sidd@umd.edu | (301)-405-6633
Prof. Siddhartha Das joined the Department of Mechanical Engineering, University of Maryland, College Park in March, 2014 as an assistant professor. He received his Ph.D. from the Indian Institute of Technology Kharagpur in 2010 in the area of theoretical microfluidics. Following his Ph.D., Prof. Das joined the Physics of Fluids Group in University of Twente, the Netherlands as a Postdoc and worked on surface nanobubbles, capillarity and soft wetting. After his stint in the Netherlands, Prof. Das went for his second Postdoc in the Department of Mechanical Engineering, University of Alberta, Canada. In Alberta, Prof. Das was honored with the Banting Postdoctoral Fellowship, the most prestigious postdoctoral fellowship of Canada. His research interests span different areas of micro-nanoscale fluid mechanics and interactions of soft matter and complex interfaces with fluid mechanics.
 
 

 

Current Students
Name Research Area
Beihan Zhao 3D Printing with CNT Based Inks
Yanbin Wang Fabrication and Characterization of CNT-based Ink and Syringe Printing of CNT-based Composites
Vishal Sankar Sivasankar Modeling of Aerosol Jet Printing Process
Chenglin Yi (Postdoc) Aerosol Jet 3D Printing for Comfortable Surfaces

Recent Publications

Flexible, Bio-Compatible Nanofluidic Ion Conductor, Chengwei Wang, Sha Wang, Guang Chen, Weiqing Kong, Weiwei Ping, Jiaqi Dai, Glenn Pastel, Hua Xie, Shuaiming He, Siddhartha Das, and Liangbing Hu, Chemistry of Materials, PP, 19 October, 2018, DOI: 10.1021/acs.chemmater.8b03006.

 

Direct-Write Printed, Solid-Core Solenoid Inductors with Commercially Relevant Inductances, Yaun Gu, Donghun Park, David Bowen, Siddhartha Das, and Daniel R. Hines, Advanced Materials Technologies, PP. 1-7, 1800312, DOI: 10.1002/admt.201800312.

The Effect of Droplet Sizes on Overspray in Aerosol-Jet Printing, Guang Chena, Yuan Gua, Harvey Tsangb, Daniel R. Hinesc, and Siddhartha Das, Advanced Engineering Materials, PP. 1-13, 2018, DOI: 10.1002/adem.201701084. 

Inkwells for on-demand deposition rate measurement in aerosol-jet based 3D printing, Yuan Gu, David Gutierrez, Siddhartha Das, and D. R. Hines, Journal of Micromechanics and Microengineering, Vol. 29, Issue 9, PP. 1.9, August 22, 2017. 

Aerosol-Jet Printed Fillets for Well-Formed Electrical Connections between Different Leveled Surfaces, Yuan Gu, Daniel R. Hines, Victor Yun, Michael Antoniak, and Siddhartha Das, Advanced Materials Technologies, Vol. 2, Issue 11, PP. 1-9, September 21, 2017. 

 

 

Top