structures, S. Shahparnia, O. Ramahi, IEEE Transactions on Electromagnetic Compatibility, Vol. 46, Issue 4, pp. 580-587, November 2004.

Virtual Qualification of a Plastic Encapsulated DC-DC Converter, K. Ghosh, B. Willner, and P. McCluskey, 2004 IEEE 35th Annual Power Electronics Specialists Conference, Vol. 4, pp. 2578-2582, 2004.

Contact Resistance and Fretting Corrosion of Lead-Free Alloy Coated Electrical Contacts, J. Wu and M. Pecht, Proceedings of 2004 International IEEE Conference on Asian Green Electronics, pp. 127-125, 2004.

The Impact of Lead-Free Legislation Exemptions on the Electronics Industry, M. Pecht, Y. Fukuda and S. Rajagopal, IEEE Transactions on Electronics Packaging Manufacturing, Vol. 27, No. 4, pp. 221-232, October 2004.

Understanding and Validating Practical EMI/EMC Antennas Using Numerical Codes, S. Shahparnia, M. Kermani, O. Ramahi, International Symposium on Electromagnetic Compatibility, Vol. 2, pp. 691-696, August 9-13, 2004.

Electromagnetic Noise Mitigation in High-Speed Printed Circuit Boards and Packaging Using Electromagnetic Band Gap Structures, S. Shahparnia, B. Mohajer-Iravani, and O. Ramahi, Proceedings Electronic Components and Technology, Vol. 2, pp. 1831-1836, June 1-4, 2004.

Miniaturized Electromagnetic Band-gap Structures for Ultra-Wide Band Switching Noise Mitigation in High-Speed Printed Circuit Boards and Packages, S. Shahparnia, O. Ramahi, IEEE 13th Topical Meeting on Electrical Performance of Electronic Packaging, pp. 211-214, October. 25-27, 2004.

An Efficient Optimization Method for the Reconstruction of Multiple Profiles, F. Seydou, T. Seppanen, and O. Ramahi, IEEE Antennas and Propagation Society Symposium, Vol. 1, pp. 209-212, June 20-25, 2004.

Concurrent Complementary Operators Method for the Absorption of Evanescent Waves in Frequency-Domain Finite Element Simulations [Waveguides], X. Wu, O. Ramahi, IEEE Antennas and Propagation Society Symposium, Vol. 1, pp. 387-390, June 20-25, 2004.

Complementary Operators Method for ADI-FDTD Open-Region Simulations, M. Kermani, O. Ramahi, IEEE Antennas and Propagation Society Symposium, Vol. 1, pp. 587-590, June 20-25, 2004.

Instable ADI-FDTD Open-Region Simulation, M. Kermani, X. Wu, and O. Ramahi, IEEE Antennas and Propagation Society Symposium, Vol. 1, pp. 595-598, June 20-25, 2004.

Coupled Stability Analysis for the Open-Region Finite-Difference Time-Domain Simulations, X. Wu and O. Ramahi, IEEE Antennas and Propagation Society Symposium, Vol. 1, pp. 599-602, June 20-25, 2004.

A Multipole Expansions Method for Acoustic Wave Propagation in Vocal Tract, F. Seydou, T. Seppanen, and O. Ramahi, IEEE Antennas and Propagation Society Symposium, Vol. 1, pp. 631-634, June 20-25, 2004.

Near-Field Scanning Microwave Microscopy for Detection of Subsurface Biological Anomalies, X. Wu and O. Ramahi, IEEE Antennas and Propagation Society Symposium, Vol. 3, pp. 2444-2447, June 20-25, 2004.

Simple and Accurate Circuit Models for High-Impedance Surfaces Embedded in Printed Circuit Boards, S. Shahparnia and O. Ramahi, IEEE Antennas and Propagation Society Symposium, Vol. 4, pp. 3565-3568, June 20-25, 2004.

High-impedance Surfaces Embedded in Printed Circuit Boards: Design Considerations and Novel Applications, S. Shahparnia and O. Ramahi, IEEE Antennas and Propagation Society Symposium, Vol. 4, pp. 3569 - 3572, June 20-25, 2004.

Electromagnetic Band-Gap Structures for Multi-band Mitigation of Resonant Modes in Parallel-Plate Waveguides, T. Kamgaing and O. Ramahi, IEEE Antennas and Propagation Society Symposiums, Vol. 4, pp. 3577-3580, June 20-25, 2004.

Computation of Green's Function for Finite-Size Photonic Crystals by Boundary Element Method, F. Seydou, O. Ramahi, R. Duraiswami, and T. Seppdnen, IEEE Antennas and Propagation Society Symposium, Vol. 4, pp. 4320 - 4323, June 20-25, 2004.

A Closed form Solution of the Helmholtz Equation for a Class of Chaotic Resonators, F. Seydou and O. Ramahi, IEEE Antennas and Propagation Society Symposium, Vol. 4, pp. 4440 - 4443, June 20-25, 2004.

Life Consumption Monitoring for Electronics Prognostics, S. Mishra, S. Ganesan, M. Pecht and J. Xie, Proceedings of the IEEE Aerospace Conference, Vol. 5, pp. 3455 - 3467, March 6-13, 2004.

Simultaneous Switching Noise Mitigation in PCB Using Cascaded High-Impedance Surfaces, S. Shahparnia and O. Ramahi, Electronic Letters, Vol. 40 Issue 2, pp. 98-100, January 22, 2004.

Reliability of Pressure-Sensitive Adhesive Tapes for Heat Sink Attachment in Air-Cooled Electronic Assemblies, V. Eveloy, P. Rodgers, and M. Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 4, No. 4, pp. 650-657, December 2004.

In Situ Temperature Measurement of a Notebook Computer - A Case Study in Health and Usage Monitoring of Electronics, N. Vichare, P. Rodgers, V. Eveloy, and M. Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 4, No. 4, pp. 658-663, December 2004.

Application of Numerical Analysis to the Optimisation of Electronic Component Reliability Screening and Assembly Processes, V. Eveloy, P. Rodgers, and M. Hashmi, Journal of Materials Processing Technology, Vol. 155-156, pp. 1788-1796, 2004.

Forecasting Technology Insertion Concurrent with Design Refresh Planning for COTS-Based Electronic Systems, P. Sandborn and P. Singh, Proceedings of the International Society of Logistics (SOLE) International Conference and Exhibition, Norfolk, VA, September 2004.

Avionics Architecture Approach to the Sustainable Utilization of Commercial Technology, C. Wilkinson, IEEE Aerospace and Electronic Systems Magazine, Vol. 19, No. 10, pp. 7-10, October 2004.

Prognostics and Health Management for Improved Dispatchability of Integrated Modular Avionics Equipped Aircraft, C. Wilkinson, 23rd Digital Avionics Systems Conference (DASC), Salt Lake City, UT, October 2004.

Effect of Heat Treatment on Tin Whisker Growth, Y. Fukuda, T. Fang, M. Pecht, and M. Osterman, Proceedings of the International SMTA Conference, pp. 717-723, Chicago, September 26-30, 2004.

Characterization of Hygroscopic Swelling Behaviour of Mold Compounds and Plastic Packages, E. Stellrecht, B. Han, and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol.27, No. 3, pp. 499-506, September 2004.

Fill Pattern and Particle Distribution of Underfill Material, Y. Hang, D. Bigio and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol.27, No. 3, pp. 493-498, September 2004.

Application of Health Monitoring to Product Take-Back Decisions, N. Vichare, P. Rodgers, M. Azarian, and M. Pecht, Proceedings of the Joint International Congress and Exhibition - Electronics Goes Green 2004, pp. 945-951, Berlin, Germany, September 6-8, 2004.

Why Gold Flash Can Be Detrimental to Long-Term Reliability, J. Xie, M. Sun, M. Pecht, and D. Barbe, ASME Journal of Electronic Packaging, Vol. 126, Issue 1, pp. 37-40, March 2004.

Prognostics and Health Management for Avionics, Wilkinson, C., Humphrey, D., Vermeire, B., and Houston, J., IEEE Aerospace Conference, Big Sky, MT, March 2004.

Application of In-Situ Health Monitoring and Prognostic Sensors, J. Xie and M. Pecht 9th Pan Pacific Microelectronics Symposium Exhibits and Conference, Kahuku, Oahu, Hawaii, 10-12 February 2004.

The Concurrent Complementary Operators Method Applied to Two-Dimensional Time-Harmonic Radiation and Scattering Problems, V. Chebolu, X. Wu, and O. Ramahi, IEEE Transactions Antennas Propagation, Vol. 53, No. 2, pp. 408-415, February 2004.

Simulation Model Development for Solder Joint Reliability for High Performance FBGA Assemblies, H. Qi, M. Osterman, M. Lee, K. Lee, O. Seyong, and T. Schmidt, 2004 IEEE 20th Annual Semiconductor Thermal Measurement and Management, pp. 300-307, March 9-11, 2004.

Accelerated Testing and Finite Element Analysis of PBGA Under Multiple Environmental Loadings, H. Qi, A. Ganesan, M. Osterman, and M. Pecht, 2004 International Conference, IEEE Business of Electronic Product Reliability and Liability, pp. 99-106, April 27-30, 2004.

Application of Low-Reynolds Number Turbulent Flow Models to the Prediction of Electronic Component Heat Transfer, P. Rodgers, and V. Eveloy, Proceedings of the Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronics Systems, pp. 495-583, 2004.

CFD Prediction of Electronic Component Operational Temperature on PCBs, P. Rodgers and V. Eveloy, Electronics Cooling, Vol. 10, No. 2, pp. 22-28, May 2004.

Design Challenges for High-Performance Heat Sinks used in Microelectronic Equipment: Evolution and Future Requirements, P. Rodgers, and V. Eveloy, Proceedings of the Fifth International Conference on Thermal and Mechanical Simulation and Experiments in Micro-Electronics and Micro-Systems, pp. 527-529, 2004.

Contact Discontinuity Modeling of Electromechanical Switches, J. Xie and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 27, No. 2, pp. 210-216, March 2004.

Numerical Prediction of Electronic Component Operational Temperature: A Perspective, V. Eveloy, P. Rodgers, and M. Hashmi, IEEE Transactions on Components and Packaging Technologies, Vol. 27, No. 2, pp. 269-282, June 2004.

Electronic Part Obsolescence Driven Product Redesign Planning, P. Singh, P. Sandborn, T. Geiser and D. Lorenson, International Journal of Advanced Manufacturing Systems, Vol. 7, No. 1, pp. 23-32, 2004.

Thermal Assessment of Glass-Metal Composition Plasma Display Panels Using Design of Experiments, M. Lee, M. Pecht, W. Lee, IEEE Transactions on Components and Packaging Technologies, Vol. 27, No. 1, pp. 210-216, March 2004.

Identification of Missing or Insufficient Electrolyte Constituents in Failed Aluminium Electrolytic Capacitors, C. Hillman and N. Helmold, 2004 Proceedings - 24th Capacitor and Resistor Technology Symposium, San Antonio, Texas, March 29 - April 1, 2004.

Has the Electronics Industry Missed the Boat on Pb-Free Failures in Ceramic Capacitors with Pb-Free Solder Interconnects, N. Blattau and C. Hillman, IPC/JEDEC 5th International Lead Free Conference on Electronic Components and Assemblies, San Jose, CA, March 18-19, 2004.

Lead Free Solder and Flex Cracking Failures in Ceramic Capacitors, N. Blattau, D. Barker, and C. Hillman, 2004 Proceedings - 24th Capacitor and Resistor Technology Symposium, San Antonio, Texas, March 29 - April 1, 2004.

Infrared diffraction interferometer for coplanarity measurement of high-density solder bump pattern, Mike Mello, Bongtae Han and Zhaoyang Wang, Society of Photo-Optical Instrumentation Engineers, Vol 43, No 4, 888-894, April, 2004.

Questions Concerning the Migration to Lead-Free Solder, R. Ciocci, and M. Pecht, Circuit World, Vol. 30, No. 2, pp. 34-40, 2004.

Assessing Lead-Free Intellectual Property, P. Casey and M. Pecht, Circuit World, Vol. 30, No. 2, pp. 46-51, 2004.

Failure Mechanisms in Electronic Products at High Altitudes, N. Blattau and C. Hillman, 2004 Proceedings - 8th Annual Commercialization of Military & Space Electronics Conference, Los Angeles, CA, February 9 - 12, 2004.

Minimization of Life Cycle Costs Through Optimization of the Validation Program - A Test Sample Size and Warranty Cost Approach, A. Kleyner, P. Sandborn, and J. Boyle, Reliability and Maintainability Symposium, Los Angeles, CA, January 2004.

Indium Soldering for a MOEMS Based Safety and Arming Device, M. Deeds and P. Sandborn, the 9 th Pan Pacific Microelectronics Symposium Exhibits & Conference, Kahuku, Oahu, Hawaii, February 2004.

Applications of In-Situ Health Monitoring and Prognostic Sensors, J. Xie and M. Pecht, the 9th Pan Pacific Microelectronics Symposium Exhibits & Conference, Kahuku, Oahu, Hawaii, 10-12 February, 2004.

Electrochemical Migration on HASL Plated FR-4 Printed Circuit Boards, E. Bumiller, M. Pecht and C. Hillman, Proceedings of 2004 SMTA Pan Pacific Microelectronics Symposium, Oahu, HI, pp. 201-205, February 11, 2004; Journal of Surface Mount Technology, Vol. 17, Issue 2, pp. 37-41, April-June 2004.

The Temperature Ratings of Electronic Parts, R. Mishra, M. Keimasi, and D. Das, Electronics Cooling, Vol. 10, No. 1, pp. 20-29, February 2004.

Load Characterization during Transportation, A. Ramakrishnan and M. Pecht, Microelectronics Reliability, Vol. 44, No. 2, pp. 333-338, February 2004.

 

Published in 2003

Back to the Top

---

Optimization of Test/Diagnosis/Rework Location(s) and Characteristics in Electronic Systems Assembly Using Real-Coded Genetic Algorithms, Zhen Shi and Peter Sandborn, Proceedings of the International Test Conference, October 2003.

Computer Aided Reliability Assessment, J. Wu, M. Pecht and J. Wang, Proceedings of the Fifth International Conference on Electronic Packaging Technology (ICEPT2003), pp. 36-39, October 28-30, 2003.

A Simple Finite-Difference Frequency-Domain (FDFD) Algorithm for Analysis of Switching Noise in Printed Circuit Boards and Packages, M. Ramahi, V. Subramanian, and B. Archambeault, IEEE Transactions on Advanced Packaging, Vol. 26, No. 2, pp. 191-198, May 2003.

Thermal stresses in microelectronics subassemblies: Quantitative characterization using photomechanics methods, Bongtae Han, Journal of Thermal Stresses, Vol. 26, 583-613, June 2003.

Optimization of Test/Diagnosis/Rework Location(s) and Characteristics in Electronic Systems Assembly Using Real-Coded Genetic Algorithms, Z. Shi and P. Sandborn, Proceedings Test Conference, Vol. 1, pp. 937-946, September 30 - October 2, 2003.

Strain Evaluation of Epoxy-Cured Fiber-Optic Connectors, K. Broadwater, D. Barker, P. Mead, J. Kolasinski, and J. Watkins, Journal of Lightwave Technology, Vol. 21, No. 7, pp. 1668-1675, July 2003.

Design Guidelines for Avoiding Flex Cracking in Ceramic Capacitors, C. Hillman, N. Blattau, and D. Barker, Global SMT and Packaging, Vol. 3, No. 1, pp. 18-21, January/February 2003.

Hygroscopic Swelling of Encapsulated Microcircuits - Part I, B. Han, E. Stellrecht, and M. Pecht, Advanced Packaging, pp. 31-35, June 2003.

Reliability Capability Assessment Methodology, S. Tiku and M. Pecht, Proceedings of IMAPS Brazil 2003, the International Technical Symposium on Packaging, Assembling and Testing & Exhibition, Campinas - SP, Brazil, August 6-8, 2003.

Organizational Reliability Capability, S. Tiku, M. Pecht, and J. Strutt, Proceedings of Canadian Reliability and Maintainability Symposium, Ottawa, Canada, October 16-17, 2003.

Evaluation of Selected Japanese Lead-Free Consumer Electronics, Y. Fukuda, P. Casey, and M. Pecht, IEEE Transactions on Electronics Packaging Manufacturing, Vol. 26, No. 4, pp. 305-312, October 2003.

Thermomechanical Analysis of Gold-Based SiC Die-Attach Assembly, K. Meyyappan, P. McCluskey, and L. Chen, Transactions on Device and Materials Reliability, Vol. 3, No. 4, pp. 152-158, December 2003.

Reliability Prediction Modeling of Semiconductor Light Emitting Device, J. Xie and M. Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 3, No. 4, pp. 218-222, December 2003.

An Investigation of the Contact Resistance of a Commercial Elastomer Interconnect Under Thermal and Mechanical Stresses, W. Liu, M. Lee, and M. Pecht, IEEE Transactions on Device and Materials Reliability, Vol. 3, No. 2, pp. 39-43, June 2003.

Determining the Lifetime of Silver-Filled Isotropic Conductive Adhesive (ICA) / Solder Plated Interconnections, N. Helmold, P. Iyer, and C. Hillman, Proceedings of the IMAPS Advanced Technology Workshop on Optoelectronic Device Packaging and Materials, Bethlehem, PA, October 2003.

Optimum Technology Insertion into Systems Based on the Assessment of Viability, P. Sandborn, T. Herald, J. Houston, and P. Singh, IEEE Transaction on Components and Packaging Technologies, Vol. 26, No. 4, pp. 734-738, December 2003.

Application of 3D Measurement System with CCD Camera in Microelectronics, M. Lee, M. Pecht J. Tyson, and I. CMD, Advanced Packaging, pp. 33-34, November 2003.

Methods for Predicting the Remaining Life of Electronic Assemblies with Carbon Nano-tubes and an Optical Transduction Technique, P. Casey, S. Ganesan, M. Pecht and D. Anand, Proceeding of IMECE' 03 - 2003 ASME International Mechanical Engineering Congress, Washington D.C., November 15-21, 2003.

Characterization of Anisotropic Conductive Adhesives, P. Iyer, P. Baumgaertner, D. Farley, and A. Dasgupta, Proceedings of ASME IMECE 2003 - 2003 ASME International Mechanical Engineering Congress and RD&D Expo, Washington, D.C., November 15-21, 2003.

Optimization of Test/Diagnosis/Rework Location(s) and Characteristics in Electronic Systems Assembly Using Real-Coded Genetic Algorithms, Z. Shi and P. Sandborn, Proceedings of the International Test Conference, October 2003.

Performance of Plated Additive Resistors, M. Wood, D. Fritz, D. Sawoska, F. Durso, L. Salzano, and P. Sandborn, Proceedings Taiwan Printed Circuit Association Meeting, October 2003.

Cost and Production Analysis for Substrates with Embedded Passives, P. Sandborn, B. Etienne, J. W. Herrmann, and M. M. Chincholkar, Circuit World, Vol. 30, No. 1, pp. 25-30, 2003.

Modeling Test, Diagnosis, and Rework Operations and Optimizing Their Location in General Manufacturing Processes, Z. Shi and P. Sandborn, ASME 8th Design for Manufacturing Conference, Chicago, IL, September 2003.

Manufacturing and Reliability of Pb-Free and Mixed System Assemblies (SnPb/Pb-Free) in Avionics Environments, D. Nelson, H. Pallavicini, Q. Zhang, P. Friesen, and A. Dasgupta, The SMTA International Annual Conference, Chicago, IL, September 21-25, 2003.

Environmental Aging and De-Adhesion of Siloxane-Polyimide-Epoxy Adhesive, S. Murray, C. Hillman and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 26, No. 3, pp. 524-531, September 2003.

Lead-Free Soldering in the Japanese Electronics Industry, Y. Fukuda, M. Pecht, K. Fukuda and S. Fukuda, IEEE Transactions on Components and Packaging Technologies, Vol. 26, No. 3, pp. 616-624, September 2003.

A Life Consumption Monitoring Methodology for Electronic Systems, A. Ramakrishnan and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 26, No. 3, pp. 625-634, September 2003.

Creep and High-Temperature Isothermal Fatigue of Pb-Free Solders, Q. Zhang, A. Dasgupta and P. Haswell, Proceedings of IPACK 03: International Electronic Packaging Technical Conference and Exhibition, Maui, Hawaii, July 6-11, 2003.

Auditing the Reliability Capability of Electronics Manufactures, S. Tiku and M. Pecht, Advances in Electronic Packaging, v 1, Advances in Electronic Packaging 2003: Vol. 1, pp. 947-953, 2003 (Proceedings of IPACK 03: International Electronic Packaging Technical Conference and Exhibition, Maui, Hawaii, July 6-11, 2003).

A Review of the Economics of Embedded Passives, P. Sandborn, Proceedings of IPACK 03: International Electronic Packaging Technical Conference and Exhibition, Maui, Hawaii, July 6-11, 2003.

Surface Finish Effects on High-Speed Interconnects, X. Wu, M. Ramahi, G. Brist, and D. Cullen, Proceedings of IPACK 03: International Electronic Packaging Technical Conference and Exhibition, Maui, Hawaii, July 6-11, 2003.

Compact Modeling of Unshrouded Plate Fin Heat Sinks, S. Narasimhan and A. Bar-Cohen, Proceedings of IPACK 03: International Electronic Packaging Technical Conference and Exhibition, Maui, Hawaii, July 6-11, 2003.

Pool Boiling of Water and FC-72 on Copper and Graphite Foams, S. Moghaddam, M. Ohadi and J. Qi, Proceedings of IPACK 03: International Electronic Packaging Technical Conference and Exhibition, Maui, Hawaii, July 6-11, 2003.

Chip Level Refrigeration of Portable Electronic Equipment Using Thermoelectric Devices, G. Solbrekken, K. Yazawaand, and A. Bar-Cohen, Proceedings of IPACK 03: International Electronic Packaging Technical Conference and Exhibition, Maui, Hawaii, July 6-11, 2003.

Measurement of Hygroscopic Swelling in Mold Compounds and Its Effect on PEM Reliability, E. Stellrecht, B. Han, and M. Pecht, Proceedings of IPACK 03: International Electronic Packaging Technical Conference and Exhibition, Maui, Hawaii, July 6-11, 2003.

Advanced Micro Shear Testing for Solder Alloy Using Direct Local Measurement, S. Kwon, Y. Lee, and B. Han, Proceedings of IPACK 03: International Electronic Packaging Technical Conference and Exhibition, Maui, Hawaii, July 6-11, 2003.

Wire Flexure Fatigue Model for Asymmetric Bond Height, K. Meyyappan, P. Hansen and P. McCluskey, Proceedings of IPACK 03: International Electronic Packaging Technical Conference and Exhibition, Maui, Hawaii, July 6-11, 2003.

Reliability Assessment of Delamination in Chip-to-Chip Bonded MEMS Packaging, R. Swaminathan, H. Bhaskaran, P. Sandborn, G. Subramanian, M. Deeds, and K. Cochran, IEEE Transactions on Advanced Packaging, Vol. 26, No. 2, pp. 141-151, May 2003.

Failures in Base Metal Electrode (BME) Capacitors, D. Donahoe and C. Hillman, 2003 Proceedings - 23rd Capacitor and Resistor Technology Symposium, pp. 129-133, Scottsdale, AZ, March 31 - April 3, 2003.

Design Guidelines for Preventing Flex Cracking Failures in Ceramic Capacitors, N. Blattau, D. Barker, and C. Hillman, 2003 Proceedings - 23rd Capacitor and Resistor Technology Symposium, pp. 155-162, Scottsdale, AZ, March 31 - April 3, 2003.

The Economics of Embedded Passives, P. Sandborn, in Integrated Passive Component Technology, Wiley- IEEE Press, 2003.

The NEMI Roadmap: Integrated Passives Technology and Economics, J. Dougherty, J. Galvagni, L. Marcanti, R. Sheffield, P. Sandborn, and R. Ulrich, Proceedings of the Capacitor and Resistor Technology Symposium (CARTS), Scottsdale, AZ, April 2003.

Hygroscopic Swelling and Sorption Characteristics of Epoxy Molding Compounds Used in Electronic Packaging, H. Ardebili, E. Wong, and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 26, No. 1, pp. 206-214, March 2003.

Ion Transport in Encapsulants Used in Microcircuit Packaging, L. Lantz II and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 26, No. 1, pp. 199-205, March 2003.

Failure Analysis of Electrostatic Discharge and Electrical Overstress Failures of GaAs MMIC, Y. Hwang, M. Lee and M. Pecht, IMAPS Advanced Technology Conference on 3-D Packaging, pp. 1-5, Baltimore, MD, March 11-13, 2003.

Fill Pattern of Underfill and Particle Distribution, Y. Huang, D. Bigio and M. Pecht, Society of Plastics Engineers Annual Technical Conference, pp. 1289-1293, Nashville, TN, May 4-8, 2003.

Investigation of Packaging Properties as a Function of Filler Microstructures, Y. Huang, D. Bigio, and M. Pecht, Society of Plastics Engineers Annual Technical Conference, pp. 1320-1324, Nashville, TN, May 4-8, 2003.

Test Tailoring Methodology for Impact Testing of Portable Electronic Products, J. Varghese and A. Dasgupta, IMAC-XXI Conference on Structural Dynamics, Kissimmee, Florida, February 3-6, 2003.

Carbon Nano-tubes and an Optical Method for Life Consumption Monitoring of Electronic Assemblies, P. Casey, D. Anand, and M. Pecht, Proceedings of the 8th Annual Pan Pacific Microelectronics Symposium, Maui, HI, pp. 225-234, February 18-20, 2003.

Field Failure Due to Creep Corrosion on Components with Palladium Pre-plated Lead-frames, P. Zhao and M. Pecht, Microelectronics Reliability, Vol. 43, No. 5, pp. 775-778, 2003.

Isothermal Mechanical Creep and Fatigue of Pb-free Solders, Q. Zhang, P. Haswel,l and A. Dasgupta, International Brazing &Soldering Conference, San Diego, CA, February 16-19, 2003.

Diffusion and Absorption of Corrosive Gases in Electronic Encapsulants, C. Hillman, B. Castillo, and M. Pecht, Microelectronics Reliability, Vol. 43, pp. 635-643, April, 2003.

Optical Measurement of Flip-Chip Package Warpage and Its Effect on Thermal Interfaces, B. Han, Electronics Cooling, Vol. 9, No. 1, pp. 10-14, February 2003.

Remaining Life Assessment of Aging Electronics in Avionic Applications, R. Valentin, M. Osterman, and B. Newman, The Annual Reliability and Maintainability, 2003 Proceedings, pp. 313-318, Tampa Florida, January 27-30, 2003.

A Novel Power Plane with Integrated Simultaneous Switching Noise Mitigation Capability Using High Impedance Surface, T. Kamgaing and O. Ramahi, IEEE Microwave and Wireless Components Letters, Vol. 13, No. 1, pp. 21-23, January 2003.

Characterization of Some Commercial Thermally-Cured Potting Materials, I. Baylakoglu, C. Hillman, and M. Pecht, Proceedings of the International IEEE Conference on the Business of Electronic Product Reliability and Liability, Hong Kong, January 13-14, 2003.

 

Published in 2002

Back to the Top

---

In-situ Sensors for Product Reliability Monitoring, Mishra, S. and Pecht, M., Proceedings of SPIE, Vol. 4755, pp. 10-19, 2002.

Average Elastic Fields and Scale-Dependent Overall Properties of Heterogeneous Micro-polar Materials Containing Spherical and Cylindrical Inhomogeneities, P. Sharma and A. Dasgupta, Physical Review B, Vol. 66, No. 22, 22410, December, 2002.

Recommendations for Future Avionics Hardware Development, C. Wilkinson, M. Pecht, J. Wasson, and L. Condra, Proceedings of the World Aviation Congress, Phoenix, AZ, November 2002.

The Technical, Social and Legal Outlook for Lead-Free Solders, P. Casey and M. Pecht, IEEE International Symposium on Electronic Material and Packaging, pp. 483-492, Kaohsiung, Taiwan, December, 2002.

Challenges for Adopting Pb-Free Interconnects for "Green" Electronics, P. Casey and M. Pecht, IPC/JEDEC International Conference on Lead-Free Electronic Components and Assemblies, pp. 21-32, Taipei, Taiwan, December 10-12, 2002.

Thermal Characteristics of Glass-Metal Composition Plasma Display Panels, M. Lee and M. Pecht, IEEE Transactions on Advanced Packaging, Vol. 25, No. 4, pp. 488-494, 2002.

Remaining Life Assessment of Shuttle Remote Manipulator System End Effector, V. Shetty, D. Das, M. Pecht, D. Hiemstra, and S. Martin, Proceedings of the 22nd Space Simulation Conference, Ellicott City, MD, October 21-23, 2002.

Remaining Life Prediction of Electronic Products Using Life Consumption Monitoring Approach, S. Mishra, M. Pecht, T. Smith, I. McNee, and R. Harris, Proceedings of the European Microelectronics Packaging and Interconnection Symposium, pp. 136-142, Cracow, June 16-18, 2002.

Concurrent Complementary Operators for Mesh Truncation in Frequency-Domain Simulations, O. Ramahi, IEEE Microwave and Wireless Components Letters, Vol. 12, No. 3, pp. 99-101, March 2002.

Observing Real-Time Thermal Deformations in Electronic Packaging, S. Cho, S. Cho and B. Han, Experimental Techniques, Vol. 26, No. 3, pp. 25-29, May/June 2002.

Temperature Dependent Deformation Analysis of Ceramic Ball Grid Array Package Assembly under Accelerated Thermal Cycling Condition, B. Han, S. Cho, and J. Joo, Journal of Electronic Packaging, Transaction of the ASME, August 2002.

Effect of Underfill on Flip-Chip Solder Bumps: An Experimental Study By Microscopic Moire Interferometry, S. Cho and B. Han, The International Journal of Microcircuits and Electronic Packaging, Vol. 24, No. 3, pp. 217-239, 2002.

Virtual Life Assessment of Electronic Hardware Used in the Advanced Amphibious Assault Vehicle (AAAV), R. Valentin, J. Cunningham, M. Osterman, A. Dasgupta, M. Pecht, and D. Tsagos, Proceedings of the 2002 Winter Simulation Conference, Vol. 1, pp. 948-953, San Diego, California, December 8-11, 2002.

Stress Relaxation in Plastic Molding Compounds, M. Lee, M. Pecht, X. Huang, and R. Lee, IEEE International Symposium on Electronic Material and Packaging, pp. 1-6, Kaohsiung, Taiwan, December, 2002.

Design Guidelines for Avoiding Flex Cracking in Ceramic Capacitors, C. Hillman, N. Blattau, and D. Barker, Proceedings of the National Electronic Packaging and Production Conference (NEPCON -West), CA version pp. 318-326, San Jose, CA, December 2002.

Isothermal Mechanical Fatigue of Pb-free Solders: Damage Propagation Rate & Time to Failure, Q. Zhang, P. Haswell, A. Dasgupta, and M. Osterman, 34th International SAMPE Technical Conference, Baltimore, MD, November 4-7, 2002.

Cyclic Mechanical Durability of Sn-3.9Ag-0.6Cu and Sn-3.5Ag Lead-Free Solder Alloys, Q. Zhang, P. Haswell, and A. Dasgupta, Proceedings ASME IMECE 2002, New Orleans, LA, November 17-22, 2002.

Fretting Corrosion Studies For Lead-Free Alloy Plated Contacts, J. Wu and M. Pecht, Proceedings of the 4th Electronics Packaging Technology Conference, Singapore, pp. 20-24, December 10-12, 2002.

Plastic Ball-Grid-Arrays (PBGA): Are They Ready for Environmentally Harsh Aerospace Applications? R. Guha, D. Humphrey, K. Prodromides, T. Burnette, T. Koschmieder, M. Osterman, H. Qi, J. Kennedy, and J. Veum, 02WAC-149, World Aviation Congress & Display (WAC), Phoenix, AZ, November 5-7, 2002.

Underfilled PBGA Packages and Their Board Level Cycling and Vibration Performance, T. Baumann, D. Humphrey, K. Prodromides, T. Burnette, T. Koschmieder, J. Kennedy, J. Veum, H. Qi, and M. Osterman, SMTA International 2002, Donald Stephens Convention Center, Rosemont, IL, September 24-26, 2002.

Using Electronic Parts Outside the Manufacturer's Specified Temperature Range, M. Pecht, D. Das, and R. Biagini, Proceedings of The 3rd International Conference on Quality and Reliability, pp. 182-192, Australia, August 28-30, 2002.

Airborne Operation of Portable Electronic Devices, L. Lin, J. Xie, O. Ramahi M. Pecht, and B. Donham, IEEE Antenna's and Propagation Magazine, Vol. 44, No. 4, pp. 30-39, August 2002.

The IEEE Standards on Reliability Program and Reliability Prediction Methods for Electronic Equipment, M. Pecht, D. Das, and A. Ramakrishnan, Microelectronics Reliability, Vol. 42, pp. 1259-1266, 2002.

Determining Optimum Redesign Plans for Avionics Considering Electronic Part Obsolescence Forecasts, P. Singh, P. Sandborn, D. Lorenson, and T. Geiser, Proceedings World Aviation Congress (SAE Technical Paper: 2002-1-3012), Phoenix, AZ, November 2002.

Aging Aircraft Usable Life and Wear-out Issues, D. Humphrey, W. Shawlee, P. Sandborn, and D. Lorenson, Proceedings World Aviation Congress (SAE Technical Paper: 2002-1-3013), Phoenix, AZ, November 2002.

Electronic Part Obsolescence Driven Design Refresh Optimization, P. Sandborn and P. Singh, Proceedings FAA/DoD/NASA Aging Aircraft Conference, San Francisco, CA, September 2002.

Hygro-Mechanical Durability of Underfilled Flip-Chip-on-Board (FCOB) Interconnects, J. Okura, A. Dasgupta, and J. Caers, Transactions of the ASME, Vol. 124, pp. 184-187, September 2002.

Thermomechanical Durability of High I/O BGA Packages, P. Davuluri, S. Shetty, A. Dasgupta, and S. Young, Transactions of the ASME, Vol. 124, pp. 226-270, September 2002.

Micro-Mechanics of Creep-Fatigue Damage in PB-SN Solder Due to Thermal Cycling-Part I: Formulation, P. Sharmal and A. Dasgupta, Transactions of the ASME, Vol. 124, pp. 292-297, September 2002.

Micro-Mechanics of Creep-Fatigue Damage in PB-SN Solder Due to Thermal Cycling-Part II: Mechanistic Insights and Cyclic Durability Predictions From Monotonic Data, P. Sharmal and A. Dasgupta, Transactions of the ASME, Vol. 124, pp. 298-304, September 2002.

Application of the Concurrent Complementary Operators Method to Numerically-Derived Absorbing Boundary Conditions, X. Wu and O. Ramahi, Microwave and Optical Technology Letters, Vol. 32, No. 4, pp. 272-275, February, 2002.

Analysis and Reduction of Electromagnetic Field Leakage through Loaded Apertures, L. Li and O. Ramahi, IEEE Antennas and Propagation Society/URSI International Symposium. San Antonin, TX, June 16-21, 2002.

Calculation and Mitigation of Power Plane Resonance in Printed Circuit Boards (PCB), V. Subramanian and O. Ramahi, In Proceedings IEEE Antennas and Propagation Society/URSI International Symposium, San Antonio, TX, June 16-21, 2002.

Electronic Part Obsolescence Driven Design Refresh Optimization, P. Singh, P. Sandborn, T. Geiser, and D. Lorenson, Proceedings International Conference on Concurrent Engineering, pp. 961-970, Cranfield University, UK, July 2002.

A Detailed Cost Model for Concurrent Use With Hardware/Software Co-Design, D. Ragan, P. Sandborn, and P. Stoaks, Proceedings IEEE Design Automation Conference, pp. 269-274, New Orleans, LA, June 2002.

Intermetallic Growth on PWBs Soldered with Sn3.8Ag0.7Cu, Y. Zheng, C. Hillman, and P. McCluskey, presented on Proceedings of the 52nd Electronic Components & Technology Conference, pp. 1226-1231, San Diego CA, 2002.

Effect of PWB Plating on the Microstructure and Reliability of SnAgCu Solder Joints, Y. Zheng, C. Hillman, and P. McCluskey, presented on AESF SUR/FIN 2002 Chicago IL, June 24-27, 2002.

A Review of Reliability Prediction Methods for Electronic Devices, B. Foucher, J. Boullie, B. Meslet, and D. Das, Microelectronics Reliability, Vol. 42, No. 8, pp. 1155-1162, August, 2002.

Characterization of Plastic Encapsulant Materials as a Baseline for Quality Assessment and Reliability Testing, L. Lantz, S. Hwang, and M. Pecht, Microelectronics Reliability, Vol. 42, No. 8, pp. 1163-1170, August, 2002.

Impact of Environmental Regulations on Electronics Manufacture, Use and Disposal, R. Ciocci, J. Wu, and M. Pecht, European Microelectronics Packaging and Interconnection Symposium, Cracow, Poland, pp. 73-80, June 16-18, 2002.

The "Trouble Not Identified" Phenomenon in Automotive Electronics, D. Thomas, K. Ayers, and M. Pecht, Microelectronics Reliability, Vol. 42, pp. 641-651, 2002.

Tracking Semiconductor Part Changes Through the Part Supply Chain, S. Murray, M. Boru, M. Pecht, and D. Erhart, IEEE Transactions on Components and Packaging Technologies, Vol. 25, No. 2, pp. 230-238, June 2002.

Uprating of a Single Inline Memory Module, N. Pendse, D. Thomas, D. Das, and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 25, No. 2, pp. 266-269, June 2002.

Defining Accelerated Test Requirements for PWBs: A Physics-Based Approach, K. Cluff and M. Osterman, presented at IPC Printed Circuits Expo 2002, Long Beach Convention Center, Long Beach, CA, March 24-28, 2002.

Simulation Improved Testing of Electronic Hardware, M. Osterman, A. Dasgupta, and L. Tonnelier, 2002 Proceedings of the 48th ATM, ISBN: 1-877862-81-9, Document No. 2011, Published on April 1, 2002.

Lifetime RC Time Delay of On-Chip Copper Interconnect, M. Sun, M. Pecht, and D. Barbe, IEEE Transactions on Semiconductor Manufacturing, Vol. 15, No. 1, pp. 253-259, May 2002.

A Comparison of the Theory of Moisture Diffusion in Plastic Encapsulated Microelectronics with Moisture Sensor Chip and Weight-Gain Measurements, H. Ardebili, C. Hillman, M. Natishan, P. McCluskey, M. Pecht, and D. Peterson, IEEE Transactions on Components and Packaging Technologies, Vol. 25, No. 1, pp. 132-139, March 2002.

Electrical Characterization of Lead-Free Solder Separable Contact Interfaces, J. Wu, M. Pecht, and R. Mroczkowski, Journal of Surface Mount Technology, Vol. 14, Issue. 2, pp. 25-29, June 2002. Also presented at Pan Pacific Microelectronics Symposium, pp. 125-130, Maui, Hawaii, February 5-7, 2002.

The Business, Product Liability and Technical Issues Associated with Using Electronic Parts Outside the Manufacturer's Specified Temperature Range, M. Pecht and R. Biagini, Pan Pacific Microelectronics Symposium, pp. 391-398, Maui, Hawaii, February 5-7, 2002.

 

Published in 2001

Back to the Top

---

Accelerated Qualification of Electronic Assemblies Under Combined Temperature and Vibration Environments: Is Miner's Hypothesis Valid?, Kumar Upadhyayula and Abhijit Dasgupta, Accelerated Stress Testing Handbook: Guide for Achieving Quality Products, Ed. Chan and Englert, IEEE Press, 2001, Chapter 12, pp 189-202.

Capturing the Benefits of Disruptive Innovation in E-Business Supply Chain Management, Chung-Shing Lee and Michael Pecht, International Conference on Supply Chain Management and Information Systems in the Internet Age (SCMIS 2001).Hong Kong, pp.47–55, December 2001

Analysis of the Cost of Embedded Passives in Printed Circuit Boards, Peter Sandborn, Bevin Etienne and Daniel Becker, Proceedings of the IPC Annual Meeting, Orlando, FL, October 2001.

Solder Joint Crack Propagation in Plastic and Ceramic Packaged Diodes mounted on Insulated Metal Substrate, N. Sangalli and D. Barker, 2001 Electronic Components and Technology Conference, 2001.

On the Design Parameters of Flip-Chip PBGA Package Assembly for Optimum Solder Ball Reliability, K. Verma, S. Park, and B. Han, IEEE Transactions on Components and Packaging Technologies, Vol. 24, No. 2, pp. 300-307, 2001.

Measurement of Thermal Expansion Coefficient of Flexible Substrate by Moire Interferometry, Z. Wu, S. Cho, and B. Han, Experimental Techniques, Vol. 25, No. 3, pp. 22-25, 2001.

Far-infrared Fizeau Interferometry, Kaushal Verna and Bongtae Han, Optical Society of America, Vol 40, No 28, 4981-4987, 1 October, 2001.

Sensitivity enhancement of far-infrared Fizeau interferometry by digital image processing, Kaushal Verna and Bongtae Han, Society of Photo-Optical Instrumentation Engineers, Vol 40, No 9, 1970-1977, September, 2001.

DMDTM Package Model Calibration Using Interferometry, M. Variyam and B. Han, TI Technical Journal, pp. 1-9, 2001.

Modeling of Effects of Geometry and Temperature Cycle on Viscoplastic Deformation and Durability of FCOC Solder Joints, Q. Zhang, Y. Joshi, A. Dasgupta, and R.Pal, Proceedings of IPACK'01, The Pacific Rim/ASME International Electronic Packaging Technical Conference and Exhibition, Kauai, HI, July 9-13, 2001.

Failures in Electronic Assemblies and Devices, M. Pecht, P. McCluskey, and J. Evans, In Product Integrity and Reliability in Design, Chapter 8, Springer Verlag, London, UK, 2001.

Failure Analysis of Electronic Assemblies and Devices, M. Pecht and P. McCluskey, In Product Integrity and Reliability in Design, Chapter 13, Springer Verlag, London, UK, 2001.

Microthermomechanical Analysis of Lead-Free Sn3.9Ag0.6Cu Alloys; Part I: Viscoplastic Constitutive Properties; and Part II: Cyclic Durability Properties, P. Haswell, A. Dasgupta, and A. Paper, MRS Proceedings, N2.1, Vol. 682E, MRS Spring Symposium on Microelectronics and Microsystems Packaging; Editors: Boudreaux, Dauskardt, Last, and McCluskey, Chicago IL, 2001.

The NEMI Roadmap Perspective on Integrated Passives, J. Dougherty, J. Galvagni, L. Marcanti, P. Sandborn, R. Charbonneau, and R. Sheffield, Proceedings of the European Microelectronics and Packaging Conference & Exhibition, May 2001.

Engineered Reliability for Intelligent Well Systems, A. Veneruso, A. Kosmala, R. Bhavsar, J. Bernard, and M. Pecht, OTC 1301, Offshore Technology Conference, Houston, TX, April 30 - May 3, 2001.

A New Test/Diagnosis/Rework Model for Use in Technical Cost Modeling of Electronic Systems Assembly, T. Trichy, P. Sandborn, and S. Sahasrabudhe, Proceedings of the International Test Conference, pp. 1108-1117, Baltimore MD, November 2001.

Lead-free Solder Replacement: Beyond the Material Substitution, R. Ciocci, Environmentally Conscious Manufacturing II, Vol. 4569, pp. 100-108, Newton, USA, 28-29, October 2001.

IC Component Sockets: Applications and Challenges, W. Liu, M. Pecht, and R. Martens, International Microelectronics And Packaging Society, First Issue, pp. 61-67, 2001.

Using PEEC and FDTD to Solve the Challenge Delay Line Problem, B. Archambeault, A. Roden, and O. Ramahi, IEEE International Symposium on Electromagnetic Compatibility, Montreal, Canada, August 13-17, 2001.

Full-Wave Analysis of Delay Lines, O. Ramahi and B. Archambeault, 14th International Zurich Symposium and Technical Exhibition on Electromagnetic Compatibility, Zurich, Switzerland, February 20-22, 2001.

Phased-Array Radar for Breast Cancer Detection, O. Ramahi, T. Thakker, S. Trabelsi, and R. Russell, IEEE Antennas and Propagation Society International Symposium, Boston, MA, July 8-13, 2001.

Prediction of Shielding Degradation Arising from Variation in Contact Impedance of Intermetallic Junctions, L. Li and O. Ramahi, IEEE Antennas and Propagation Society International Symposium, Boston MA, July 8-13, 2001.

Complementary Operators and Associated Issues of Instability, O. Ramahi, In Proceedings International Conference on Electromagnetics in Advanced Applications (ICEAA01), Torino, Italy, September 10-14, 2001.

Towards a Numerically-Comprehensive Theory for the Complementary Operators Method, O. Ramahi, URSI International Symposium on Electromagnetic Theory, Victoria, Canada, May 13-17, 2001.

Manufacturer Assessment Procedure and Criteria for Parts Selection and Management, T. Syrus, M. Pecht, and R. Uppalapati, IEEE Transactions on Electronics Packaging Manufacturing, Vol. 24, No. 4, pp. 351-358, October 2001.

Part Assessment Guidelines and Criteria for Parts Selection and Management, T. Syrus, M. Pecht, and D. Humphrey, IEEE Transactions on Electronics Packaging Manufacturing, Vol. 24, No. 4, pp. 339-350, October 2001.

Rapid Reliability Assessment of ULSI Electronics, P. McCluskey, Proceedings of the 18th International VLSI Multilevel Interconnection, Santa Clara CA, November 28-29, 2001.

Evaluating the Performance and Reliability of Embedded Computer Systems for Use in Industrial and Automotive Temperature Ranges, C. O'Connor, K. Nathan, and P. McCluskey, Intel Developer Network News, Vol. 1, pp. 62-65, 2001.

Microsystem Packaging for High Temperature and Harsh Environments, L. Chen and P. McCluskey, MST (Microsystems) News, pp. 41-42, September 2001.

Junction Temperature Considerations in Evaluating Electronic Parts for Use Outside Manufacturers-Specified Temperature Ranges, L. Condra, D. Das, N. Pendse, and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 24, No. 4, pp. 721-728, December 2001.

Parameter Recharacterization: A Method of Thermal Uprating, D. Das, N. Pendse, C. Wilkinson, and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 24, No. 4, pp. 729-737, December 2001.

Process Capability and Product Reliability, B. Ramakrishnan, P. Sandborn, and M. Pecht, Microelectronics Reliability, Vol. 41, No. 12, pp. 2067-2070, December 2001.

Using Yielded Cost as a Metric for Modeling Manufacturing Processes, D. Becker and P. Sandborn, Proceedings ASME 6th Design for Manufacturing Conference, Pittsburgh PA, September 2001.

Fundamental Reliability Issues Associated with A Commercial Particle-in-Elastomer Interconnection System, W. Liu, M. Pecht and J. Xie, IEEE Transactions on Components and Packaging Technologies, Vol. 24, No. 3, pp. 520-525, September, 2001.

Reliability Engineering in the 21st Century - A Focus on Predicting the Reliability of Electronic Products and Systems, M. Pecht, Proceedings of The 5th ICRMS 2001, Vol. 1, pp. 1-19, Dalian, China, August 28-31, 2001.

Fatigue of Chip Scale Package Interconnects Due to Cyclic Bending, S. Shetty, V. Lehtinen, A. Dasgupta, and V. Halkola and T. Reinikainen, Journal of Electronic Packaging, Vol. 123, Issue 3, pp. 302-308, September 2001.

Hollow Fibers can Accelerate Conductive Filament Formation, M. Pecht, K. Rogers, and C. Hillman, ASM International Practical Failure Analysis, pp. 57-60, Vol. 1, Issue 4, August 2001.

Application-Specific Economic Analysis of Integral Passives, P. A. Sandborn, B. Etienne, and G. Subramanian, IEEE Transactions on Electronics Packaging Manufacturing, Vol. 24, No. 3, pp. 203-213, July 2001.

On the Use of Yielded Cost in Modeling Electronic Assembly Processes, D. Becker and P. Sandborn, IEEE Transactions on Electronics Packaging Manufacturing, Vol. 24, No. 3, pp. 195-202, July 2001.

Lead-free Solder and the Consumer Electronics Market, R. Ciocci, Proceedings of 2001 Green Engineering Conference, Roanoke, VA, July 29-31, 2001.

Mechanical Design Parameters for Enhanced Solder Ball Reliability of Flip-Chip PBGA Package Assembly, K. Verma, S. Park, and B. Han, Proceedings of IPACK'01, Kauai, Hawaii, USA,July 8-13, 200,.

Real-Time Moire Interferometry for Deformation Analysis under Accelerated Thermal Cycling Condition, S. Cho, J. Joo, and B. Han, Proceedings of IPACK'01, Kauai, Hawaii, July 8-13, 2001.

Measurement of Thermal Expansion Coefficient of Flexible Substrate by Moire Interferometry, B. Han, Z. Wu, and S. Cho, Experimental Techniques, Vol. 25, No. 3, pp. 22-25, 2001.

High Performance Packaging Materials for Improved Thermal Management of Power Electronics, K. Moores and Y. Joshi, Future Circuits International, Issue No. 7, pp. 45-49, 2001.

Thermal Characterization of a Liquid Cooled AlSiC Base Plate with Integral Pin Fins K. Moores, Y. Joshi, and G. Schiroky, IEEE Transactions on Components and Packaging Technologies, Vol. 24, No. 2, pp. 213-219, 2001.

A Demonstration of Virtual Qualification for the Design of Electronic Hardware, J. Cunningham, R. Valentin, C. Hillman, A. Dasgupta, and M. Osterman, ESTECH 2001, IEST, Phoenix, AZ, April 2001.

Carrier-Level Packaging and Reliability of a MEMS-Based Safety and Arming Device, M. Deeds, K. Cochran, R. Swaminathan, and P. Sandborn, Proceedings MRS Spring Meeting, April 2001.

Lifecycle Forecasting of ASICs, Z. Huang, P. Sandborn, M. Pecht, and R. Solomon, Future Circuits International, Issue 7, pp. 101-107, Technology Publishing Ltd, London, UK, 2001.

Progress on Internet-Based Educational Material Development for Electronic Products and Systems Cost Analysis, P. Sandborn and C. Murphy, Proceedings of the Electronic Components and Technology Conference (ECTC), pp. 1261-1266, Lake Buena Vista, FL, June 1, 2001.

A Web-Based Graduate Course on the Mechanical Design of High Temperature and High Power Electronics, P. McCluskey, Proceedings of the Electronic Component and Technology Conference (ECTC), pp. 397-400, Lake Buena Vista, FL, May 30, 2001.

Application-Specific Economic Analysis of Integral Passives in Printed Circuit Boards, B. Etienne and P. A. Sandborn, Proceedings of the IMAPS Advanced Packaging Materials Processes, Properties and Interfaces Symposium, Braselton GA, pp. 399-404, March 2001.

An Investigation of the Mechanical Behaviour of Conductive Elastomer Interconnects, J. Xie, M. Pecht, D. DeDonato, and A. Hassanzadeh, Microelectronics Reliability, Vol. 41, No. 1, pp. 281-286, 2001.

Fatigue and Intermetallic Formation in Lead Free Solder Die Attach, P. McCluskey, Proceedings of IPACK'01, The Pacific Rim/ASME International Electronic Packaging Technical Conference and Exhibition, Kauai HI, July 9-13, 2001.

Micro-Mechanics of Fatigue Damage in Pb-Sn Solder Due to Vibration and Thermal Cycling, A. Dasgupta, P. Sharma, and K. Upadhyayula, International Journal of Damage Mechanics, Vol. 10, pp. 101-132, April 2001.

We STILL have a headache with Arrhenius, M. Osterman, Electronics Cooling, Vol. 7, No. 1, pp 53-54, February 2001.

Evaluation of Built-In Test, M. Pecht, M. Dube, M. Natishan, R. Williams, J. Banner, and I. Knowles, IEEE Transactions on Aerospace and Electronic Systems, Vol. 37, No. 1, pp. 266-272, January 2001.

Palladium-plated Packages: Creep Corrosion and Its Impact on Reliability, J. Xie and M. Pecht, Advanced Packaging, pp. 39-42, February 2001.

Published in 2000

Back to the Top

---

Micro-mechanical deformation analysis of surface laminar circuit in organic flip-chip package: an experimental study, B. Han and P. Kunthong, Journal of Electronic Packaging, Vol 122, 294-300, December 2000.

Deciphering the DELUGE of DATA - Understanding Electronic Part Data Sheets for Parts Selection and Management, D. Das, N. Pendse, M., L. Condra and C. Wilkinson, Circuit & Devices, pp. 26-34, September 2000.

Warpage measurement on dielectric rough surfaces of microelectronics devices by far infrared Fizeau interferometry, K. Verma and B. Han, Journal of Electronic Packaging, Vol 122, 227-232, September 2000.

Natural Convection Air Cooling of Electronic Components in Partially Open Compact Horizontal Enclosures, E. Yu and Y.. Joshi, IEEE Transactions on components and Packaging Technologies, Vol. 23, No. 1, March 2000.

Assessing the Operating Reliability of Land Grid Array Elastomer Sockets, J. Xie, C. Hillman, P. Sandborn, M. Pecht, A. Hassenzadeh, and D. Dedonato, IEEE Transactions on Components and Packaging Technologies, Vol. 23, No. 1, pp. 171-176, March 2000.

Moire Interferometry for Engineering Mechanics: Current Practices and Future Developments, B. Han, D. post, and P. Ifju, Journal of Electronic Packaging, Transaction of the ASME, Vol. 122, No. 3, pp. 294-300, 2000.

Parameter Re-characterization Case Study: Electrical Performance Comparison of the Military and Commercial Versions of a TI Octal Buffer, N. Pendse and M. Pecht, Future Circuits International, Vol. 6, pp. 63-67, Technology Publishing Ltd, London, UK, 2000.

Moire methods for engineering and science - moire interferometry and shadow moire, Daniel Post, Bongtae Han and Peter G. Ifju, Photomechanics Topics in Applied Physics, Vol 77, 151-196, 2000.

Risk Assessment, Mitigation and Management - The Key Focus of Competitive Electronic Products Development in the 21st Century, M. Pecht, D. Das, and L. Yang, Proceedings of the SEMICON Korea Technical Symposium 2000, Seoul, Korea, pp. 217-224, February 16, 2000.

Effect of Condenser Location and Imposed Circulation on the Performance of a Compact Two-Phase Thermosyphon, Y. Lang, Y. Joshi, and W. Nakayama, Engineering Foundation Conference on Heat Transfer and Transport Phenomena for Microsystems, pp. 304-311, Banff, Alberta, Canada, October 15-20, 2000.

Guidelines to Select Underfills for Flip Chip on Board Assemblies and Compliant Interposers for Chip Scale Package Assemblies, J. Okura, S. Shetty, B. Ramakrishnan, A. Dasgupta, J. Caers and T. Reinikainen, Microelectronics Reliability, Vol. 40, No. 7, pp. 1173-1180, July 2000.

Combined Effects of Sub-Cooling and Operating Pressure on the Performance of a Two-Chamber Thermosyphon, C. Ramaswamy, Y. Joshi and W. Nakayama, IEEE transactions on Components and Packaging Technologies, Vol. 23, No.1,pp. 61-69, March 2000.

Electronic Hardware Reliability, A. Ramakrishnan, T. Syrus and M. Pecht, Avionics Handbook, pp. 22-1 to 22-21, CRC Press, Boca Raton, Florida, December 2000.

Thermal Management of High Temperature Pulsed Electronics Using Phase Change Materials, S. Gurrum, Y. Joshi and J. Kim, 34th National Heat Transfer Conference Pittsburgh, NHTC 2000-12197, Pennsylvania, August 20-22, 2000.

Method for Assessing Remaining Life in Electronic Assemblies, P. McCluskey, J. Kweon, J. Kim and H. Jeon, Microelectronics Reliability, Vol. 40, No. 2, pp. 293-306, 2000.

Reliable Use of Commercial Technology in High Temperature Environments, P. McCluskey, K. Mensah, C. O'Connor and A. Gallo, Microelectronics Reliability, Vol. 40, No. 8-10, pp. 1671-1678, August - October 2000.

Single Chamber Compact Thermosyphons with Micro-Fabricated Components, S. Murthy, Y. Joshi and W. Nakayama, Proceedings of the 7th Intersociety Conference on Thermal and Thermomechanical Phenomenon in Electronic Systems (I-Therm), Las Vegas NV, May 2000.

Electronic Part Life Cycle Concepts and Obsolescence Forecasting, R. Solomon, P. Sandborn and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 23, No. 3, pp. 707-717, December 2000.

Development and Activities of the IEEE Reliability Standards Group, M. Pecht and A. Ramakrishnan, Journal of the Reliability Engineering Association of Japan, Vol. 22, No. 8, pp. 699-706, November 2000.

Electronic Hardware Reliability, A. Ramakrishnan, T. Syrus and M. Pecht, The Modern Microwave and RF Handbook, pp. 3-102 to 3-121, CRC Press, Boca Raton, Florida, 2000.

Kinetic Model for Noble Plated Electrical Contact Behaviour, M. Sun, M. Pecht and R. Martens, Scripta Materialia, Vol. 42, pp. 1-8, January 2000.

Effectiveness of Conformal Coatings on a PBGA Subjected to Unbiased High Humidity, High Temperature Tests, K. Zhang and M. Pecht, Microelectronics International, Vol. 17, No. 3, pp. 16-20, 2000.

Accelerated Testing of Microelectronics: Review, Pitfalls and New Developments, A. Katz, M. Pecht and E. Suhir, Proceeding of the IMAPS International Symposium on Microelectronics and Packaging, Tel Aviv, Israel, pp. 31-42, June 15, 2000.

Semiconductor Companies in China, W. Liu, M. Pecht and D. Hodges, Semiconductor International, Vol. 23, N0. 10, pp. 148-154, September 2000.

A Comparison with Taiwan, M. Pecht, W. Liu and D. Hodges, Semiconductor International, Vol. 23, N0. 10, pp. 135-136, September 2000.

Newer Fabs in China, M. Pecht, W. Liu and D. Hodges, Semiconductor International, Vol. 23, N0. 10, pp. 156-162, September 2000.

Trends in China's Semiconductor Industry, M. Pecht, W. Liu and D. Hodges, Semiconductor International, Vol. 23, N0. 10, pp. 134-144, September 2000.

Virtual Prototyping Printed Circuit Boards, P. Sandborn, The Board Authority, Vol. 2, No. 4, pp. 6-10, December 2000.

An Investigation of the Electrical Contact Resistance of Corroded Pore Sites on Gold Plated Surfaces, R. Martens and M. Pecht, IEEE Transactions on Advanced Packaging, Vol. 23, Issue 3, pp. 561-567, August 2000.

New Course Development in Products and Systems Cost Analysis, P. Sandborn, D. T. Allen, and C. F. Murphy, Proceedings Electronic Components and Technology Conference, pp. 1021-1026, May 2000.

Packaging of a MEMS Based Safety and Arming Device, M. Deeds, K. Cochran, P. Sandborn and R. Swaminathan, ITHERM 2000 Proceedings, Vol. 1, pp. 107-112, May 2000.

Test and Evaluation of Chip-to-Chip Attachment of MEMS Devices, P. Sandborn, R. Swaminathan, G. Subramanian, M. Deeds, and K. Cochran, ITHERM 2000 Proceedings, Vol. 1, pp. 133-140, May 2000.

Contact Variation and Shielding Performance of Electromagnetic Shielding Gaskets, J. Xie, M. Pecht, and D. Barbe, Proceedings of the 33rd Annual Connector and Interconnection Technology Symposium and Trade Show, Orlando FL, pp. 61-70, October 23-25, 2000.

An Avionics Guide to Uprating of Electronic Parts, D. Humphrey, L. Condra, N. Pends, D. Das, C. Wilkinson and M. Pecht, IEEE Transactions on Components and Packaging Technologies, Vol. 23, No. 3, pp. 595-599, September, 2000.

Chinese Electronics Industry in the Year 2000, C. Lee, M. Pecht, and Y. Chen, IMAPS Taiwan Technical Symposium 2000, Session 4, pp. 289-302, 2000.

Understanding Electronic Part Data Sheets for Parts Selection and Management, D. Das, N. Pends, M. Pecht, L. Condra, and C. Wilkinson, IEEE Circuits and Devices, Vol. 16, No. 5, pp. 26-34, September 2000.

Effects and Interactions of Design Parameters for Gold-Plated Electric Contacts, R. Martens and M. Pecht, Journal of Materials Science: Materials in Electronics , Vol. 11, pp. 209-218, May 2000.

Equipment Supplier Intervention Techniques, C. A. Schwach, A. Mathur, R. Solomon, P. Sandborn, and M. Pecht, Future EMS International, No. 3, pp. 97-100, 2000.

Numerical and Experimental Thermal Characterization of a Liquid Cooled AlSiC Power Electronics Base Plate with Integral Pin Fins, K. Moores, Y. Joshi, and G. Schiroky, ITHERM 2000 Proceedings, Vol. 2. pp. 385-390, May 2000.

Effect of Corrosion on the Transfer Impedance of Zinc-Coated Steel Enclosures, J. Xie, M. Pecht, D. Barbe, S. Das, J. Nuebel, and B. Zand, IEEE Transactions on Electromagnetic Compatibility, Vol. 42, No. 1, pp. 71-76, February 2000.

Electronic Products and Systems Research and Education for the 21st Century, Y. Joshi and P. Sandborn, Future Circuits International, Vol. 6, pp. 88-91, 2000.

Corrosion of a Zinc-coated Steel Enclosure at the Contact Interfaces of Gasket Joints, J. Xie, M. Pecht, S. Das, J. Nuebel, and B. Zand, IEEE Transactions on Components and Packaging Technologies, Vol. 23, No. 1, pp. 136-142, March 2000.

Assessing the Operating Reliability of LGA Elastomer Sockets, J. Xie, C. Hillman, P. Sandborn, M. Pecht, A. Hassanzadeh, and D. DeDonato, IEEE Transactions on Components and Packaging Technologies, Vol. 23, No. 1, pp. 171-176, March 2000.

The Electronic Part Life Cycle, M. Pecht and D. Das, IEEE Transactions on Components and Packaging Technologies, Vol. 23, No. 1, pp. 190-193, March 2000.

Published in 1999

Back to the Top

---

Failure Assessment Software for Circuit Card Assemblies, M. Osterman and T. Stadterman, Annual Proceedings of Reliability and Maintainability Symposium, pp. 269-276, January 18-21, 1999.

Performance Assessment of Thermoelectric Coolers for Use in High Temperature Electronics Applications, K. Moores, Y. Joshi, and G. Miller, Proceeding of the 18th International Conference on Thermoelectrics, Baltimore, MD, August 1999.

Moisture Ingress into Organic Laminates, M. Pecht, H. Ardebilib, A. Shukla, J. Hagge, and D. Jennings, IEEE Transactions on Components and Packaging Technology, Vol. 22, No. 1, pp. 104-110, March 1999.

An Interactive Multistage e-inequality Constraint Method for Multiple Objectives Decision Making, N. Palli, S. Azarm, P. McCluskey, and R. Sundararajan, Microelectronics International, 16/1, 6-7, 1999. Journal of Mechanical Design, Vol. 120, pp. 678-686, December 1999.

Integrated Thermal Analysis of an Automotive Electronic System, S. Murthy, Y. Joshi, V. Adams, and K. Ramakrishna, Proceedings of InterPACk'99, Vol. 1, pp. 979-986, June 1999.

Editorial: Life Cycle and Environmental Mismatches in Electronics for Critical Applications, P. McCluskey, Microelectronics International, Vol. 16, No. 1, pp. 6-7 1999.

New Findings in the Occurrence of False-Healing in Plastic Encapsulated Microcircuits using Scanning Acoustic Microscopy, T. Moore, Y, Ranade, and M. Pecht, IEEE Transactions on Components and Packaging Technology, Vol. 22, No. 2, pp. 266-269, June 1999.

An Investigation on the Mechanical Behaviour of Elastomer Interconnects, J. Xie, M. Pecht, D. DeDonato, and A. Hassanzadeh, the 32nd International Symposium on Microelectronics, Chicago, IL, pp. 58-63, October 1999.

A Quantitative Assessment of Thermal Interface Materials, I. Bordelon, J. Xie, Y. Joshi, and C. Latham, Future Circuits International, Issue 5, pp. 75-78, 1999.

A Comparative Assessment of Gold Plating Thickness Required for Stationary Electrical Contacts, M. Sun, M. Pecht, and M. Natishan, Microelectronics Journal, Vol. 30, pp. 217-222, 1999.

A Statistical Mechanical Model of Electrical Carbon Fiber Contacts, J. Xie, M. Pecht, A. Dasgupta, J. Swift, and S. Wallace, Transactions of the ASME the Journal of Electronic Packaging, Vol. 121, pp. 286-290, December 1999.

A Comparison of Routing Estimation Methods for Microelectronic Modules, P. Sandborn and P. Spletter, Microelectronics International, pp. 36-41, December 1999.

Delamination Study of Chip-to-Chip Bonding for a LIGA Based Safety and Arming System, G. Subramanian, M. Deeds, K. Cochran, R. Raghavan, and P. Sandborn, Proceedings SPIE Symposium on Micromachining and Microfabrication, pp. 112-119, Sept. 1999.

A Multi-scale Conjugate Thermal Modeling Approach for Air Cooled Electronic Enclosures, L. Tang and Y. Joshi, Proceedings of InterPACk'99, Vol. 1, pp. 295-304, June 1999.

A Model for Optimizing the Assembly and Disassembly of Electronic Systems, P. A. Sandborn and C. F. Murphy, IEEE Transactions on Electronics Packaging Manufacturing, Vol. 22. No. 2, pp. 105-108, April 1999.

Reliability and Performance of Advanced PWB Assemblies, M. Osterman, High Performance Printed Circuit Boards, Chapter 9, ISBN: 0-07-026713-8, 1999.

Physics-of-Failure Assessment of a Cruise Control Module, K. Kimseng, M. Hoit, N. Tiwari, and M. Pecht, Microelectronics Reliability, Vol. 39, pp. 1423-1444, February 1999.

A Prescriptive Production-Distribution Approach for Decision Making in New Product Design C. Whicomb, N. Palli, and S. Azarm, IEEE Transactions on Systems, Man, and Cybernetics, Part C, Vol. 29, No. 3, pp. 336-348, 1999.

A Risk-Informed Methodology for Parts Selection and Management, M. Jackson, P. Sandborn, M. Pecht, C. Hemens-Davis, and P. Audette, Quality and Reliability Engineering International, Vol. 15, pp. 261-271, September 1999.

Conductive Filament Formation: A Potential Reliability Issue in Laminated Printed Circuit Cards with Hollow Fibers, M. Pecht, C. Hillman, K. Rogers, and D. Jennings, IEEE/CPMT, Vol. 22. No. 1, pp. 60-67, January 1999.

Conductive Filament Formation Failure in a Printed Circuit Board, K. Rogers, C. Hillman, M. Pecht, and S. Nachbor, Circuit World, Vol. 25 (3), pp. 6-8, 1999.

Thermal Control of Horizontally Mounted Heat Sources using Phase Change Materials, D. Pal and Y. Joshi, Proceedings of InterPACk'99, Vol. 2, pp. 1625-1630, June 1999.

Do You Know That Your Laminates May Contain Hollow Fibers? K. Rogers, P. Driessche, C. Hillman, and M. Pecht, Printed Circuit Fabrication, Vol. 22, No. 4, pp. 34-38, April 1999.

Failure Analysis of Liquid Crystal Displays Due to Indium Tin Oxide Breakdown, T. Dishongh, M. Dube, M. Pecht, and J. Wyler, ASME Journal of Electronic Packaging, Vol. 121, No. 2, pp. 126-127, June 1999.

Lifetime Resistance Model of Bare Metal Electrical Contacts, M. Sun, M. Pecht, M. Natishan, and R. Martens, IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part B (Advanced Packaging), Vol. 22, No. 1, February 1999.

Moisture Sensitivity Characterization of Build-up Ball Grid Array Substrates, M. Pecht, IEEE Transactions on Advanced Packaging, Vol. 22, No. 3, pp. 515-523, August 1999.

Nano-to-Millimeter Scale Integrated Systems, H. Last, M. Deeds, D. Garvick, R. Kavetsky, P. Sandborn, E. Magrab, and S. Gupta, IEEE Transactions on Components and Packaging Technologies, Vol. 22, No. 2, pp. 338-343, June 1999.

Part Manufacturer Assessment Process, M. Jackson, A. Mathur, M. Pecht, and R. Kendall, Quality and Reliability Engineering International, Vol. 15, pp. 457-468, 1999.

Solder Failure Mechanisms in Single-Sided Insertion-Mount Printed Wiring Boards, C. Hillman, K. Rogers, A. Dasgupta, M. Pecht, R. Dusek, and B. Lorence, Circuit World, Vol. 25, (3), pp. 28-38, 1999.

The Limiting Strength Properties of Nano-crystalline Materials, R. W. Armstrong, and G. D. Hughes, Advanced Materials for the 21stCentury, pp. 409-420, 1999.

The Small Appliance and Computer Industry: Do They Forget Reliability Lessons? A. Katz, IEEE Transactions on reliability,Vol. 48, No. 1, March 1999.

Tipping the Scales in Your Favor when Uprating, R. Biagini, M. Rowland, M. Jackson, and M. Pecht, IEEE Circuits & Devices Magazine, Vol. 15, Issue 4, pp. 15-23, July 1999.

Terminology on Use of Electronic Parts Outside the Manufacturer's Specified Temperature Ranges, L. Condra, R. Hoad, D. Humphrey, T. Brennom, J. Fink, J. Heebink, C. Wilkinson, D. Marlborough, D. Das, N. Pendse, and M. Pecht, IEEE Transactions on Components and Packaging Technology, Vol. 22, No. 3, pp. 355-356, September 1999.

Trends in Component Reliability and Testing, Y. Zhang, D. Das, A. Katz, M. Pecht, and O. Hallberg, Semiconductor International, pp. 101-106, September 1999.

Thermal Performance of a Compact Two-Phase Thermosyphon: Response to Evaporator Confinement and Transient Loads, C. Ramaswamy, Y. Joshi, W. Nakayama, and W. Johnson, Journal of Enhanced Heat Transfer, Vol. 6, No. 2-4, pp. 279-288, 1999.

Use of thermal analysis information in avionics equipment development, D. Das, Electronics Cooling, Vol. 5, No. 3, September 1999.

Mechanical fringe shifting in moire interferometry, B. han, D. Columbus, Z. Wu and J. Lu, Experimental Techniques, 16-19, January-February 1999.

Development of realtime/variable sensitivity warpage measurement technique and its application to plastic ball grid array package , Kaushal Verma, Derek Columbus and Bongtae Han, IEEE Transactions on Electronics Packaging Manufacturing, Vol 22, No 1, 63-70, January, 1999.

Published in 1998

Back to the Top

---

Study of residual stress distribution by a combined method of moire interferometry and incremental hole drilling, Part II: Implementation , Zhu Wu, Jian Lu and Bongtae Han, Journal of Applied Mechanics, Vol 65, 844-850, December 1998.

Study of residual stress distribution by a combined method of moire interferometry and incremental hole drilling, Part I: Theory , Zhu Wu, Jian Lu and Bongtae Han, Journal of Applied Mechanics, Vol 65, 837-843, December 1998.

Physics-of-Failure Guidelines For Accelerated Qualification of Electronic Systems , K. Upadhyayula and A. Dasgupta,Quality And Reliability Engineering International 14, pp 433-447, 1998.

Fundamental Overview of Accelerated-Testing Analytic Models, H. Caruso and A. Dasgupta, 1998 Proceedings Annual Reliability and Maintainability Symposium, pp. 389-393, 1998.

Decision Support System for High Temperature Electronics, P. McCluskey, M. Osterman, R. Jain, N. Tiwari, R. Grzybowski, T. Lin, and J. Benoit, Fourth International High Temperature Electronics Conference, pp. 176-180, June 14-18, 1998.

The Effect of Metal Vias on the Mechanical Properties of Cofired Ceramics: Three Dimensional Considerations, K. Hines and D. Barker, Proceedings of International Symposium on Microelectronics, Vol. 3582, pp. 491-496, San Diego, CA, Nov. 1-4, 1998.

Passive Thermal Control of Electronic Equipment, Y. Joshi, Applied Computational Fluid Dynamics, Chapter 8, Marcel Dekker, Inc. 1998.

A Case Study of IC Storage Failures in Taipei Trains, Y. Zhang, M, Pecht, and L. Lantz, Microelectronics Reliability, Vol. 38, No. 12, pp. 1811-1816, December 1998.

Low Temperature Delamination of Plastic Encapsulated Microcircuits, P. McCluskey, F. Lilie, O. Beysser, and A. Gallo, Microelectronics Reliability, Vol. 38, pp. 1829-1834, 1998.

High Temperature Performance of Polymer Film Capacitors, R. Grzybowski and P. Mccluskey, International Journal of Microelectronic Packaging, Vol. 1, pp. 153-158, 1998.

Application of Block-Implicit Multigrid Approach to Heat transfer Problems Involving Discrete Heating, L. Tang and Y. Joshi, ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA., November 16-17, 1998.

A Critique of the Reliability Analysis Center's Failure Rate Model for Plastic Encapsulated Microcircuits, N. Sinnadurai, A. Shukla, and M. Pecht, IEEE Transactions on Reliability, Vol. 47, No. 2, pp. 110-113, June 1998.

Characterization of a Non-woven Randomly Dispersed Short Fiber Laminate, M. Pecht, K. Rogers, and A. Fowler, Circuit World, 24/3, pp. 34-37, 1998.

Cyanate Ester Die Attach Material for Radiation Hardened Electronic Packages, T. Shah, S. Danziger, K. Moores, and Y. Joshi, IEEE Adhesives in Electronics Symposium, Binghamton, N.Y. September 1998.

Characterizing the Thermal Performance of a Flow Through Electronic Module (SEM-E Format) Using a Porous Media Model, L. Tang, K. Moores, C. Ramaswamy, and Y. Joshi, Proceedings of the IEEE SEMITHERM XIV Symposium, pp. 68-77, San Diego, CA March 1998.

Combined Effects of Sub-Cooling and Operating Pressure on the Performance of a Two-Chamber Thermosyphon, C. Ramaswamy, Y. Joshi, W. Nakayama, and W. Johnson, Proceedings of I-Therm VI, pp. 349-355, Seattle, WA, 1998.

Design-of-Experiment Methods for Computational Parametric Studies in Electronic Packaging, A. Dasgupta, M. G. Pecht, and B. Mathieu, Finite Elements in Analysis and Design, Vol. 30, pp. 125-146, 1998.

The Effect of Corrosion on Shielding Effectiveness of a Zinc-Coated Steel Enclosure, S. Das, J. Neubel, B. Zand, D. Hockanson, J. Xie, and M. Pecht, the 1998 IEEE International Symposium on Electromagnetic Compatibility, pp. 1041-1046, Denver CO, August 1998.

Electronic Packaging: Cross-Discipline is the Only Discipline, M. Pecht, IEEE Transactions on Components, Packaging, and Manufacturing Technology - Part A, Vol. 21, No. 1, March 1998.

Getting the Quality and Reliability Terminology Straight S. Lee, A. Katz, and C. Hillman, IEEE Transactions on IEEE Transactions on Components, Packaging, and Manufacturing Technology-Part A, Vol. 21, No. 3, pp. 521-523, September 1998.

Guidelines for Physics-of-Failure Based Accelerated Stress Testing, K. Upadhyayula and A. Dasgupta, Annual Reliability and Maintainability Symposium, Anaheim, California, January 19-22, 1998.

Impact of Preconditioning Voltage Bias and Temperature on Reliability of Plastic Encapsulated Microcircuits, P. Sharma, K. Upadhyayula, L. Lantz, and M. Pecht, Microelectronics Reliability, Vol. 38, No. 4, pp. 581-584, 1998.

Impact of Underfill Filler Particles on Reliability of Flip Chip Interconnects, K. Darbha, J Okura, and A. Dasgupta, IEEE Transactions on Components, Packaging and Manufacturing Technology - Part A, Vol. 21, No. 2, June 1998.

Implementation of DFE in the Electronics Industry Using Simple Metrics for Cost, Quality, and Environmental Merit, C. Murphy, C. Mizuki, and P. Sandborn, Proceedings IEEE International Symposium on Electronics and the Environment, May 1998.

In-Situ Temperature Measurements of PQFPs During Infrared Reflow, M. Dube, T. Dishongh, K. Beatty, and M. Pecht, Circuit World, Vol. 24, No. 4, pp. 29-32, August 1998.

Integrating Environmental Inventory Analysis with Detailed Printed Circuit Board Fabrication Cost Modeling, P. Sandborn, Proceedings 19th AxESP/EPA Pollution Prevention & Control Conference, pp. 177-183, Jan. 1998.

An Investigation of 'Cannot Duplicate' Failure, R. Williams, J. Banner, I. Knowles, M. Natishan, and M. Pecht, Quality and Reliability Engineering International;, Vol. 14, pp. 331-337, 1998.

Korea's Focus on Market Dominance, M. Pecht, J. Bernstein, D. Searls and M. Peckerar, Semiconductor International, pp. 118-122, January 1998.

Low Temperature Delamination of Plastic Encapsulated Microelectronics, P. McCluskey, F. Lilie, O. Beysser, and A. Gallo,Proceedings of the 1998 International Acoustic Microimaging Symposium- IAMIS '98, Anaheim, CA, Feb. 26-27, 1998.

Material-Centric Modeling of PWB Fabrication: An Economic and Environmental Comparison of Conventional and Photovia Board Fabrication Processes, P. Sandborn and C. Murphy, IEEE Transactions on Components, Packaging, and Manufacturing Technology, Vol. 21, No. 1, pp. 97-110, April 1998.

A Multi-Disciplinary Sophomore Course in Electronics Packaging, J. Morris and P. McCluskey, Proceedings of the IEEE 48thElectronic Components & Technology Conference, Seattle, Washington, May 25-28, 1998.

Packaging of Electronics for High Temperature Environments, P. McCluskey, D. Das, J. Jordan, L. Condra, T. Torri, J. Fink, and R. Grztbowski, International Journal of Microcircuits and Electronics Packaging, Vol. 20, No. 3, 1998.

Packaging of Power Electronics for High Temperature Applications, P. McCluskey, D. Das, J. Jordan, L. Condra, R. Gryzbowski, T. Torri, and J. Fink, Advanced Microelectronics, Vol. 25, No. 1, pp. 19-24, Jan/Feb 1998.

Packaging Tradeoff Analysis: Predicting Cost and Performance During System Design, P. Sandborn and M. Vertal, IEEE Design & Test of Computers, July-September 1998.

Passive Thermal Control of Electronic Equipment, Y .Joshi, Applied Computation Fluid Dynamics, V. Garg, Ed., Marcel Dekker, Chapter 8, pp. 301-333, 1998.

Performing Design Tradeoffs for Advanced Printed Wiring Boards, P. Sandborn, CircuiTree, Spring 1998.

Performance of a Compact Two-Chamber Two-Phase Thermosyphon: Effect of Evaporator Inclination, Liquid Fill Volume and Contact Resistance, C. Ramaswamy, Y. Joshi, W. Nakayama, and W. Johnson, Proceedings of the International Heat Transfer Conference, Kyongju, South Korea, 1998.

Reliability Assessment of Electronic Components Exposed to Long-Term Non-Operating Conditions, P. McCluskey, E. Hakim, J. Fink, A. Fowler, and M. Pecht, IEEE Transactions on Components, Packaging and Manufacturing Technology, Part A, Vol. 21, No. 2, pp. 352-360, June 1998.

The Realism of FAA Reliability-Safety Requirements and Alternatives, M. Pecht, J. Boullie, E. Hakim, A. Jain, M. Jackson, I. Knowles, R. Shroeder, A. Strange, and J. Wyler, IEEE AES Systems Magazine, pp. 16-20, February 1998.

Reliability Assessment of Electronic Components Exposed to Long-Term Non-Operating Conditions, P. McCluskey, E. Hakim, J. Fink, A. Fowler, and M. Pecht, IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part A, Vol. 21, No. 2, pp. 352-359, June 1998.

Reliability Concerns in High Temperature Electronic Systems, P. McCluskey, R. Grzybowski, L. Condra, D. Das, J. Fink, J. Jordan, and T. Torri, 1998 Engineering Foundation Conference on High Temperature Electronic Materials, Devices and Sensors, San Diego, CA, February 22-27, 1998.

The Role of Physical Implementation in Virtual Prototyping of Electronic Systems, M. Lindell, P. Stoaks, D. Carey, and P. Sandborn, IEEE Transactions on Components, Packaging, and Manufacturing Technology, Vol. 21, No. 4, pp. 610-616, December 1998.

Thermal Management of an Avionics Module Using Solid-Liquid Phase Change Materials (PCMs), D. Pal and Y. Joshi, AIAA Journal of Thermophysics and Heat Transfer, Vol. 12, pp. 256-262, 1998.

Why a New Parts Selection and Management Program? B. Foucher, R. Kennedy, N. Kelkar, Y. Ranade, A. Govind, W. Blake, A. Mathur, and R. Solomon, IEEE Transactions on Components, Packaging, and Manufacturing Technology - Part A, Vol. 21, No. 2, pp. 375-378, June 1998.

Published in 1997

Back to the Top

---

CAD/E Requirements and Usage for Reliability Assessment of Electronic Products, M. Osterman, T. Stadterman, and R. Wheeler, Advances in Electronic Packaging, EEP-Vol. 19-1, pp. 927-938, 1997.

In Situ Study of Solder Paste Behaviour during Reflow Using the Hot-Stage Environmental Scanning Electron Microscope, M. Natishan, J. Powell, and K. Beatty, Journal of Electronics Manufacturing, Vol. 7, No. 1, pp. 29-40, March 1997.

Electronic Packaging and Reliability Research and Education for the 21st Century: the University of Maryland CALCE EPSC Program, Y. Joshi and M. Pecht, Proceedings of the 47th ECTC, San Jose, CA, 1997 ECTC Conference, pp. 585-588, 1997.

A National Course on Thermal Design of Electronic Products: Recent Experiences and a Proposal, Y. Joshi, A. Bar-Cohen, and S. Bhavnani, Proceedings of the 47th ECTC, San Jose, CA, 1997 ECTC Conference, pp. 579-584, 1997.

Accelerated Vibration Life Testing of Electronic Assemblies, T. Stadterman, W. Connon, and D. Barker, Proceedings of Institute of Environmental Sciences, pp. 233-238, 1997.

Application of Phase Change Materials (PCMs) to the Passive Thermal Control of a Plastic Quad Flat Packages, D. Pal and Y. Joshi, Thermal Management of Electronic Systems II, pp. 227-242, Kluwer Academic Publishers, Leuven, Belgium, 1997.

Application of Phase Change Materials to Thermal Control of Electronic Modules: A Computational Study, D. Pal and Y. Joshi, Journal of Electronic Packaging, Transactions of ASME, Vol. 119, pp. 40-50, 1997.

Applications of Wavelets for Cost Effective Vibrational Response Analysis of Electronic Circuit Card Assemblies, P. Dujari, K. Upadhyayula, A. Dasgupta, and B. Balachandran, Experimental/Numerical Mechanics in Electronic Packaging Proceedings, Society of Experimental Mechanics, Bellevue, Washington, June 2-4, 1997.

An Assessment of the Qualified Manufacturer List (QML), M. Pecht, J. Fink, E. Hakim, and J. Wyler, IEEE Aerospace and Electronic Systems, Vol. 12, No. 7, pp. 39-43, July 1997.

Cost Analysis Helpful in Design Planning, P. Sandborn, Electronic Engineering Times, pp. 96, April 14, 1997.

Criteria for the Assessment of Reliability Models, M. Pecht, A. Shukla, N. Kelkar, and J. Pecht, IEEE Transactions on Components, Packaging, and Manufacturing Technology - Part B, Vol- 20, No. 3, pp. 229-234, August, 1997.

Electronic Components Obsolescence, L. Condra, A. Anissipour, D. Mayfield, and M. Pecht, IEEE Transactions on Components, Packaging, and Manufacturing Technology - Part A, Vol. 20, No. 3, pp. 368-371, 1997.

Design Assessment of a Pressure Contact Connector System, R. Martens, M. Osterman, and D. Haislet, Circuit World, April 1997.

Economic Analysis of Test Process Flows for Multichip Modules Using Known Good Die, C. Murphy, M. Abadir, and P. Sandborn, Journal of Electronic Testing (JETTA), pp. 151-166, 1997.

Effect of Delamination on Moisture Accelerated Failures in Plastic Encapsulated Microcircuit, M. Pecht, Y. Ranade, and J. Pecht, Circuit World, Vol. 23, No. 4, pp. 11-15, 1997.

Effects of Orthotropic Thermal Conductivity of Substrates in Natural Convention Cooling of Discrete Heat Sources, E. Yu and Y. Joshi, Numerical Heat Transfer, Vol. 32, pp. 575-593, 1997.

Enabling Early Design for Manufacturability via the Web, P. Sandborn, Duratech Conference, Los Angles, CA, July 1997.

An Environmental and Economic Comparison of Additive and Subtractive Approaches for Printed Wiring Board Fabrication, C. Murphy, P. Sandborn, and J. Lott, Proceedings of the IEEE International Symposium on Electronics and the Environment, May 1997.

Evaluating the Cost Impact of Design-for-Environment Decisions Early in the Product Design Cycle, P. Sandborn and C. Murphy, Proceedings of the IPC Works, Washington D.C., pp. S03-9-1 to S03-9-7, October 1997.

Experimental Determination of the Shear Modules of Complaint Adhesives Using Single Lap Shear Tests, L. Roy, D. Barker, and H. Tomey, Experimental/Numerical Mechanics in Electronic Packaging, Society of Experimental Mechanics, Vol. 1, pp. 93-101, 1997.

Finite Element Modeling Issues in Thermomechanical Stress Analysis of Surface Mount Interconnects, A. Dasgupta, K. Darbha, P. Haswell, P. Sharma, S. Sealing, and K. Upadhyayula, Presented at the Symposium on Application of FEM and BEM to Electronic Packaging at the 1997 ASME/ASCE/SES Joint Conference, July 1997.

Flat Panel Displays- What is Going on in East Asia Outside Japan, M. Pecht and C. Lee, Circuit World, Vol. 24, No. 1, pp. 20-27, November 1997.

Heat Transfer from Micro-Finned Surfaces to Flow of Fluorinate Coolant in Reduced-Size Channels, H. Mizunuma, M. Behnia, and W. Nakayama, IEEE Transactions on Components, Packaging and Manufacturing Technology - Part A, Vol. 20, No. 2, pp. 138-145, June 1997.

Hollow Fibers in PCB, MCM-L and PBGA Laminates May Induce Reliability Degradation, A. Shukla, M. Pecht, J. Jordan, K. Rogers, and D. Jennings, Circuit World, Vol. 23, No. 2, pp. 5-6, 1997.

Hollow Fibers in Woven Laminates, A. Shukla, T. Dishongh, M. Pecht, and D. Jennings, Printed Circuit Fabrication, Vol. 20, No. 1, pp. 30-32, January 1997.

How Burn-In Can Reduce Quality and Reliability, J. Jordan, M. Pecht, and J. Fink, The International Journal of Microcircuits and Electronic Packaging, Vol. 20, No. 1, pp. 36-40, First Quarter, 1997.

An Incremental Damage Superposition Approach for Interconnect Reliability Under Combined Accelerated Stresses, K. Upadhyayula, and A. Dasgupta, ASME International Mechanical Engineering Congress & Exposition, Dallas, November 16-21, 1997.

In-Situ Measurements of Surface Mount IC Package Deformations During Reflow Soldering, M. Pecht and A. Govind, IEEE Transactions on Components, Packaging and Manufacturing Technology - Part C, Vol. 20, No. 3, pp. 207-212, July 1997.

Integrated Thermal Analysis of Indirect Air-Cooled Electronic Chassis , L. Tang and Y. Joshi, IEEE Transactions on Components, Packaging and Manufacturing Technology - Part A, Vol. 20, No. 2, pp. 103-110, June 1997.

Issues in Validating Package Compact Thermal Models for Natural Convection Cooled Electronic Systems, V. Adams, D. Blackburn, Y. Joshi, and D. Berning. Presented at the Thirteenth IEEE Semi-Therm Symposium - Part A, Vol. 20, No. 4, pp. 420-431, December 1997.

Kinetic Modeling of Corrosion Film on Unloaded Precious Metal Plated Contacts, M. Sun, S. Javadpour, R. Martens, and M. Pecht, Proceeding of 30th International Connector & Interconnection Technology Symposium 1997, USA, pp. 227-244, 1997.

Life Prediction Models in Electronic Packaging using Finite Element Analysis and Design of Experiments, S. Sidharth and D. Barker, Experimental/Numerical Mechanics in Electronic Packaging, Society for Experimental Mechanics, Vol. 1, pp. 126-135, 1997.

Liquid Cooling of Electronic Equipment: Where does it Offer Viable Solutions?, W. Nakayama, Advances in Electronic Packaging, ASME, Vol. 2, pp. 2045-2052, 1997.

Manufacturability of Lead-Free Solders, T. Dishongh, C. Tu, and K. Beatty, Second Workshop on Temperature Power Electronics for Vehicles, Adelphi, MD, April 1997.

Material-Centric Process Flow Modeling of PWB Fabrication and Waste Disposal, P. A. Sandborn, J. W. Lott, and C. F. Murphy, Proceedings of IPC Printed Circuits Exposition, pp. S10-4-1 to S10-4-12, March 1997.

Maximizing Yield and Reliability in Surface Mount Manufacturing - Thermal Adhesive Application, J. Powell, E. Beatty, A. Dasgupta, and M. Natishan, Future Circuits International, 1997.

Miscellaneous Modeling Issues in Thermomechanical Stress Analysis of Surface Mount Interconnects, A. Dasgupta, D. Darbha, P. Dujari, P. Haswell, S. Ling, P. Sharma, S. Sealing, and K. Upadhyayula, INTERpack'97, ASME International, Intersociety Electronic and Photonic Packaging Conference, June 1997.

Modeling the Impact of Packaging During High-Level System Design: The Integration of Physical Partitioning into Virtual Prototyping, P. Stoaks and P. Sandborn, Proceedings of the High-Level Electronic Design Conference, San Jose, CA, pp. 197-204, October 1997.

A New Educational Program in Electronic Packaging and Reliability (EPAR), Y. Joshi, D. Barker, and M. Ojalvo, Journal of Engineering Education, Vol. 86, pp. 183-187, April 1997.

A Non-Linear Multi-Domain Thermomechanical Stress Analysis Method for Surface Mount Solder Joints- Part II: Viscoplastic Analysis, S. Ling and A. Dasgupta, ASME Journal of Electronic Packaging, Vol. 119, No. 3, pp. 177-182, September 1997.

Packaging of Electronics for High Temperature Applications, P. McCluskey, D. Das, J. Jordan, R. Grzybowski, J. Fink, L. Condra, and T. Torri, International Journal of Microcircuits and Electronic Packaging, Vol. 20, No. 3, 3rd Quarter, 1997.

Packaging Geometry Considerations in Thermal Compact Modeling Strategies, V. Adams, D. Blackburn, and Y. Joshi, Eurotherm Seminar, No. 58, Thermal Management of Electronic Systems, Nantes, France, pp. 136-144, September 1997.

Performing Design Tradeoffs for Advanced PWBs, P. Sandborn, IPC National Conference on Organic High Density Interconnect Structures, Santa Clara, CA, pp. 131-149, Nov. 1997.

Perspectives to Understand Risks in the Electronic Industry, A. Dasgupta, E. Magrab, D. Anand, K. Eisinger, J. McLeish M. Torres, P. Lall, and T. Dishongh, IEEE Transaction on Components Packaging and Manufacturing Technology - Part A, Vol. 20, No. 4, pp. 542-547, December 1997.

Plastic-Encapsulated Microcircuits (PEMs): Long-Term Dormancy Studies, E. Hakim, J. Fink, S. Tam, P. McCluskey, and M. Pecht, Circuit World, Vol. 23, No. 4, pp. 26-29, 1997.

Popcorning in PBGA Packages During IR Reflow Soldering P. McCluskey, R. Munamarty, and M. Pecht, Microelectronics International, pp. 20-23, January 1997.

Procedure for Evaluation of Thermal Management Requirement in a Laser Diode Structure, R. Kamath and P. Mead, Microelectronic Reliability, Vol. 37, No. 12, pp. 1817-1823, 1997.

Pushing the Limit, P. McCluskey and M. Pecht, Advanced Packaging, pp. 36-39, January 1997.

Reducing Time-to-Market Using Virtual Qualification, P. McCluskey, M. Pecht and S. Azarm, Proceedings, Institute of Environmental Sciences, pp. 148-152, 1997.

Reliability Assessment of a Plastic Encapsulated RF Switching Device, R. Mahajan and M. Pecht, Microelectronics Reliability, Vol. 38, pp. 1607-1610, December 1997.

"Smart" Electronic Systems for Condition-Based Health Management, N. Kelkar, A. Dasgupta, M. Pecht, I. Knowles, M. Hawley, and D. Jennings, Quality and Reliability Engineering International, Vol. 13, pp. 3-7, 1997.

Stress Analysis of Surface-Mount Interconnects Under Vibrational Loading, K. Darbha, S. Ling, and A. Dasgupta, ASME Journal of Electronic Packaging, September 1997.

System-Level Impact of Early Packaging Decisions, C. Palesko and P. Sandborn, Proceedings of INTERpack, June 1997.

Temperature as a Reliability Factor, M. Pecht, P. Lall, and E. Hakim, Thermal Management of Electronic System II, Kluwer Academic Publishers, Belgium, pp. 27-41, 1997.

Thermomechanical Durability Analysis of Flip Chip Solder Interconnects Without Underfill, K. Darbha, J. Okura, A. Dasgupta, and M. Caers, ASME Winter Annual Conference: 9th Symposium on Mechanics of Surface Mount Assemblies,November 1997.

Thermomechanical Stress Analysis of BGA Interconnects Using the MDRR Technique, S. Ling and A. Dasgupta, Advanced Electronic Packaging, pp. 1109, 1997.

Uprating Electronic Components for Use Outside Their Temperature Specification Limits, M. Wright, D. Humphrey, and P. McCluskey, IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part A, Vol. 20, No. 2, pp. 252-256, June 1997.

Published in 1996

Back to the Top

---

An integrated surface mount virtual factory based on mechanistic process simulations Part I - Overall Approach, Y .Joshi et al., ASME Winter Annual Meeting Conference, Atlanta, Georgia, Nov. 17-22, 1996.

An integrated surface mount virtual factory based on mechanistic process simulations Part II - Examples of Virtual Factory Models for Surface Mount Manufacturing, Y .Joshi et al., ASME Winter Annual Meeting Conference, Atlanta, Georgia, Nov. 17-22, 1996.

Accelerated Life Test Development for Combined Stresses, K. Upadhyayula and A. Dasgupta, VIII International Congress on Experimental/Numerical Mechanics in Electronic Packaging, Sponsored by Society of Experimental Mechanics, Nashville, TN, pp. 35-36, June 10-13, 1996.

Accelerated Testing of CCAs Under Combined Temperature-Vibration Loading, K. Upadhyayula and A. Dasgupta,Workshop on Accelerated Stress Testing, Sponsored by IEEE Components, Packaging, and Manufacturing Technology Society, Ottawa, Canada. October 17-18, 1996.

A Isochromatic fringe sharpening and interpolation along an isoclinic contour, with application to fracture mechanics, B. Han and A.L. Wang, Experimental Mechanics, Vol 36, No 4, 305-311, December, 1996.

A Effect of substrate CTE on solder ball reliability of flip chip ball grid array package assembly, Bongtae Han, Mona Chopra, Seungbae Park, Li Li and Kaushal Verma, Journal of Surface Mount Technology, 25-34, October, 1996.

A Verification of numerical models used in microelectronics packaging design by interferometric displacement measurement methods, B. Han, Y. Guo, C.K. Lim and D. Caletka, Journal of Electronic Packaging, Vol 118, 157-163, September, 1996.

A Comparison of Routing Estimation Methods for Microelectronic Modules, P. Sandborn and P. Spletter, Proceedings of the International Electronic Packaging Conference, pp. 651-663, Sept-Oct, 1996.

Air Cooling of a Component Mounted on a Vertical Substrate in a Vented Enclosure by Combined Conduction, Natural Convection and Radiation, E. Yu and Y. Joshi, Presented at the ASME International Mechanical Engineering Congress and Exhibition, Atlanta, GA, November 1996.

Air Cooling of a Vented Enclosure by Combined Conduction, Natural Convection and Radiation, E. Yu and Y. Joshi, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Atlanta, GA, HTD-Vol. 333, pp. 323-330, Nov. 1996.

Application of Phase Change Materials for Passive Thermal Control of Plastic Quad Flat Packages: A Computational Study, D. Pal and Y. Joshi, Numerical Heat Transfer - Part A, Vol. 30, pp. 19-34, 1996.

Characterizing the Commercial Avionics Thermal Environment for Field Reliability Assessment, K. Cluff, D. Barker, D. Robbins and T. Edwards, Proceedings-Institute of Environmental Sciences, pp. 50-57, 1996.

Comparison Between Repetitive and Electrodynamic Vibration Test Machines for Accelerated Stress Application, P. Dujari, A. Dasgupta, and B. Balachandran, Workshop on Accelerated Stress Testing, Sponsored by IEEE Components, Packaging, and Manufacturing Technology Society, Ottawa, Canada, October 17-18, 1996.

Conjugate Heat Transfer from a Single Surface-Mounted Block of Forced Convective Air Flow in a Channel, W. Nakayama and S. Park, ASME Journal of Heat Transfer, Vol. 118, pp. 301-309, 1996.

Cost and Environmental Metrics for a High Density Laminate Technology, C. Murphy and P. Sandborn, Proceedings of the Sixteenth International Electronics Manufacturing Technology Symposium (IEMT), Austin, TX, Oct. 1996.

A Crack-Qualification Procedure for SMDs, R. Gannamani and R. Munamarty, SMT, pp. 52-53, April 1996.

The Effect of Wipe on Corroded Nickel Contacts, R. Martens and M. Pecht, Conference on Electrical Contacts. Joint with the 18th International Conference on Electrical Contacts, pp. 342-351, New York, NY, 1996.

Elastic, Plastic and Cracking Indentation Behaviour of Silicon Crystals, R. Armstrong, A. Ruff, and H. Shin, Materials Science and Engineering,  Elsevier, A209, pp. 91-96, 1996.

Electronic Assemblies, M. Pecht, D. Burkus and S. Bhagath, Handbook of Manufacturing Engineering, Marcel Dekker, Chapter 22, pp. 1027-1092, New York, NY, 1996.

Electronic Hardware Reliability, M. Pecht and I.M. Bordelon, The Electronics Handbook, CRC Press, Boca Raton, FL, pp. 2160-2170, 1996.

The Emergence of "Physical Synthesis" - Optimization of a System's Physical Implementation During Design Planning, P. Sandborn, C. Palesko, D. Gullickson, and K. Drake, Proceedings ACM/SIGDA Physical Design Workshop, pp. 228-233, 1996.

An Experimental Study of Popcorning in Plastic Encapsulated Microcircuits, R. Gannamani and M. Pecht, IEEE Transactions on CPMT - Part A, Vol. 19, No. 2, pp. 194-201, June 1996.

Forced Convection Air Cooling of a Commercial Electronic Chassis: An Experimental and Computational Case Study, C. Argento, Y. Joshi, and M. Osterman, IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 19, No.2, pp. 248-257, June 1996.

Framework for an Objective and Process Based Reliability Program Standard, A. Malhotra, A. Strange, L. Condra, I. Knowles, T. Stadterman, J. Boivin, A. Walton, and M. Jackson, Communications in RMSL, pp. 25-30, January 1996.

Heat Transfer from an Array of Strips to Fluorinert Coolant in Mixed Impinging-Jet/Channel-Flow Configuration, W. Nakayama, M. Behnia, H. Mishima, and H. Sun, ASME Journal of Electronic Packaging, Vol. 118, pp. 31-36, 1996.

Heat Transfer from Grooved Surfaces to Flow of Fluorinert Coolant in Reduced-Size Channels, H. Mizunuma, M. Behnia, and W. Nakayama, ITHERM '96, Orlando, FL, pp. 274-283, May 29 - June 1, 1996.

How Burn-in Can Reduce Quality and Reliability, J. Jordan and M. Pecht, Proceedings-Institute of Environmental Sciences, pp. 16-19, 1996.

An Integrated Surface-Mount Virtual-Factory Based on Mechanistic Process Simulations: Part I - Overall Approach, K. Darbha, A. Poddar, C. Ramaswamy, C. Sealing, L. Tang, K. Upadhayayula, A. Dasgupta, and Y. Joshi. ASME International Mechanical Engineering Congress and Exhibition, Atlanta, GA, November 1996.

Integrated Thermal Analysis of Natural Convection Air Cooled Electronic Enclosure, L. Tang and Y. Joshi. Proceedings of the National Heat Transfer Conference Vol. 329, pp. 211-217, Aug. 1996.

Issues Affecting Early Affordable Access to Leading Electronics Technologies by the US Military and Government, M. Pecht, Circuit World, Vol. 22, No. 2, pp. 7-15, 1996.

Integrated Thermal Analysis of Indirect Air-Cooled Electronic Chassis, L. Tang and Y. Josh, I-Therm '96, Proceedings of the 5th Intersociety Conference on Thermal Phenomena in Electronic Systems, pp. 217-225, Orlando, FL, May 1996.

Life Cycle Approach to Design and Manufacturing Simulation of Multi-Chip Modules, M. Pecht and P. Lall, International Journal of Modeling and Simulation, Vol. 16, No. 4, pp. 173-183, 1996.

Life Test Development for Combined Stresses, K. Upadhyayula and A. Dasgupta, VIII International Congress on Experimental/Numerical Mechanics in Electronic Packaging, Sponsored by Society of Experimental Mechanics, Nashville, TN, pp. 35-36, June 10-13, 1996.

Linking System Design to Manufacturing, P. Sandborn, Printed Circuit Fabrication, Vol. 20, No. 3, pp. 32-37, March 1997.  Also in the Proceeding IPC National Conference on Solutions for Ultra High Density PWBs, Los Angeles, CA, October 1996.

Natural Convection From a Horizontal Printed Circuit Board in an Enclosure, S. Vikram and Y. Joshi, Proceedings of the 9th International Symposium on Transport Phenomena in Thermal Engineering, Singapore, Vol. 1, pp. 486-491, June 25-28, 1996.

A Nonlinear Multi-Domain Stress Analysis Method for Surface-Mount Solder Joints, S. Ling and A. Dasgupta, Journal of Electronic Packaging, Vol. 118, No. 2, pp. 72-79, June 1996.

Optimizing the Design of High-Density Systems, P. Sandborn, Electronic Packaging & Production, pp. 53-60, September 1996.

Optimum Processing Prevents PQFP Popcorning, P. Yalamanchili, R. Gannamani, R. Munamarty, P. McCluskey and A. Christou, Surface Mount Technology: Supplemental Guide to Soldering, pp. 9, January 1996.

Packaging Reliability for High Temperature Electronics: A Materials Focus, P. McCluskey, L. Condra, T. Torri and J. Fink, Microelectronics International, No. 41, pp. 23-26, September 1996.

Design for Environment - A Survey of Current Practices and Tools C. Mizuki, P. A. Sandborn, and G. Pitts, G., Proceedings of IEEE International Symposium on Electronics and the Environment, pp. 1-6, May 1996.

Performing Design for Environment Concurrent with Interdisciplinary Tradeoff Analysis of Electronic Systems, P. Sandborn and G. McFall, Proceedings of IEEE International Symposium on Electronics and the Environment, pp. 167-172, May 1996.

Phenomenological Reliability Modeling of Plastic Encapsulated Microcircuits, N. Kelkar, A. Fowler, M. Pecht, and M. Cooper, ISHM International Journal of Microcircuits and Electronic Packaging, Vol. 19, No. 1, pp. 3-13, 1996.

Physics-of-Failure Methodology for Thermal Cycling of Solder Joints, T. Rothman, A. Dasgupta and P. Tsai, VIII International Congress on Experimental/Numerical Mechanics in Electronic Packaging, Sponsored by Society of Experimental Mechanics, Nashville, TN, pp. 76-77, June 10-13, 1996.

Plastic Encapsulated Microelectronics, M. Pecht, Engineering Magazine, pp. 22-23, September, 1996.

Plastic Encapsulated Microcircuit Reliability & Cost-Effectiveness Study, D. Emerson, E. Hakim, and A. Govind, IEEE Transactions on Reliability, Vol. 45, No. 1, pp. 19-22, March 1996.

Popcorning in Fully Populated and Perimeter Plastic Ball Grid Array Packages, R. Munamarty, P. McCluskey, M. Pecht, and L. Yip, Soldering & Surface Mount Technology, No. 22, pp. 46-50, February, 1996.

Popcorning in PBGA Packages During IR Reflow Soldering, Microelectronics International, No. 42, pp. 20-23, 1996.

Popcorning in Plastic Ball Grid Arrays During IR Reflow Soldering, P. McCluskey, R. Munamarty, and M. Pecht, Proceedings of the International Acoustic Micro Imaging Symposium, San Diego, CA, pp. 46-50, Jan. 1996.

Prospects for Taiwan's Electronic Components Industry, M. Pecht, and C. Lee, Solid State Technology, pp. 11-14, November 1996.

Reliability Assessments of Fielded Plastic and Hermetically Packaged Microelectronics, B. Johnson, and V. Verma, IEEE Transactions on Reliability, Vol. 45, No. 1, pp. 23-26, March 1996.

Reliability of Surface Mount Capacitors Subjected to Wave Soldering, T. Panchwagh and P. McCluskey, International Journal of Microelectronics Packaging, Vol. 2, No. 1, February 1996.

The Role of Heat Transfer Analysis in Avionics Equipment Development, D. Das and M. Pecht, ASME Proceedings of the 32nd National Heat Transfer Conference, Vol. 7, HTD-Vol. 329, pp. 197-209, August. 1996.

Smart Electronic Systems for Condition-Based Health Management, N. Kelkar, A. Dasgupta, M. Pecht, I. Knowles, M. Hawley, and D. Jennings Proceedings of 9th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM), Sheffield, UK, pp. 591-601, July 1996.

Software for Reliability Assessment of Electronic Components, Circuit Cards and Equipment, P. McCluskey, M. Pecht, and M. Osterman, Proceedings of the Second International Symposium on Electronic Packaging Technology, Shanghai, China, pp. 472-483, December 9-12, 1996.

Temperature Cycling of Gold to Gold Pressure Contact Connector System, R. Martens, M. Osterman, and D. Haislet, 1996 Annual Connector and Interconnection Technology Symposium, Boston, MA, pp. 409-420, September. 16-18, 1996.

Thermal Management of Electronic Equipment: Research Needs in the Mid 1900s and Beyond, W. Nakayama, ASME Applied Mechanics Reviews, Vol. 49, No. 10, Part 2, pp. 5167-5174, October 1996.

Vibration Induced Fatigue Life Estimation of Corner Leads of Peripheral Leaded Components Peripheral Leaded Components, S. Sidharth and D. Barker, ASME Journal of Electronic Packaging, Vol. 118, pp. 224-249, December 1996.

Why the Traditional Reliability Prediction Models Do Not Work - Is There an Alternative?, M. Pecht, Electronics Cooling, Vol. 2, pp. 10-12, January 1996.

Published in 1995

Back to the Top

---

Accelerated Stress Testing of Surface Mount Solder Joints: A Case Study, T. Rothman, A. Dasgupta, and M. Binder, 41st Annual Conference, Institute of Environmental Sciences, Anaheim, CA, May 1995.

Addressing Defect-Related Reliability and Screening Levels Through Physics of Failure Analysis, R. Bauernschub and P. Lall, Proceedings of the INTERpack'95, Lahaina, Maui, HI, pp. 635-645, March 26-30, 1995.

Advisors Can Ease Physical Design, P. Sandborn, Electrical Engineering Times, June 12, 1995.

Application of Line Modified-Asymmetric Crystal Topography for Qualitative and Quantitative Evaluation of Integrated Circuits, K. Green, W. Beard, X. Zhang, and R. Armstrong, Advanced in X-Ray Analysis, Vol. 38, 1995.

Application of Phase Change Materials for Passive Thermal Control of Plastic Quad Flat Packages (PQFP): A Computational Study, D. Pal and Y. Joshi. Proceedings of Semi-Therm 1995, San Jose, CA, pp. 65-71, February 1995.

Application of Phase Change Materials (PCMs) to the Passive Thermal Control of a Plastic Quad Flat Package: Effect of Orientation of the Package, D. Pal and Y. Joshi, Eurotherm Seminar No. 45, Thermal Management of Electronic Systems,Leuven, Belgium, September 1995.

Application of Phase Change Materials to Thermal Control of Electronic Modules: A Computational Study, D. Pal and Y. Joshi, Proceedings of the INTERpack'95, Lahaina, Maui, HI, pp. 1307-1315, March 26-30, 1995.

An Approach to Simplify Thermal Modeling of Natural Convection Cooled Electronic Equipment, V. Maudgal and Y. Joshi, Proceedings of 45th Electronic Components & Technology Conference, Las Vegas, NV, May 1995.

The Aries Project for Rule-Based-Design Knowledge Acquisition, K. Richter, C. Grewe, A. Hashmi, D. Hoffman, R. Johnson, and D. Ott, Institute for Defense Analyses, IDA Paper P-3074, June 1995.

Beyond the Qualified Manufacturer List (QML), E. Hakim, C. Rust, and W. Olsson, Proceedings Annual Reliability and Maintainability Symposium, Washington DC, pp. 362-369, January 16-19, 1995.

Characterization of Functional Relationship Between Temperature and Microelectronic Reliability, P. Lall, M. Pecht, and E. Hakim, Microelectronics and Reliability, Vol. 35(3), pp. 377-402, March 1995.

Computations of Solid/Liquid Phase Change in a Three-Dimensional Enclosure by a Uniformly Dissipating Heat Source,D. Pal and Y. Joshi, ASME National Heat Transfer Conference, Portland, OR, August 1995.

Computations for a Three-by-three Array of Protrusions Cooled by Liquid Immersion: Effect of Substrate Thermal Conductivity, D. Mukutmoni, Y. Joshi, and M. Kelleher, Journal of Electronic Packaging Transactions of the ASME, Vol. 117, pp. 294-300, December 1995.

Consideration of Component Failure Mechanisms in the Reliability Assessment of Electronic Equipment Addressing the Constant Failure Rate Assumption, D. Mortin, J. Krolewski, and M. Cushing, 1995 Proceedings Annual Reliability and Maintainability Symposium, 1995.

Control of Popcorning by Using Optimized Process Conditions, P. McCluskey, 1995 Advanced Technology Acquisition, Qualification & Reliability Workshop, August 1995.

Does the Cooling of Electronics Increase Reliability?, A. Dasgupta and M. Pecht, Proceedings of Thermal Stresses '95 Conference, No. 231, 1995.

The Effect of Manufacturing and Design Process Variabilities on the Fatigue Life of the High Density Interconnect Vias, A. Ogunjimi, S. MacGregor, M. Pecht, and J. Evans, Journal of Electronics Manufacturing, Vol. 5, No. 2, pp. 111-119, June 1995.

Elastic/Plastic Effects During Very Low-load Hardness Testing of Copper, R. Armstrong, H. Shin, and A. Ruff, Acta metall.mater., Vol. 43, No. 3, pp. 1037-1043, 1995.

Electrochemical Migration in Multichip Modules, B. Rudra, M. Li, M. Pecht, and D. Jennings, Circuit World, Vol. 22, No. 1, pp. 67-70, 1995.

Electronic Box-level Reliability Assessment Using Computer Modeling and Simulation, D. Barker, A. Chiang, J. Krolewski, and M. Cushing, Proceedings Annual Reliability & Maintainability Symposium, 1995, pp. 49-53, January 1995.

Electronic Packaging, M. Pecht and P. McCluskey, CALCE EPRC, 1995.

Electronic Packaging and Reliability Research at the University of Maryland, M. Ojalvo, International Journal of Microelectronic Packaging, Vol. 1, pp. 35-42, 1995.

Environmental Scanning Electron Microscope, M. Li, K. Rogers, and C. Rust, Advanced Materials & Processes, pp. 24-25, July 1995.

Environmental Scanning Electron Microscopic Investigation of Failure Mechanisms in Electronic Packages, J. Li and M. Pecht, Journal of Electronic Packaging Transactions of ASME, Vol. 117, pp. 225-229, September 1995.

Experimental and Numerical Studies on Three-Dimensional GTA Weldpool Convection: Non-Axis Symmetric Effects, Y. Joshi, P. Dutta, P.E. Schupp, and D. Espinosa, 1995 ASME Winter Annual Meeting, San Francisco, CA, November 1995.

Exploratory Research on Non-Thermal Damage due to Electronics from Fires and Fire-Suppression Agents, F. Mowrer, and M. Pecht, 1995 Proceedings Annual Reliability and Maintainability Symposium, pp. 1-6, January 1995.

Foundational Issues Concerning the Analysis of Censored Data, R. Barlow and P. Tsai, Lifetime Data Analysis, Vol. 1, No. 1, pp. 27-34, 1995.

Framework for a Dual-Use Standard for Reliability Program, I. Knowles, A. Malhotra, R. Munamarty, and T. Stadterman, Proceedings of 1995 Annual Reliability & Maintainability Symposium, pp. 481-493, January 1995. Proceedings of 1995 Annual Reliability & Maintainability Symposium, pp. 144-151, January 1995.

A Generalized Multi-Domain Approach for Thermo-Mechanical Stresses in J-Lead Solder Joints: Elastic Analysis, S. Ling and A. Dasgupta, ASME Interpack'95, Maui, HI, May 1995.

Heat Transfer Engineering in Systems Integration: Outlook for a Closer Coupling of Thermal and Electrical Designs of Computers, W. Nakayama, IEEE Transfer Components, Packaging, and Manufacturing Technology - Part A, Vol. 18, No. 4, pp. 818-826, 1995.

Impact of Packaging Technology on System Partitioning:  A Case Study, P. Dekhordi, K. Ramamurthi, D. Bouldin, H. Davidson, and P. Sandborn, Proceedings of the IEEE Multichip Module Conference, Santa Cruz, CA, February. 1995.

An Integrated Design Environment for Printed Wiring Boards, M. Rosman and M. Osterman, Proceedings of the INTERpack'95, Lahaina, Maui, HI, pp. 149-157, March 26-30, 1995.

A Layer-Wise Analysis for Free Vibration of Thick Composite Cylindrical Shells, K. Huang and A. Dasgupta, Journal of Sound and Vibration, Vol. 186, No. 2, pp. 207-222, 1995.

Long Term Storage Reliability of Plastic Encapsulated Microcircuits, A. Fowler, P. McCluskey, and K. Rogers, Proceedings of 1995 Advanced Technology, Acquisition, Qualification, and Reliability Workshop, Newport Beach, CA, pp. 269-278, August 1995.

Magnetostrictive Constitutive Properties: What is Available and What is Needed, K. Kannan and A. Dasgupta, ASME Summer Meeting, Los Angeles, CA, June 1995.

Modeling Solder Joint Fatigue Life for Gullwing Leaded Packages: Part II - Creep Model and Life Calculation, V. Gupta, D. Barker, and A. Dasgupta, Proceedings of the INTERpack'95, Lahaina, Maui, HI, pp. 1043-1057, March 26-30, 1995.

Multichip Modules, Design, Fabrication, and Testing, P. Sandborn and M. Abadir, chapter in Multichip Module Design, J. J. Licari editor, McGraw-Hill, Inc., pp. 21-78, 1995.

A Multi-Domain Stress Analysis Method for Surface-Mount Solder Joint, S. Ling and A. Dasgupta, Proceedings of the INTERpack'95, Lahaina, Maui, HI, pp. 991-1000, March 26-30, 1995.

Natural Convection from an Array of Electronic Packages Mounted on a Horizontal Board in a Narrow Aspect Ratio Enclosure, V. Adams, Y. Joshi, and D. Blackburn, Second ISHMT-ASME Heat and Mass Transfer Conference, Surathkal, India, December. 1995.

A New Graduate Program in Electronic Packaging and Reliability (EPAR), Y. Joshi and D. Barker, Eleventh Biennial University/Government/Industry Microelectronics Symposium, Austin, TX, May 1995.

Nonlinear Finite Element Analysis Results for Magnetostrictive Smart Structures, K. Kannan and A. Dasgupta, Second Workshop on Smart Structures and Materials, Sponsored by ARO, UMCP, September 5-7, 1995.

A Non-Linear Multi-field Stress Analysis Model for Solder Joint Interconnect, S. Ling and A. Dasgupta, ASME International Mechanical Engineering Congress, San Francisco, CA, November. 1995.

A Numerical Study of Three Dimensional Laminar Natural Convection in a Vented Enclosure, E. Yu and Y. Joshi, ASME National Heat Transfer Conference, Portland, OR, August 1995.

Optimum Processing Prevents PQFP Popcorning, P. Yalamanchili, R. Gannamani, R. Munamurty, P. McCluskey, and A. Christou, Surface Mount Technology, May 1995.

The Physics of Conductive Filament Formation in MCM-L Substrates, M. Li, M. Pecht, and L. Wang, Proceedings of the INTERpack'95, Lahaina, Maui, HI, pp. 517-527, March 26-30, 1995.

Physics-of-Failure: An Approach to Reliable Product Development, M. Pecht and A. Dasgupta, Journal of the Institute of Environmental Sciences, Vol. 38, pp. 30-34, September/October 1995 also in 1995 International Integrated Reliability Workshop Final Report, Lake Tahoe, CA, pp. 1-4, October 22-25, 1995.

A Physics-of-Failure Design Philosophy Applied to Flip-Chip Bonds, C. Pusarla, A. Dasgupta, M. Pecht, and A. Christou, Microelectronics International, No. 36, pp. 6-12, January 1995.

Popcorning in Full and Perimeter Array PBGA Packages During IR Reflow, P. McCluskey, Area Array Packaging Conference, Berlin, Germany, November 1995.

Popcorning in Plastic Ball Grid Arrays During IR Reflow Soldering, P. McCluskey, R. Munamarty, and M. Pecht, IAMIS'95,San Diego, CA, January 27, 1995.

Qualifying Plastic Encapsulated Microcircuits Against Popcorning, R. Gannamani, R. Munamarty and P. McCluskey, Proceedings of 1995 Advanced Technology, Acquisition, Qualification, and Reliability Workshop, Newport Beach, CA, pp. 185-194, August 1995.

Relative Humidity Cycle Testing on GE-HDI, M. Li, X. Wu, M. Pecht, K. Paik, and E. Bernard, International Journal of Microelectronic Packaging, Vol. 1, pp. 13-34, 1995.

Reliability Issues in Micro Integrated Smart Material Systems, A. Dasgupta, SPIE Conference, Williamsburg, VA, 1995.

Reliability Issues in Plated-Through-Holes Due to Insertion-Mount Compliant-Pin Connectors, G. Ganguly and A. Dasgupta, Journal of Electronic Packaging Transactions of the ASME, Vol. 117, pp. 147-152, December. 1995.

A Reliability Study of Fuzz Button Interconnects, D. Harris and M. Pecht, Circuit World, Vol. 21, No. 2, pp. 12-18, 1995.

Response of Adaptive Structures with Embedded Mini-Actuators, A. Alghamdi and A. Dasgupta, Second Workshop on Smart Structures and Materials, Sponsored by ARO, UMCP, September 5-7, 1995.

Simulation of the Influence of Manufacturing Quality on Reliability of Vias, A. Dasgupta and V. Ramappan, Journal of Electronic Packaging Transactions of the ASME, Vol. 117, pp. 141-146, December 1995.

Software Environment for Reliability Assessment of Advanced Interconnect Technologies, J. Evans, A. Prabhu, and A. Dasgupta, Proceedings of the INTERpack'95, Lahaina, Maui, HI, pp. 317-324, March 26-30, 1995.

Software as a Method of Technology Transfer, M. Osterman, D. Morton, P. Jackson, M. Rosman, and D. Hoffman, Proceedings of the University Government Industry Microelectronics Symposium, Austin, TX, pp. 6-11, May 16-17, 1995.

The State/Industry/University Cooperative Research Center Experience, C. Rust and M. Ojalvo, Technology Transfer Society Proceedings, pp. 48-53, July 16-19, 1995.

Success Factors in the Japanese, Malaysian and Taiwanese Electronic Industry, M. Pecht, CicuiTree, March 1995.

Temperature as a Reliability Factor, M. Pecht, P. Lall, and E. Hakim, Eurotherm Seminar No. 45 : Thermal Management of Electronic Systems , pp. 36.1-36.22, 1995.

Test-Time Compression for Qualification Testing of Electronic Systems: A Case Study, J. Hu, A. Dasgupta, and T. Rothman, Proceedings of the Annual Reliability & Maintainability Symposium, pp. 246-252, January 1995.

A Thermo-Mechanical Fatigue Analysis of High Density Interconnect Vias, A. Prabhu, D. Barker, M. Pecht, J. Evans, W. Grieg, E. Bernard, and E. Smith, Proceedings of the INTERpack'95, Lahaina, Maui, HI, pp. 187-216, March 26-30, 1995.

To Cut or Not to Cut: A Thermomechanical Stress Analysis of Polyimide Thin-Film on Ceramic Structures, M. Pecht, X. Wu, K. Paik, and S. Bhandarkar, IEEE Transactions on Components, Packaging and Manufacturing Technology - Part B, Vol. 18, No. 1, pp. 150-153, February 1995.

Tradeoff Analysis and Partitioning in Multiple Board/MCM Systems, P. Sandborn and A. Parikh, Proceedings of the International Conference and Exposition on Multichip Modules, pp. 401-406, April 1995.

Transferring Electronic Packaging Research Results, M. Ojalvo and C. Rust, Research Transformed into Practice, edited by J. Colville and M. Amde, ASCE Press, New York, pp. 1-13, 1995.

The Transition from Statistical-Field Failure Based Models to Physics-of-Failure Based Models for Reliability Assessment of Electronic Packages, T. Stadterman, M. Cushing, B. Hum, A. Malhotra, and M. Pecht, Proceedings of the INTERpack'95, Lahaina, Maui, HI, pp. 619- 625, March 26-30, 1995.

Tutorial - Electrical Overstress and Electrostatic Discharge, C. Diaz, S. Kang, and C. Duvvery, Modeling of Electrical Overstress in Integrated Circuits, 1995.

Understanding and Solving the Real Reliability Assurance Problems, M. Pecht, F. Nash, and J. Lory, Proceedings of the Annual Reliability & Maintainability Symposium, pp. 159-161, January 1995.

Published in 1994

Back to the Top

---

A PoF Approach to Addressing Defect-related Reliability, R. Bauernschub and P. Lall, IEEE/CPMT International Electronics Manufacturing Technology Symposium, pp. 38-49, 1994.

Analyzing Multichip Module Testing Strategies, M. Abadir, A. Parikh, P. Sandborn, K. Drake, and L. Bal, IEEE Design & Test of Computers, Vol. 11, No. 1, pp. 40-52, Spring 1994.

Assessing Time-to-Failure Due to Conductive Filament Formation in Multi-Layer Organic Laminates, B. Rudra, M. Pecht, and D. Jennings, IEEE Transactions on Components, Packaging and Manufacturing Techniques - Part B, Vol. 17, No. 3, pp. 269-276, August 1994.

Characterization of Polyimides Used in GE-HDI Density Interconnects, M. Pecht and X. Wu, 7th International SAMPE Electronics Conference, pp. 432-445, June 20-23, 1994.

Characterization of Polyimides Used in High Density Interconnects, M. Pecht and X. Wu, IEEE Transactions on Components, Packaging, and Manufacturing Technology - Part B, Vol. 17, No. 4, pp. 632-639, December 1994.

A Framework for Reliability Modeling of Electronics, E. Hakin, M. Osterman and C. Rust, Proceedings of the Digital Technology for the Tactical Communicator., Tactical Communications Conference, Vol. 1, pp. 317-324, May 10-12, 1994.

Computational Methods to Address Reliability of Electronic Packaging, Computational Mechanics for Electronic Devices/Components, M. Pecht, A. Dasgupta, A. Ogunjimi, and J. Evans, Proceedings of the International Symposium on Highly Advanced Computing, Chiba, Japan, pp. 145-176, August 4-5, 1994.

Conceptual Design of Multichip Modules and Systems, P. Sandborn and H. Moreno, Kluwer Academic Publishers, 1994.

C-SAM Sounds the Warning for IC Packaging Defects, P. Yalamanchili, A. Christou, and S. Martel, IEEE Circuits & Devices,pp. 36-41, July 1994.

The Demise of Plastic Encapsulated Microcircuit Myths, E. Hakim, R. Agarwal, and M. Pecht, 5th European Symposium on Reliability of Electron Devices, Failure Physics and Analysis, Glasgow, Scotland, Oct. 6, 1994; also Proceedings of NATO Advisory Group for Aerospace Research and Development, Avionic Panel on Advanced Packaging Concepts for Digital Avionics,San Diego, CA, June 8, 1994.

Development of an Alternative Wire Bond Test Technique, P. Lall, M. Pecht, and D. Barker, Proceedings of the 1994 Institute of Environmental Sciences Annual Technical Meeting , Vol. 2, pp. 22-27, May 1994; also 13th IEEE International Electronics Manufacturing Technology Symposium, pp. 283-287, 1994.

Development of an Alternative Wire Bond Test Technique, P. Lall, M. Pecht, and D. Barker, IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part A, Vol. 17, No. 4, pp. 610-615, December 1994.

Development of an Automated Contact Resistance Probe, M. Ranganthan and M. Pecht, 27th Annual Connector and interconnection Symposium and Trade Show, IICIT, Inc., Boston, MA. Vol. 1D, pp. 369-375, September 19-24, 1994.

Effect of Temperature and Humidity Cycling on FR-4, Bismaleide Triazine and Cyanate Ester Printed Wiring Boards, M. Li, K. Gohari, and M. Pecht, 7th International SAMPE Electronics Conference - Critical Materials Processing in a Changing World, pp. 446-457, June 20-23, 1994.

Effective Thermomechanical Behaviour of Plain-Weave Fabric - Reinforced Composites Using Homogenization Theory,A. Dasgupta and S. Bhandarkar, Journal of Engineering Materials and Technology, Vol. 116, pp. 99-105, Jan. 1994.

Electronic Materials, M. Pecht and A. Prabhu, Encyclopedia of Chemical Technology, 4th edition, edited by J. Kroschwitz, John Wiley Publishing Co., New York, NY, pp. 1024-1048, 1994.

Electronic Module Technology, P. Sandborn and D. Herrell, Physical Architecture and Packaging of Microelectronic Systems, R. Hannemann, A. Kraus and M. Pecht editors, John Wiley & Sons, Inc, New York, NY, pp. 189-249, 1994.

Enhancing the Competitiveness of U.S. Electronic Packaging Industries, DoE NASA, the U.S. Trade Representative, the Office of Management and Budget, the Council of Economic Advisors, Office of S/T Policy, the Security Council, and National Economic Council, 1994.

Failure Mechanism Models for Electromigration, D. Young and A Christou, IEEE Transactions on Reliability, Vol. 43, No. 2, June 1994.

Failure Mechanism Models for Material Aging Due to Inter-Diffusion, J. Li and A. Dasgupta, IEEE Transactions on Reliability, Vol. 43, No. 1, March 1994.

A Fractional-Factorial Numerical Technique for Stress Analysis of Glass-To-Metal Lead Seals, B. Mathieu and A. Dasgupta, ASME Journal of Electronic Packaging, Vol. 116, pp. 98-104, June 1994.

High Level Test Economics Advisor (Hi-TEA), M. Abadir, A. Parikh, L. Bal, C. Murphy, and P. Sandborn, Journal of Electronic Testing (JETTA), Vol. 5, No. 2/3, pp. 195-206, May/August 1994.

Introducing a Theory for the General Solution of Steiner's Problem in Manhattan Space, W. Wong and M. Pecht, Proceedings of the First International Symposium on Microelectronic Package and PCB Technology, Beijing, China, pp. 114-115, September 19-23, 1994.

Investigation of Thermomechanical Properties of Low Temperature Cofired Ceramic, J. Hu, D. Barker, R. Ghoshtagore and M. Pecht, Transaction of the ASME, Vol. 116, pp. 148-153, June 1994.

JTEC Panel Report on Electronic Manufacturing and Packaging in Japan, M. Pecht, 6th International Electronics Manufacturing Technology Symposium, La Jolla, CA, pp. 96-102, September 12-14, 1994.

Liquid Flow-Through Cooling of Electronic Modules, S. Sridhar, M. Osterman, J. Carbonell and K. Herold, AGARD Conference Proceedings 562 for the Avionics Panel Symposium, San Diego, CA, Vol. 17, No. 1-6, October 1994.

Management of Design Activities in a Concurrent Engineering Environment, B. Pourbabai and M. Pecht, International Journal of Production Research, Vol. 32, No. 4, pp. 821-832, 1994.

Modeling PTH Damage Caused by Insertion Mount Connectors, G. Ganguly and A. Dasgupta, Presented at 1994 International Mechanical Engineering Congress and Exhibition of the Winter Annual Meeting, November 6-11, 1994.

Modeling Solder Joint Fatigue Life for Gullwing Leaded Packages: Part I - Elastic Plastic Stress Model, V. Gupta, and D. Barker, Presented at 1994 International Mechanical Engineering Congress and Exhibition of the Winter Annual Meeting, November 6-11, 1994.

Multichip Systems Tradeoff Analysis Tool, P. A. Sandborn, R. Ghosh, K. Drake, M. Abadir, L. Bal, and A. Parikh, Journal of Electronic Testing (JETTA), Vol. 5, nos. 2/3, pp. 207-218, May/August 1994.

Natural Convection Heat Transfer from an Array of Rectangular Protrusions in an Enclosure Filled with Dielectric Liquid, Y. Joshi, M. Kelleger, M. Powell, and E. Torres, Transactions of the ASME, Vol. 116, June 1994.

A Physics-of-Failure Approach to Addressing Defect Related Reliability, R. Bauernschub, P. Lall and M. Pecht, 6th International Electronics Manufacturing Technology Symposium, La Jolla, CA, pp. 38-49, September 12-14, 1994.

A Physics-of-Failure Approach to Addressing Device Reliability in Accelerated Tests, P. Lall and M. Pecht, 5th European Symposium on Reliability of Electron Devices Failure Physics and Analysis, 1994.

A Physics-of-Failure Approach to Addressing Device Reliability in Accelerated Testing of MCMs, J. Evans, M. Cushing, P. Lall, and R. Bauernschub, MCM Conference, Santa Cruz, 1994.

Physics-of-Failure Approach to Design and Reliability Assessment of Microelectronic Packages, M. Pecht, Proceedings of the First International Symposium on Microelectronic Package and PCB Technology, Beijing, China, pp. 175-180, September 19-23, 1994.

Predicting the Reliability of Electronic Equipment, M. Pecht and F. Nash, Proceedings of the IEEE, Vol. 82, (7), pp. 992-1004, July 1994.

Probing Connector Reliability, S. Bhagath and M. Pecht, Connector Specifier, pp. 32-34, June 1994.

Simulation of the Influence of Manufacturing Quality on Reliability of Vias, V. Ramappan and A. Dasgupta, ASME - Congress and Exhibition of the Winter Annual Meeting, November 6-11, 1994.

Stress Analysis of Surface Mount interconnections due to Vibrational loading, K. Darbha, S. Ling and A. Dasgupta, Journal of Electronic Packaging, Vol. 119, p. 183, September 1994.

Technology Application Tradeoff Studies in Multichip Systems, P. A. Sandborn, H. Hashemi, L. Bal, and M. Abadir, IEEE Trans. on Components, Packaging, and Manufacturing Technology, Part B: Advanced Packaging, Vol. 17, No. 2, pp. 161-169, May 1994.

Temperature Dependencies on Electromigration, Chapter 3, M. Pecht and P. Lall, pp. 79-104, Electromigration and Electronic Device Degradation, edited by A. Christou, John Wiley & Sons, Interscience Division, New York, NY, 1994.

The Tradeoff Between Peripheral and Area Array Bonding of Components in Multichip Modules, P. A. Sandborn, M. Abadir, and C. Murphy, IEEE Trans. on Components, Packaging, and Manufacturing, Vol. 17, No. 2, pp. 249-256, June 1994.

Tutorial: How Radiation Affects Polymeric Materials, M. Al-Sheik and A. Christou, IEEE Transactions on Reliability, Vol. 43, No. 4, December 1994.

Isochromatic fringe sharpening and multiplication, B. Han and L. Wang, Experimental Techniques, 11-13, November-December, 1994.

Tutorial: Failure-Mechanism Models for Conductive-Filament Formation, B. Rudra and D. Jennings, IEEE Transactions on Reliability, Vol. 43, No. 3, September, 1994.

Using Plastic-Encapsulated Microcircuits in High Reliability Applications, L. Condra, G. Kromholtz, M. Pecht and E. Hakim, Proceedings 1994 Annual Reliability and Maintainability Symposium, pp. 481-493, Jan. 1994.

 

Published in 1993

Back to the Top

---

Interferometric methods with enhanced sensitivity by optical/digital fringe multiplication, Bongtae Han, Applied Optics, Vol 32, No 25, 4713-4718, 1 September, 1993.

Microwave Performance of GaAs-on-Si MESFET's with Si Buffer Layers, A. Georgakilas, G. Halkias, A. Christou, C. Papavassiliou, G. Perantinos, G. Kontantinidis, and P. Panayotatos, IEEE Transaction on ELectron Devices, Vol. 40, No. 3, March, 1993.

Advances in the Design and Assessment of Reliable Electronics Using Concurrent Engineering, M. Pecht, Proceedings 47th Mechanical Failure Prevention Group, pp. 51-55, 1993.

Influence of Surface Mount Lead Geometry on Fatigue Life, V. Gupta and D. Barker, ASME Journal of Electronic Packaging, Vol. 116, pp. 157-160, June 1994; also ASME Winter Annual Meeting, Paper No. 93-WA/EEP-5, December 1993.

An Approach to the Development of Package Design Guidelines, M. Pecht, D. Barker and A. Dasgupta, ISHM, pp. 217-240, 1993; ISHM, pp. 28 - 54, November/December 1993.

Comparing MCM Technologies, P. Sandborn, Advanced Packaging, Vol. 2, No. 1, pp. 40-43, Winter 1993.

Comparison of Electronics-Reliability Assessment Approaches, M. Cushing, D. Mortin, T. Stadterman and A. Malhotra, IEEE Transactions on Reliability, Vol. 42(4), pp. 600-607, December 1993.

Component Rearrangement on Printed Wiring Boards to Maximize the Fundamental Natural Frequency, T. Chang and E. Magrab, Transaction of the ASME. 312/Vol.115, September 1993.

A Comprehensive Optimization of InAlAs Molecular Beam Epitaxy for InGaAs/InAIAs HEMT Technology, A. Georgakilas, G. Halkias, A. Christou, N. Kornilios, C. Papavassiliou, K. Zekentes, G. Konstantinidis, F. Peiro, A. Cornet, S. Ababou, A. Tabata and G. Guillot, Journal of the Electrochemical Soc., Vol. 140, No. 5, pp. 1504-1509, May 1993.

Computer Aided Conceptual Design of Multichip Systems, P. Sandborn, Proceedings of the IEEE Custom Integrated Circuits Conf. (CICC), pp. 29.4.1-29.4.4, San Diego, CA, May 1993.

Compute Aided Design and Reliability Assessment of Microelectronic Packages, P. Lall, X. Shan, C. Rust, and E. Hakim, Software Applications in Electrical Engineering, United Kingdom, pp. 63-70, July 6-8, 1993.

Computer-Aided Reliability Simulation, Design and Assessment of MCMs: A Physics of Failure Approach, P. Lall, M. Pecht, and E. Hakim, 1993 Advanced Microelectronics Technology Qualification, Reliability, and Logistics Workshop, Denver, CO, August 24-26, 1993.

Derating Guidelines for Temperature-Tolerant Design of Microelectronics, P. Lall, M. Pecht and E. Hakim, 6th International Conference Quality in Electronic Components Failure Prevention, Detection and Analysis; 4th European Symposium on Reliability of Electron Devices, Failure Physics and Analysis, Bordeaux, France, October 4-7, 1993.

Design Approach To Reliable Microelectronic Packages, M. Pecht, M. Cushing and E. Hakim, Proceedings 9th European Hybrid Microelectronics Conference, pp. 484-492, Nice, France, June 2- 4, 1993.

Design of MCMs for Insertion into Standard Surface Mount Packages, P. A. Sandborn, H. Hashemi, and L. Bal, Proceedings of the National Electronic Packaging and Production Conference (NEPCON-West), Anaheim, CA, pp. 651-660, February 1993.

A Design Model for Through-Hole Components Based on Lead-Fatigue Considerations, S. Ling, and A. Dasgupta, Advances in Electronic Packaging ASME EEP, Vol. 4 No. 2, 1993.

Design for Qualification, M. Pecht, Proceedings 1993 Annual Reliability and Maintainability Symposium, pp. 1-4, 1993.

Design of Reliable Die Attach, J. Hu, M. Pecht and A. Dasgupta, International J. Microcircuits and Electronic Packaging, Vol. 16(1), pp. 1-21, 1993.

Dynamic Investigation of Thermal and Sorptive Effects on Electronic Packages, J. Li and M. Pecht, Proceedings of the ASME International Electronics Packaging Conference, September 1993.

Environmental Scanning Electron Microscopic Investigation on Interfacial Defects in Electronic Packages, J. Li and M. Pecht, International Symposium on Nondestructive Characterization of Materials, Oahu, Hawaii, pp. 225-229, June 1993.

Evaluating Terminal Pair System Reliability, M. Pecht, J. She and D. Barbe, IEICE Trans. on Fundamentals of Electronics, Communications and Computer Sciences, pp. 555-546, April 1993.

Experimental and Analytical Investigation of PTH Fatigue Life in Aramid PWBs Part II, D. Yoder, S. Bhandarkar and A. Dasgupta, IPC Review (part 2), June 1993.

Experimental and Theoretical Investigation of Die Attach manufacturing Variables and Thermo-Mechanical Performance of GaAs MMICs on LTCC Substrates, A. Christou and D. Barker, 1993 U.S. Conference on GaAs Manufacturing TECHnology,Atlanta, GA, May 1993.

Failure Mechanism Models for Creep and Creep Rupture, J. Li, and A. Dasgupta, Transactions of the ASME, Vol. 115, pp. 416-423, December 1993.

Failure Mechanism Models For Cyclic Fatigue, A. Dasgupta, IEEE Trans. on Rel., Vol. 42, No. 4, pp. 548-555, December, 1993.

The Future of Military Standards - A Focus on Electronics, M. Pecht and E. Hakim, IEEE Aerospace and Electronic Systems, Vol. 17 (7), pp. 16-19, 1993.

A Generalized Stress Analysis Model for Fatigue Prediction of Surface Mount Solder Joints, A. Dasgupta, S. Ling and S. Verma, Advances in Electronic Packaging ASME EEP-Vol. 4-2, 1993.

An Integrated Physics-of-Failure Approach to Reliability Assessment, P. Lall and M. Pecht, Advances in Electronic Packaging ASME EEP-Vol.4-1, 1993; also ASME International Electronic Packaging Conference, Binghamton, NY, September 29-October 2, 1993.

Influence of Nonlinear Interphase/Matrix Properties on Effective Properties of Unidirectional Fiber Composites, A. Dasgupta and S. Bhandarkar, First Joint ASCE/ASME/SES Meeting, Charlottesville, VA, June 6-9, 1993.

Influence of Surface Mount Lead End Geometry on Fatigue Life, V. Gupta and D. Barker, ASME Winter Annual Meeting paper number 93-WA/EEP-5, New Orleans, LA, November. 28 - December 3, 1993.

Local PWB and Component Bowing of an Assembly Subjected to a Bending Moment, D. Barker and Sidharth, ASME Winter Annual Meeting paper number 93-WA/EEP-4, New Orleans, LA, November 28 - December 3, 1993.

Mechanical Design Failure Models for Buckling, A. Dasgupta and H. Haslach, IEEE Transactions on Reliability, Vol. 42, No. 1, pp. 9-16, March 1993.

Microelectronic Packaging Technology Transfer, J. Key, University/Government/Industry Microelectronics Symposium, Research Triangle Park, NC, pp. 10-16, May 18-19, 1993.

Microwave Performance of GaAs on Silicon MESFETs with Si Buffer Layer, A. Georgakilas, A. Christou and G. Halkias, IEEE Trans. on Electron Devices, Vol. 40, No. 3, pp. 507-512, March 1993.

Modeling the Effects of Mixed Flowing Gas Corrosion and Stress Relaxation on Contact Interface Resistance, S. Bhagath and M. Pecht, ASME Journal of Electronic Packaging, Vol. 115, pp. 404-409, Dec. 1993.

Module Level Performance Simulator for the Figure of Merit of Electrical and Optical Interconnects, L. Guan, C. Pusarla, G. Halkias, A. Christou, NASCODE X, Ninth International Conference on Numerical Analysis, Copper Mountain, Co, April 6-9, 1993.

Multi-Chip Modules: An Overview, P. Lall and S. Bhagath, Solid State Technology, Vol. 36(8), September 1993.

A Numerical Study of Fatigue Life of J-Leaded Solder Joints Using the Energy Partitioning Approach, S. Verma, A. Dasgupta, and D. Barker, Transactions of the ASME, Vol. 115, pp. 416-423, December 1993.

An Overview of Multichip Modules, P. Lall and S. Bhagath, Solid State Technology, September 1993.

A Partitioning Advisor for Studying the Tradeoff Between Peripheral and Area Array Bonding of Components in Multichip Modules, P. Sandborn, M. Abadir and C. Murphy, Proceedings of the International Electronics Manufacturing Technology Symposium (IEMT), pp. 271-276, Santa Clara, CA, October 1993.

Physics of Failure Based Computer Tools for Design of Microelectronic Packages, P. Lall and E. Hakim, 2nd ESA Electronic Components Conference, Noordwijk, The Netherlands, May 24-28, 1993.

Physics of Failure Based Computer Tools For Design of Microelectronic Packages, P. Lall and M. Pecht, 3rd International Microelectronics and Systems 93' Conference, Kuala Lumpur, Malaysia, August 10-13, 1993.

Plastic Packaged Microcircuits: Quality, Reliability, and Cost Issues, M. Pecht, R. Agarwal and D. Quearry, IEEE Transactions on Reliability, Vol. 42(4), pp. 630-635, December 1993.

Prediction of Electrical Properties of Plain-Weave Fabric Composites for Printed Wiring Board Design, R. Agarwal and A. Dasgupta, Journal of Electronic Packaging, Vol. 115, No. 2, pp. 219-224 (Also ASME Winter 1993 Meeting, paper number 92-WA/EEP-24), June 1993.

Reliability Evaluation of Plastic Encapsulated Parts, L. Weil, M. Pecht and E. Hakim, IEEE Transactions on Reliability, Vol. 42(4), pp. 608-616, December 1993.

Reliability Evaluation of Simple Logic Microcircuits in Surface Mount Plastic Packages, L. Condra, G. Wenzel and M. Pecht, EEP-Vol. 6, Electronic Packaging Reliability, pp. 85-100, Nov. 1993.

Resistors, Chapter 2, M. Pecht, P. Lall, The Electrical Engineering Handbook, edited by Richard Dorf, CRC Press Inc., Boca Raton, FL, 1993.

Role of Failure Mechanism Identification in Accelerated Testing, J. Hu, D. Barker and A. Dasgupta and A. Arora, Journal of the IES, July/August 1993.

Solder Joint Crack Initiation and Crack Propagation in a TSOP Using Strain Energy Partitioning, D. Barker, V. Gupta and K. Cluff, Proceedings of ASME International Electronic Packaging Conference, Binghamton, NY, pp. 943-950, September 19 - October 2, 1993.

Stress Analysis of Glass-to-Metal Lead Seals, B. Mathieu and A. Dasgupta, Presented at the ASME Winter Annual Meeting New Orleans, LA, November 28 - December 3, 1993.

Surface Related Failure Mechanisms in Polyimide Passivated L-Band MMICs, G. Halkias, A. Christou, K. Huang and J. Li, IEEE - IRPS, March 1993.

Thermal Derating Guidelines for Temperature - Tolerant Design of Microelectronic Devices, P. Lall, M. Pecht and E. Hakim, ESREF (Bordaux France), 1993.

Thermal Stress Issues in Plated-Through-Hole Reliability, Chapter 20, D. Barker and A. Dasgupta; Mechanics of Wirebond Interconnects, Chapter 22, M. Pecht and P. Lall; Corrosion in Microelectronic Packages, Chapter 23, X. Shan and M. Pecht; Thermal Stress and Strain in Microelectronics Packaging, edited by John Lau, Van Nostrand Reinhold, New York, NY, 1993.

Tradeoff Analysis for a 300 MHz Module, P. A. Sandborn, Presented at the Workshop on Interconnections within High-Speed Digital Systems, Santa Fe, NM, May 1993.

Training the Shop Floor Worker: University Perspectives, A. Dasgupta, Surface Mount International Conference, San Jose, CA, August 29 - September 2, 1993.

Using Plastic Encapsulated Microcircuits in High Reliability Applications, L. Condra, G. Kromholtz, M. Pecht, and E. Hakim, 1993.

Vibrational Fatigue Life Calculations for Components Mounted on PWBs, D. Barker, Y. Chen and A. Dasgupta, Journal of Electronic Packaging, Vol. 115, No. 2, pp. 195-200 (Also ASME Winter 1993 Meeting, paper number 92-WA/EEP-18),June 1993.

Estimating the Vibration fatigue Life of Quad Leaded Surface Mount Components, D. Barker, Y. Chen, and A. Dasgupta, Journal of Electronic Packaging , Vol. 115, June 1993.

Published in 1992

Back to the Top

---

Alloy Clustering and Defect Structure in the Molecular Beam Epitaxy of In0.53Ga0.47As on Silicon, A. Georgakilas, A. Christou, A. Dimoulas and J. Stoemenos, J. Mater. Res., Vol. 7(8), pp. 2194 - 2204, August 1992.

Higher sensitivity moire interferometry for micromechanics studies, Bongtae Han, Optical Engineering, Vol 31, No 7, 1517-1526, July 1992.

Anisotropic Spinodal Decomposition in MBE InGaAs Films Grown on Misoriented <001> Si Substrates, A. Georgakilas, J. Stoemenos and A. Christou, 1992 GaAs and Related Compounds Sym. Proceedings, Karuizawa, Japan, September 28-October 1, 1992.

The Close Attached Capacitor: a Solution to Switching Noise Problems, S. H. Hashemi, P. A. Sandborn, D. Disko, and R. Evans, IEEE Trans. on Components, Hybrids, and Manufacturing Technology, Vol. 15, No. 6, pp. 1056-1063, December 1992.

Are Components Still the Major Problem: A Review of Electronic System and Device Field Failure Returns, M. Pecht and V. Ramappan, IEEE Trans. CHMT, 15(6), 1160-1164, 1992.

Immersion interferometer for microscopic moire interferometry, B. Han and D. Post, Experimental Mechanics, 38-41, March, 1992.

Comparison of Plastic and Hermetic Microcircuits Under Temperature Cycling and Temperature-Humidity-Bias, L. Condra, S. O'Rear, T. Freedman, L. Flancia, M. Pecht and D. Barker, IEEE Trans. CHMT, Vol. 15(5), pp. 640-650, 1992.

Composite Materials in Electronic Packaging, A. Dasgupta, 6th international Sampe Electronic Material and Process Conference, Baltimore, MD, June, 1992.

A Computer Integrated Product Development Environment, G. Bonadies and M. Pecht, Proceedings CE and CALS Washington '92 Conference and Exposition, pp. 151-164, June 1-4, 1992.

Conductive Filament Formation in Printed Wiring Boards, M. Pecht, B. Wu and D. Jennings, 13th IEEE Intern. Electronics Manuf. Techn. Symposium, pp. 74-79, 1992.

Cooling of Electronic Boards Using Internal Fluid Flows, K. Herold, S. Sridhar and S. Hu, Proceedings 1992 Joint ASME/JSME Conference on Electronic Packaging: Advances in Electronic Packaging 1992, pp. 285-290, April 9-12, 1992.

Correlation Between Mechanical Strength and Processing Parameters of GaAs Wafers, J.M. Hu and A. Christou, 1992 Conference on GaAs Manufacturing Techniques, April 22-25, 1992.

Corrosion Modeling in Micorelectronic Packaging, A. Christou, X. Shan, and M. Pecht, International Journal of Microcircuits and Electronic Packaging, Vol. 15, No. 1, First Quarter 1992.

Design Approach of Reliable MCM Packages Based on Physics-of- failure Models, J. Hu and D. Barker, Proceedings 1992 ICMCM, pp. 386-393, April 1-3, 1992.

Design Guidelines for Leads of Microelectronic Packages, A. Arora, M. Pecht, and A. Dasgupta, Proceedings 1992 Surface Mount Technology and Modern Circuit Making Conference, pp. 89-100, April 13-16, 1992.

Design of Reliable Electronic Packages Bases on Physics of Failure, Proceedings of NASA JSC Conference on Surface Mount Technology, Houston, TX, July 28-29, 1992.

Design of Reliable Electronic Packages Based on a Physics-of- Failure Approach, J. Hu and D. Barker, Proceedings 1992 Surface Mount Technology and Modern Circuit Making Conference, pp. 161-171, April 13-16, 1992.

Design of Software Tools for Use in a Concurrent Engineering Environment, M. Osterman, Proceedings CE and CALS Washington '92 Conference and Exposition, pp. 165-173, June 1-4, 1992.

Development of An Alternative Wire Bond Test Technique, M. Pecht, P. Lall and D. Barker, 13th IEEE Intern. Electronics Manuf. Techn. Symposium , pp. 283-287, 1992.

Dual Functional Distribution of Failure in GaAs Multichip Microwave Monolithic Integrated Circuits (MMICs), A. Christou, P. Tang and J. Hu, IEEE Trans. on Electron Devices, Vol. 39(10), October 1992.

Education in Reliable Electronic Packaging, M. Pecht and D. Weiss, Proceedings 1992 Annual Reliability and Maintainability Symposium, pp. 144-149, January 1992.

Effect of Humidity Cycling on Reliability of Overlaid High-density Interconnects, X. Shan, R. Agarwal, M. Pecht and J. Evans, Proceedings IEEE Multichip Module Conference, pp. 106-109, March 18-20, 1992.

Effect of SMC Lead Dimensional Variabilities on Lead Compliance and Solder Joint Fatigue Life, D. Barker, I. Sharif, A. Dasgupta and M. Pecht, Journal of Electronic Packaging, Transactions of the ASME, Vol. 144, pp. 177-184, June 1992.

Electronic Packaging Education for Mechanical Engineers: A Panel Response, J. Dally, T. Kawakami, W. Nakayama, K. Torrance, and A. Kraus, Advances in Electronic Packaging, ASME 1992.

Evaluation of Manufacturing Variables in the Reliability of Surface Mount Capacitors, L. Condra, G. Johnson, M. Pecht and A. Christou, IEEE Trans. CHMT, Vol. 15(4), pp. 542-552, 1992.

Failure Mechanism Model for Brittle Fracture, A. Dasgupta, and J. Hu, IEEE Trans. on Reliability, Vol. 41 (3), September 1992.

Failure Mechanism Model for Ductile Fracture, A. Dasgupta, and J. Hu, IEEE Trans. on Reliability, Vol. 41(4), November 1992.

Failure Mechanism Models for Excessive Elastic Deformation, A. Dasgupta and J. Hu, IEEE Transactions on Reliability, Vol. 41 (1), pp. 37-47, March 1992.

Failure Mechanism Models for Plastic Deformation, A. Dasgupta, and J. Hu, IEEE Trans. on Reliability, Vol. 41(2), 1992.

Fatigue Life of Misregistered J-lead Solder Joints Through an Energy-partitioning Analysis, A. Dasgupta, S. Verma and D. Barker, ASME Winter Annual Meeting, Anaheim, CA, Nov. 8-13, 1992.

Finite Element Modeling of the Influence of Intermetallics on Solder Joint Reliability, S. Verma and A. Dasgupta, 21st Joint Hybrid Microelectronics Symposium, ISHM, Cherry Hill, NJ, pp. 11, May 27-28, 1992.

A Generalized Self-Consistent Mori-Tanaka Scheme for Fiber Composites with Multiple Interphases, A. Dasgupta and S. Bhandarkar, Mechanics of Materials, Vol. 14, pp. 67-82, 1992.

HBT Self-Aligned Collector-Base Interface State Related Failure Mechanism, A. Christou and A. Georgakilas, 1992 GaAs and Related Compounds Sym. Proce., Karuizawa, Japan, pp. 711-716, September 28 - October 1, 1992.

Heterojunction Bipolar Transistor Surface Related Failure Mechanisms, A. Christou, P. Tang, A. Georgakilas, L. Zhu and B. Marazas, ESREF 92 Proceedings, Schwabish Gmund, Germany, Oct. 5-8, 1992.

High Electron Mobility Transistors with Optically Processed Silicide Metallizations; Thermal and Microwave Analysis, P. Tang, M. Fan, A. Iliadis and A. Christou, Proceedings Materials Research Society Symposium 1991, Boston, MA, pp. 139-144, December 3-5, 1992.

Influence of Selected Design Variables on Thermo-Mechanical Stress Distributions in Plated-Through-Hole Structures, S. Bhandarkar, A. Dasgupta, D. Barker, M. Pecht and W. Engelmaier, Journal of Electronic Packaging, Vol. 114 (1), pp. 8-13, March 1992.

InGaAs Molecular Beam Epitaxy in InP Wells Prepared by Reactive Ion Etching, A. Georgakilas, K. Zekentes, K. Tsagaraki, P. Lefebvre, J. Allegre and A. Christou, 4th International Conference on InP and Related Materials, Newport, RI, April 21-24 1992, pp. 101-104, April 21-24, 1992.

Manufacturing Defects and Failures in Flexible Printed Circuits, D. Wolfowitz and D. Barker, Proceedings 1992 Surface Mount Technology and Modern Circuit Making Conference, April 13-16, 1992, pp. 101-120, 1992.

Micromechanical Simulation of Thermomechanical and Thermal Properties of Woven-Fabric Composites, S.M. Bhandarkar, R. Agarwal and A. Dasgupta, Proceedings Third International Conference CADCOMP 92, Newark, Delaware, pp. 547-558 May 13-15, 1992.

Modeling the Vibrational Restraint of Wedge Lock Card Guides, D. Barker, Y. Chen, ASME Winter Annual Meeting, paper number 92-WA/EEP-16, Anaheim, CA, November 9-13, 1992.

Natural Convection Liquid Cooling of a Substrate-Mounted Protrusion in a Square Enclosure: A Parametric Study, S. Sathe and Y. Joshi, Journal of Heat Transfer, Vol. 114, May 1992.

Optical Properties of InGaAs Films Embedded in Plasma Etched InP Wells, A. Georgakilas, A. Christou, P. Lefebvre, J. Allegre, K. Zekentes and G. Halkias, Appl. Phys. Lett. Vol. 61 (7), pp. 798-800, August 1992.

Orthotropic Electrical Permittivity and Thermal Conductivity of Woven-Fabric Composites, R. Agarwal, American Society for Composites 7th Tech. Conf. on Composite Materials, University Park, PA, pp. 519-528, October 13-15, 1992.

Orthotropic Thermal Conductivity of Plain-weave Fabric Composites Using a Homogenization Technique, A. Dasgupta and R. Agarwal, Journal of Composite Materials, Vol. 26 (18), pp. 2736-2758, 1992.

A Physics-of-Failure Approach to Component Placement, M. Osterman, Journal of Electronic Packaging, Vol. 114, September 1992.

A Physics-of-Failure Approach to IC Burn-In, M. Pecht and P. Lall, Proceedings 1992 Joint ASME/JSME Conference on Electronic Packaging: Advances in Electronic Packaging 1992, April 9-12, 1992, pp. 917-924; also presented at 21st Joint Hybrid Microelectronics Symposium, ISHM, Cherry Hill, NJ, May 27-28, 1992.

Placement Design for Producibility, M. Pecht, J. Watts and S. Balakrishnan, Journal of Electronics Manufacturing, Vol. 1 (2), pp. 61-76, 1992.

Potential Failure Mechanism in Overlaid High Density Interconnects, R. Agarwal, M. Pecht, X. Shan, J. Evans, ISHM-IEPS Proceedings 92, Intern. Conf. Multichip Modules, pp. 361-367, 1992.

Prediction of Electrical Properties of Plain-Weave Fabric Reinforced Composites for Printed Circuit Board Design, R. Agarwal and A. Dasgupta, ASME Winter Annual Meeting, Anaheim, CA, November 8-13, 1992.

PWB Solder Joint Life Calculations Under Thermal and Vibrational Loading, D. Barker, A. Dasgupta, M. Pecht, Journal of the IES, Vol. 35 (1), pp. 17-25, February 1992.

Reliability of GaAs Microwave Monolithic Integrated Circuits, A. Christou, Proceedings of ESREF 92, Swchabish Gmund, Germany, October 5-8, 1992.

Reliability of k-out-of-n Warm-Standby System, J. She and M. Pecht, IEEE Transactions on Reliability, Vol. 41 (1), pp. 72-75, March 1992.

Reliability and Yield and Manufacturing Defect Correlation in Microwave and Optoelectronic Circuits, A. Christou and A. Georgakilas, Advances in Electronic Packaging, 1992.

RF Performance of GaAs/Si/Si MESFETs for MIMICs, G. Halkias, A. Georgakilas, C. Papavassiliou, G. Perantinos, M. Lagadas, G. Konstantinidis and A. Christou, GaAs'92, European GaAs Application Symposium, ESTEC, Noordwijk, The Netherlands, April 27-29, 1992.

Role and Measurement of Trimming Shock on Component Leads, D. Wolfovitz, D. Barker, M. Pecht, 13th IEEE Intern. Electronics Manuf. Techn. Symposium, pp. 64-67, 1992.

Role of Failure-mechanism Identification in Accelerated Testing, J. Hu, D. Barker, A. Dasgupta, and A. Arora, Proceedings 1992 Annual Reliability and Maintainability Symposium, pp. 181-188, January 1992.

Solder Creep-Fatigue Analysis by an Energy-Partitioning Approach, A. Dasgupta, C. Oyan, M. Pecht and D. Barker, AMSE Journal of Electronic Packaging, Vol. 144, pp. 152-160, June 1992. Presented all at Mechanics of Surface Mount Assemblies Symposium, ASME/WAM, GA, Dec. 1-6, 1992.

Suppression of the Kink Effect in InGaAs/InAlAs HEMT Grown by MBE by Optimizing the InAlAs Buffer Layer, A. Georgakilas, K. Zekentes, N. Kornilios, G. Halkias, A. Dimoulas, A. Christou, F. Peiro, A. Cornet, T. Benyattou, A. Tabata and G. Guillot, 4th International Conference on InP and Related Materials, Newport, RI, pp. 97-100, April 21-24, 1992.

Technology Application Tradeoff Studies in Multichip Systems, P. Sandborn, Proceedings of the 1st International Conference on MCM's, Denver, CO, pp. 150-159, April 1992.

The Technology and Reliability of Laser Processed Heterojunction Devices, A. Christou, Proceedings of SAMPE 1992, Baltimore, MD, June 22-25, 1992.

Temperature Dependence on Integrated Circuit Failure Mechanisms, Chapter 2, pp. 61-152, M. Pecht, P. Lall and E. Hakim, Advances in Thermal Modeling III, edited by A. Bar-Cohen and A. Kraus, IEEE Press, November, 1992.

Towards a QML Approach in Electronic Packaging, A. Dasgupta, S. Verma and R. Agarwal, 13th IEEE/CHMT International Electronics Manuf. Technology Sym., Baltimore, MD, pp. 19-29, September 28-30, 1992.

Transient Natural Convection from a Leadless Chip Carrier in a Liquid Filled Enclosure: A Numerical Study, D. Wroblewski, and Y. Joshi, Journal of Electronic Packaging, Vol. 114, September 1992.

Transition of MIL-STD-785 from a Military to a Physics-of-failure based Com-military Document, M. Pecht, A. Malhotra, D. Wolfowitz, M. Oren and M. Cushing, 9th Int'l Conf. of the Israel Society for Quality Assurance, Jerusalem, Israel, November 16-19, 1992.

Two-Dimensional Thermal Modeling of Power Monolithic Microwave Integrated Circuits, M. Fan, A. Christou, M. Pecht, IEEE Trans. on Electron Devices, Vol. 39 (5), pp. 1075-1079, May 1992.

The Influence of Temperature on Integrated Circuit Failure Mechanisms, M. Pecht, P. Lall and E. Hakim, Quality and Reliability Engineering Intl, Vol. 8, pp. 167-175, 1992.

Vibrational Fatigue Life Calculations for Components Mounted on PWBs, D. Barker, Y. Chen and A. Dasgupta, ASME Winter Annual Meeting, 92-WA/EEP-18, Anaheim, CA, November 9-13, 1992.

Published in 1991

Back to the Top

---

Commercial Microcircuit Options in Military Avionics Systems Demand Reliability, L. Condra and M. Pecht, Defense Electronics, August, 1991.

CAD for Multichip Packaging: Issues for Today and Needs for the Future, P. A. Sandborn, Proceedings of the SRC Topical Research Conference on IC Packaging Design, Analysis and Simulation, pp. 9-12, May 1991.

CAD Specification for Multichip System Packaging, P. Sandborn, and K. Drake, Proceedings of  the 1991 VLSI and GaAs Packaging Workshop, pp. 43-45, October 1991.

Close Attached Capacitors for MCM Decoupling, H. Hashemi and P. A. Sandborn, presented at the National Electronic Packaging and Production Conference (NEPCON-West), February 1991.

Design and Analysis of Electronic Assemblies Using CALCE Software Version 3.0, E. Hakim, M. Pecht and D. Barker, 1991 Proceedings-Institute of Environmental Science, pp. 36-40, 1991.

Dislocation Mechanics and Shock Deformation, V. Ramachandran, R. Armstrong, D. Barker, C. Coffey, R. Dick, W. Holt, J. McKirgan, W. Mock, Jr., W. Soper, J. Williams, F. Zerilli and X. Zhang, Proceedings of XIII AIRAPT International Conference on High Pressure Science and Technology, Bangalore, India, Oxford and IBH Publishing Co., New Delhi, India, October 7-11, 1991.

Effective Properties of Fiber Composites with Multiple Interphases, A. Dasgupta, S. Bhandarkar, M. Pecht, and D. Barker, Composites, Albany, NY, pp. 1044-1053, October 6-9, 1991.

Experimental Evaluation of Mechanical Behavior of GaAs Wafer Material, J. Ju, M. Pecht, D. Barker and A. Dasgupta, Proceedings of 1991 Spring Meeting of the Material Research Society, 1991.

Failure Distribution Functions for GaAs MMICs, A. Christou and P. Tang, ESREF 91 Proceedings, 5th International Conference Quality in Electronic Components, Bordeaux, France, pp. 327-334, October 7-10, 1991.

GaAs on Silicon Materials and Devices for Microwave Integrated Circuits and Optical Interconnects, A. Christou, Proceedings 1991 International Semiconductor Device Research Symposium, (Invited) Charlottesville, VA, pp. 285-289, December 4-6, 1991.

An Improved Procedure for the Determination of the Elastic Constants of Component-Lead-Board Assemblies, T. Chang and E. Magrab, Journal of Electronic Packaging, Vol. 113, pp. 427-430, December 1991.

The Influence of Temperature on Integrated Circuit Failure Mechanisms; Part II, M. Pecht, P. Lall and E. Hakim, 5th International Conference on Quality in Electronic Components, Bordeaux, France, pp. 85-92, October 7-10, 1991.

Material Failure Mechanisms and Damage Models, A. Dasgupta and M. Pecht, IEEE Transactions on Reliability, Vol. 40 (5), pp. 531-536, December 1991.

Microelectronic Reliability/Temperature Independence, Part I, E. Hakim, M. Pecht and P. Lall, 5th International Conference on Quality in Electronic Components, Bordeaux, France, pp. 49-54, October 7-10, 1991.

Minimizing Life Cycle Costs, M. Pecht, J. She, J. Hu and K. Richter, Concurrent Engineering, pp. 11-24, 1991.

Modeling the Influence of Absolute Temperature on Microelectronic Device Reliability, M. Pecht and P. Lall, Internepcon/Semiconductor Thailand '91, Bangkok, Thailand, December 2-4, 1991.

Modulation Doped Channel Transistors: Performance Reliability and Comparison with a Quasi-charge Control Model, A. Christou, A. Iliadis, and P. Tang, Proceedings 1991 International Semiconductor Device Research Symposium, pp. 659-663, December 1991.

Natural Convection Arising from a Heat Generating Substrate-Mounted Protrusion in a Liquid-Filled Two-Dimensional Enclosure, S. Sathe, and Y. Joshi, International Heat and Mass Transfer, Vol. 34 (8), pp. 2149-2163, 1991.

Natural Convection Cooling of a Ceramic Substrate Mounted Leadless Chip Carrier in Dielectric Liquids, Y. Joshi, and R. Paje, International Heat and Mass Transfer, Vol. 34 (8), pp. 39-47, 1991.

Negative Photoconductivity in Dual-channel InGaAs Pseudomorphic High Electron Mobility Transistors, A. Christou, P. Tang and A. Iliadis, Proceedings 1991 International Semiconductor Device Research Symposium, pp. 313-316, December 1991.

Non-Linear Thermo-Mechanical Properties of Fabric Reinforced Printed Wiring Boards, S. Bhandarker, A. Dasgupta, M. Pecht, and D. Barker, 5th International SAMPE Electronics Conference, June 18-20, 1991

Prediction of PWB/PCB Thermal Conductivity, A. Agarwal, A. Dasgupta, M. Pecht and D. Barker, Inter. Journal Hybrid Microelectronics, Vol. 14 (3), pp. 83-95, 1991.

A Probabilistic Approach for Prediction of Thermal Fatigue Life of Wire Bonding in Microelectronics, J. Hu, M. Pecht and A. Dasgupta, Journal of Electronic Packaging, Vol. 113, pp. 275-285, September 1991.

Reliability of Advanced LAMBE FETs and HEMTs, W. Anderson and A. Christou (Naval Research Laboratory, Washington, DC- University of Maryland, College Park, MD, study), Proceedings of ESREF '91, pp. 323-329, October 1991.

Role of Strain-Partitioning Analysis in Solder Life Prediction, C. Oyan, A. Dasgupta, M. Pecht and D. Barker, Inter. Journal Hybrid Microelectronics, Vol. 14 (2), pp. 37-47, 1991.

A Software Tool for Technology Tradeoff Evaluation in Multichip Packaging, P. Sandborn, Proceedings of the Eleventh International Electronics Manufacturing Technology Symposium (IEMT), San Francisco, CA, pp. 337-341, Sept. 1991.

Temperature Dependence of the Mechanical Properties of GaAs Wafers, J. Hu, M. Pecht, Journal of Electronic Packaging, Vol. 113 (4), pp. 331-336, December 1991.

A Tool for Evaluating Performance and Technology Tradeoffs in Integrated Circuit Packaging, P. Sandborn, Proceedings of NEPCON-East, pp. 569-576, June 1991.

Transient Thermal Stress Analysis of Plated Through Hole Subjected to Wave Soldering, D. Barker, M. Pecht, A. Dasgupta and S. Naqvi, Journal of Electronic Packaging, Vol. 113, pp. 149-155, June 1991.

True Temperature Measurement of Complex Devices Using Infrared Thermography, C. Lamb, G. Braunberg, and M. Pecht, Printed Circuit Design, pp. 20-24, March 1991.

A Viscoelastic Constitutive Model for Constant Rate Loading at Different Relative Humidities, M. Pecht, and H. Haslach, Jr., Mechanics of Materials, Vol. 11., pp. 337-345, 1991.

 

From 1990 and prior

Back to the Top

---

Fuzzy regression analysis for fatigue crack growth, Xin Wu, Jun Ming Hu, and Michael Pecht , Proceedings on Uncertainty Modeling and Analysis, 1990, First International Symposium on, Vol., No., pp 437-440, December 3-5, 1990, DOI:10.1109/ISUMA.1990.151292.

Generative Mechanisms and Preventive Methods for Micro-Defects in PCB, N. Tsujioka, M. Pecht, and D. Jennings, Proceedings of the Printed Circuit World Convention, Heazell Books, B 2, pp. 3-12, Aylesbury, UK, 1990.

How Failure Prediction Methodology affects Electronic Equipment Design, C. Leonard and M. Pecht, Quality & Reliability Engineering International, Vol. 6, pp. 243-249, 1990.

A Corrosion Rate Equation for Microelectronic Die Metallization, M. Pecht and W. Ko, The International Journal for Hybrid Microelectronics, Vol. 13 (2), pp. 41-52, June 1990.

A Design Advisor and Model Building Tool for the Analysis of Switching Noise in Multichip Modules, P. Sandborn and H. Hashemi, Proceedings of the 1990 International Symposium on Microelectronics (ISHM), Chicago, IL, pp. 652-657, October 1990.

Analytical and Simulation Study of Switching Noise in CMOS Circuits, H. Hashemi, U. Ghoshal, K. Ziai, and P. Sandborn, Proceedings of the 1990 International Electronics Packaging Conference (IEPS), Marlborough, MA, pp. 762-773, September 1990.

Design and Analysis for a Reduced Parasitic Power Distribution System, H. Hashemi and P. Sandborn, presented at the Ninth Annual VLSI and GaAs Packaging Workshop, Boston, MA, September 1990.

Effect of Voids in Solder-Filled Plated through Holes, M. Pecht, D. Barker, A. Dasgupta, and S. Bhandarker, IPC 33rd Annual Meeting, April 1-6, 1990.

Fatigue Analysis of a Planarpak Surface Mount Component, I. Sharif, D. Barker, and M. Pecht, American Society of Medical Engineers Winter Annual Meeting, Dallas, TX, November 25-30, 1990.

A Model for Moisture Induced Corrosion Failures in Microelectronic Packages, M. Pecht, IEEE Transactions on Components, Hybrids, and Manufacturing Technology, Vol. 13 (2), pp. 383-389, June 1990.

Operational Temperature Cycle Values for Application Environment Categories, S. Whelan, M. Pecht, and A. Dasgupta International Journal for Hybrid Microelectronics, Vol. 13 (1), pp. 6-11, March 1990.

Automated Design for Maintainability, H. Reinhart and M. Pecht, IEEE CH2881-1/90/0000-1227, pp. 1227-1232, 1990.

Acceleration Sensors for Solid State Electronic Safety and Arming Devices, S. Genberg, M. Pecht, Inter. Journal for Hybrid Microelectronics, Vol. 12 (3), September 1989.

Approximation the Steiner-Tree in the Placement Process, Y. Wong and M. Pecht, Journal of Electronic Packaging, Vol. 111, pp. 228-235, September 1989.

A Failure Prediction Model for Wire Bonds, M. Pecht, A. Dasgupta and P. Lall, Proc. of ISHM '89, Baltimore, MD, pp. 607-613, 1989 Proceedings, October 17-19, October 1989.

A Critique of Mil-Hdbk-217E Reliability Prediction methods, M. Pecht and W. Kang, IEEE Transactions on Reliability, Vol. 37 (5), pp. 453-457, December 1988.

A Coupled Algorithmic-Heuristic Approach for Design Optimization, S. Azarm, and M. Pecht, IEEE Transactions on Systems, Man and Cybernetics, Vol. SMC-17 (2), pp. 289-293, 1987.

An Investigation into PWB Component-Placement Tradeoffs, M. Pecht, M. Paomer, W. Schenke, and R. Porter, IEEE Transactions on Reliability, Vol. R-36 (5) December 1987.

PCB Design for Thermal Reliability, M. Pecht and B. Sawyer, Vol. 4 (5), pp. 12, May 1987.

Placement of Integrated Circuits for Reliability on Conductivity Cooled Printed Wiring Boards, M. Osterman and M. Pecht, ASME Winter Annual Meeting Boston, Massachusetts- December 13-18, 1987.

Status of Compound Semiconductor Device Reliability, W. Anderson and A. Christou, Kluwer Academic Publishers (Printed in Netherlands), pp. 423, 1990.

Switching Noise in ECL Packaging and Interconnect Systems, P. A. Sandborn, H. Hashemi, and K. Ziai, Proceedings of the IEEE 1990 Bipolar Circuits and Technology Meeting (BCTM), Minneapolis, MN, pp. 148-151, September 1990.

Switching Noise in a Medium Film Copper/ Polyimide Multichip Module, P. Sandborn, H. Hashemi, and B. Weigler, Proceedings of the SPIE International Symposium on Advances in Interconnects and Packaging, Boston, MA, pp. 177-186, November 1990.

Temperature Dependence of Micro Electronic Device Failures M. Pecht, P. Lall and S. Whelan (Westinghouse), Quality and Reliability Engineering Intl, Vol. 6, pp. 275-284, 1990.

Placement for Reliability and Routability of Convectively Cooled PWBs, M. Osterman, and M. Pecht, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, Vol. 9, No. 7, pp. 734-744, July 1990.

Placement for Reliability Bases on Physics of Failure Concepts, M. Osterman, and M. Pecht, IEEE National Aerospace and Electronics Conference NAECON, Dayton, Ohio, pp. 1021-1027, May 21-25, 1990.

The Reliability Physics Approach to Failure Prediction Modeling, M. Pecht, A. Dasgupta, D. Barker and C. Leonard, Quality and Reliability Engineering Intl, Vol. 6, pp. 267-273, 1990.

A Zonal Decomposition Methodology for Detailed Temperature Field Evaluation, M. Pecht and C. Tan, Journal of Electronic Packaging, Vol. 112, pp. 260-266, September 1990.

Reliability Prediction of Electronic Packages, A. Dasgupta, D. Barker and M. Pecht, Annual Reliability and Maintainability Symposium, pp. 323-330, 1990.

Solder Joint Fatigue - A Total Strain versus Life Approach, J. Vodzak, D. Barker, A. Dasgupta and M. Pecht, ASME Winter Annual Meeting, December 10-15, 1989.

Time Resolved Infrared Radiometry of Laser-Heated Silicon, K. Cho and C. Davis, IEEE Journal of Quantum Electronics, Vol. 25 (5), May 1989.

Verification of Thermal Analysis of PWBs for RAMCAD, J. Gore, M. DiMarzo, C. Resch, and M. Pecht, 1989 Proceedings Annual Reliability and Maintainability Symposium, pp. 474-478, 1989.

Component-Placement Optimization for Convectively Cooled Electronics, D. Dancer and M. Pecht, IEEE Transactions on Reliability, Vol. 38, No. 2, June 1989.

Concurrent Design, M. Pecht, Reliability and Maintainability in Computer-Aided Engineering Workshop, 1988. R&M - CAE, 1988 Proceedings, pp. 45-48, 27-29 September 1988.

Intelligent derating for reliability, IEEE International Symposium on Intelligent Control, Proceedings, pp. 98-102, August 24-26, 1988.

What Research is Underway to Advance R&M Automation for Electronics? M. Pecht, IEEE Transactions on Reliability, Vol. R-36, No.5, pp. 516-520, December 1987.

Aging of Thermoplastics, Mechanics Research Communications, M. Pecht, Mechanics Research Communication, Vol. 12, No. 1, pp. 11-18, 1985.

The Strain Response of Paper Under Various Constant Regain States, M. Pecht and M. Johnson Jr., Tappi Journal, pp. 90-93, Jan 1985.

Creep of Regain-Rheologically Simple Hydrophilic Polymers, M. Pecht, Journal of Strain Analysis, Vol. 20, No. 3, pp. 179-181, 1985.

Reliability of InGaAs HEMTs on GaAs Substrates, A. Christou, J. Hu, and W. Anderson, 1985.